Abstract:The monitoring of potassium ion (K+) levels in human sweat can provide valuable insights into electrolyte balance and muscle fatigue non-invasively. However, existing laboratory techniques for sweat testing are complex, while wearable sensors face limitations like drift, fouling and interference from ions such as Na+. This work develops printed electrodes using β-cyclodextrin functionalized reduced graphene oxide (β-CD-RGO) for selective K+ quantification in sweat. The β-CD prevents the aggregation of RGO sheets while also providing selective binding sites for K+ capture. Electrodes were fabricated by screen printing the β-CD-RGO ink onto conductive carbon substrates. Material characterization confirmed the successful functionalization of RGO with β-CD. Cyclic voltammetry (CV) showed enhanced electrochemical behavior for β-CD-RGO-printed electrodes compared with bare carbon and RGO. Sensor optimization resulted in a formulation with 30% β-CD-RGO loading. The printed electrodes were drop-casted with an ion-selective polyvinyl chloride (PVC) membrane. A linear range from 10 μM to 100 mM was obtained along with a sensitivity of 54.7 mV/decade. The sensor showed good reproducibility over 10 cycles in 10 mM KCl. Minimal interference from 100 mM Na+ and other common sweat constituents validated the sensor's selectivity. On-body trials were performed by mounting the printed electrodes on human subjects during exercise. The K+ levels measured in sweat were found to correlate well with serum analysis, demonstrating the sensor's ability for non-invasive electrolyte monitoring. Overall, the facile synthesis of stable β-CD-RGO inks enables the scalable fabrication of wearable sensors for sweat potassium detection.

Disposable Blood Potassium Sensors Based on Screen-Printed Thick Film Electrodes

All-solid-state blood calcium sensors based on screen-printed poly(3,4-ethylenedioxythiophene) as the solid contact

All-Solid-State Carbonate-Selective Electrode Based on Screen-Printed Carbon Paste Electrode

A Paper-Based Microfluidic Device for Real-Time Sweat Potassium Monitoring

Disposable L-Lactate Biosensor Based on A Screen-Printed Carbon Electrode Enhanced by Graphene

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

A Hydrogen Peroxide Sensor Prepared By Electropolymerization Of Pyrrole Based On Screen-Printed Carbon Paste Electrodes

Electrochemical Non-Enzymatic Sensing of Glycoside Toxins by Boronic Acid Functionalized Nano-Composites on Screen-Printed Electrode

Study of Alcohol Biosensor Based on Screen-Printed Carbon Electrodes Modified by Gold Nanoparticles

Study of Fabrication Conditions of ATP Biosensor Based on Screen-Printed Electrode

An Enzyme-Metal-Insulator-Silicon Structured Sensor Using Surface Photovoltage Technology for Potentiometric Glucose Detection

Screen-printed Potentiometric Strip for Calcium Ion Determination in Water and Milk

An all-solid-state screen-printed carbon paste reference electrode based on poly(3,4-ethylenedioxythiophene) as solid contact transducer

Preparation of β-Cyclodextrin Functionalized Platform for Monitoring Changes in Potassium Content in Perspiration

Microfluidic-based ion-selective thermoplastic electrode array for point-of-care detection of potassium and sodium ions

Direct fluorescent measurement of blood potassium with polymeric optical sensors based on upconverting nanomaterials.

A disposable cobalt-based phosphate sensor based on screen printing technology

High-Performance Potassium-Selective Biosensor Platform Based on Resistive Coupling of a-IGZO Coplanar-Gate Thin-Film Transistor

Fabrication and Characterization of Potassium Ion-Selective Electrode Based on Porous Silicon

Conductive Polymer Nanoparticles as Solid Contact in Ion-Selective Electrodes Sensitive to Potassium Ions