Abstract:Recent advances in thulium doped fibers have significantly improved the optical conversion efficiencies, indicating their potential utility for a variety of applications. Recently, kilowatt-class fiber amplifiers have been demonstrated with narrow linewidth operation. However, their limitations in scaling to higher powers aren’t well understood. While thermal mode instability (TMI) is a well-known limitation in ytterbium doped fiber amplifiers, no experimental data exists for CW thulium doped fiber amplifiers. As such, it’s difficult to quantify or predict when this limitation is expected to impact TDFA’s. Here, we report on the first measurements of TMI in CW thulium doped fiber amplifiers. We characterize the TMI threshold of both 20μm and 25μm fibers by measuring the beam quality, relative intensity noise (RIN), and polarization extinction ratio (PER). In particular, a strong dependence on the TMI threshold with the fiber length is noted. Counter intuitively, measurements show that short fibers have significantly higher TMI thresholds than longer fiber lengths; indeed doubling the fiber length can reduce the TMI threshold by almost 50%. By optimizing the fiber length, a 20/400μm thulium doped fiber amplifier is scaled to 905W, with 57% optical conversion efficiency and a linewidth 5 GHz.

2.43 Kw Narrow Linewidth Linearly Polarized All-Fiber Amplifier Based on Mode Instability Suppression

Study on the power scaling and mode instability property in an all-fiber narrow-linewidth tapered fiber amplifier

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

Kilowatt-level ytterbium-Raman fiber amplifier with a narrow-linewidth and near-diffraction-limited beam quality

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

kW-level monolithic single-mode narrow-linewidth all-solid photonic bandgap fiber amplifier

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

252 W core-pumped single-frequency all-fiber amplifier at 1064 nm

Low-threshold mode instability in few-mode Yb3+-doped fiber amplifiers: an overview of recent results

Confined-doped fiber enabled kilowatt-level all-fiber laser with 1.28 GHz linewidth

Power scaling of high-power linearly polarized fiber lasers with <10 GHz linewidth

Kw-Level 1030 Nm Polarization-Maintained Fiber Laser with Narrow Linewidth and Near-Diffraction-limited Beam Quality.

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

3 Kw Narrow-Linewidth All-Fiber Amplifier with Near Diffraction Limited Beam Quality

High fidelity amplification of radially-polarized laser in few-mode polarization-maintaining fiber amplifier

Mode instability in kW-class thulium doped fiber amplifiers

700 W single-frequency all-fiber amplifier at 1064 nm with kHz-level spectral linewidth

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Towards tapered Yb-doped fiber-based narrow linewidth single-mode fiber laser with high signal to Raman ratio

Nanosecond pulse pumped, fiber-integrated narrow linewidth linearly polarized Raman amplifier at 1120 nm