Abstract:Coal-fired mercury pollution poses an escalating threat to the ecosystem and human health. In this study, we designed and prepared transition metal oxides (MO x ) supported non-carbon-based adsorbents for Hg 0 removal using non-thermal plasma, based on the mechanism of Hg 0 removal. Specifically, MO x supported SiO 2 adsorbents were examined to explore the correlation between their redox ability and Hg 0 removal. The plasma treatment process could enhance the catalytic oxidation activity of the MO x (oxygen activation center) and effectively enhance Hg 0 removal efficiency. The Hg 0 removal efficiencies of Co 3 O 4 /SiO 2 -P and CrO x /SiO 2 -P prepared by plasma could maintain above 95.0 % and 85.0 % in the whole test, whereas the Co 3 O 4 /SiO 2 and CrO x /SiO 2 adsorbents prepared by traditional incipient wetness impregnation method exhibited lower Hg 0 removal efficiencies of nearly 20–30 %. Furthermore, with the addition of SO 2 , the Hg 0 removal performance of Co 3 O 4 /SiO 2 -P decreased significantly, while the performance of CrO x /SiO 2 -P remained relatively unchanged. Characterization results containing X-ray photoelectron spectroscopy (XPS) and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) showed that the oxygen activation centers on CrO x /SiO 2 -P exhibited excellent resistance to SO 2 and were less susceptible to SO 2 occupation than those on Co 3 O 4 /SiO 2 -P. The plasma-prepared CrO x /SiO 2 -P adsorbents demonstrate promising potential for industrial applications in Hg 0 removal.

Treatment of V<sub>2</sub>O<sub>5</sub>/TiO<sub>2</sub> by Non-Thermal Plasma: Changes in Surface Characters and Mercury Oxidation Activity

Treatment of V2O5/TiO2 by Non-Thermal Plasma: Changes in Surface Characters and Mercury Oxidation Activity

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Removal of Elemental Mercury from Simulated Flue Gas by Combining Non-thermal Plasma with Calcium Oxide

Investigation on Elemental Mercury Oxidation Mechanism by Non-Thermal Plasma Treatment

Plasma-assisted adsorption of elemental mercury on CeO<sub>2</sub>/TiO<sub>2</sub> at low temperatures

Plasma-assisted Adsorption of Elemental Mercury on CeO2/TiO2 at Low Temperatures

Surface modification of fly ash by non-thermal air plasma for elemental mercury removal from coal-fired flue gas

Elemental Mercury Removal over CeO2/TiO2 Catalyst Prepared by Sol–Gel Method

[Removal of Gaseous Elemental Mercury over Cerium Doped Low Vanadium Loading V2O5-WO3/TiO2 in Simulated Coal-Fired Flue Gas].

Photochemical Removal of Gaseous Elemental Mercury in a Dielectric Barrier Discharge Plasma Reactor

Plasma-induced adsorption of elemental mercury on TiO 2 supported metal oxide catalyst at low temperatures

Removal of gaseous elemental mercury over a CeO2–WO3/TiO2 nanocomposite in simulated coal-fired flue gas

The Progress of V<sub>2</sub>O<sub>5</sub>/TiO<sub>2</sub>-Based Catalyst in Hg<sup>0</sup> Removal and PCCD/Fs Decomposition

Mercury Removal over the Vanadia–titania Catalyst in CO2-enriched Conditions

The Progress Of V2o5/Tio2-Based Catalyst In Hg-0 Removal And Pccd/Fs Decomposition1`

Research progress on elemental mercury (Hg0) removal in flue gas using non-thermal plasma technology

Progress in Catalytic Oxidation Technology for Element Mercury in Coal-fired Flue Gas

Preparation of highly active and SO 2 -resistant Cr-based non-carbon adsorbents via plasma for elemental mercury removal

Mercury Oxidation During Coal Combustion by Injection of Vanadium Pentoxide (V2O5)

Mercury oxidized by V2O5–MoO3/TiO2 under multiple components flue gas: An actual coal-fired power plant test and a laboratory experiment

Treatment of V&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;5&lt;/sub&gt;/TiO&lt;sub&gt;2&lt;/sub&gt; by Non-Thermal Plasma: Changes in Surface Characters and Mercury Oxidation Activity