Abstract:A bench-scale reactor consisting of a natural gas burner and an electrically heated reactor housing a selective catalytic reduction (SCR) catalyst was constructed for studying elemental mercury (Hg(o)) oxidation under SCR conditions. A low sulfur Powder River Basin (PRB) subbituminous coal combustion fly ash was injected into the entrained-flow reactor along with sulfur dioxide (SO2), nitrogen oxides (NOx), hydrogen chloride (HCl), and trace Hg(o). Concentrations of Hg(o) and total mercury (Hg) upstream and downstream of the SCR catalyst were measured using a Hg monitor. The effects of HCl concentration, SCR operating temperature, catalyst space velocity, and feed rate of PRB fly ash on Hg(o) oxidation were evaluated. It was observed that HCl provides the source of chlorine for Hg(o) oxidation under simulated PRB coal-fired SCR conditions. The decrease in Hg mass balance closure across the catalyst with decreasing HCl concentration suggests that transient Hg capture on the SCR catalyst occurred during the short test exposure periods and that the outlet speciation observed may not be representative of steady-state operation at longer exposure times. Increasing the space velocity and operating temperature of the SCR led to less Hg(o) oxidized. Introduction of PRB coal fly ash resulted in slightly decreased outlet oxidized mercury (Hg2+) as a percentage of total inlet Hg and correspondingly resulted in an incremental increase in Hg capture. The injection of ammonia (NH3) for NOx reduction by SCR was found to have a strong effect to decrease Hg oxidation. The observations suggest that Hg(o) oxidation may occur near the exit region of commercial SCR reactors. Passage of flue gas through SCR systems without NH3 injection, such as during the low-ozone season, may also impact Hg speciation and capture in the flue gas.

Mercury Oxidation During Coal Combustion by Injection of Vanadium Pentoxide (V2O5)

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Mechanistic Investigation on the Hg0 Elimination Ability of MnOx–CeOx Nanorod Adsorbents: Effects of Mn/Ce Molar Ratio

Mechanistic study on the role of VOx in the acidity, oxidizability, and Hg0 capture capability of FeOx-VOx binary mixed oxides

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Effects of CO and CO2 on the Removal of Elemental Mercury over Carbonaceous Surfaces

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas

Mercury Speciation and Fine Particle Size Distribution on Combustion of Chinese Coals

Oxidation and Stabilization of Elemental Mercury from Coal-Fired Flue Gas by Sulfur Monobromide

Mercury oxidation promoted by a selective catalytic reduction catalyst under simulated Powder River Basin coal combustion conditions

Performance of CuO x –neutral Al 2 O 3 sorbents on mercury removal from simulated coal combustion flue gas

Elemental Mercury Oxidation over Manganese-Based Perovskite-Type Catalyst at Low Temperature

Preliminary Study on Oxidation of Elemental Mercury in the Presence of Gaseous Oxidants

Mercury Removal over the Vanadia–titania Catalyst in CO2-enriched Conditions

Elemental mercury oxidation in an electrostatic precipitator enhanced with in situ soft X-ray irradiation.

Study on catalysts for catalytic oxidation of gaseous elemental mercury

Progress in Catalytic Oxidation Technology for Element Mercury in Coal-fired Flue Gas

Elemental Mercury Removal over CeO2/TiO2 Catalyst Prepared by Sol–Gel Method

Hg occurrence in coal and its removal before coal utilization

Efficient Removal of Elemental Mercury from Coal-Fired Flue Gas over Sulfur-Containing Sorbent at Low Temperatures

Using Bromine Gas to Enhance Mercury Removal from Flue Gas of Coal-Fired Power Plants