Rogue Waves in a Tm Fiber Laser Mode-Locked by Monolayer MoS2 Saturable Absorber

Pan Wang,Dake Hu,Liying Jiao,Changxi Yang

DOI: https://doi.org/10.1364/nlo.2017.nw4a.5

2017-01-01

Nonlinear Optics

Abstract:We report on observation of rogue waves in a Tm-doped fiber laser based on monolayer molybdenum disulfide (MoS2) saturable absorber. The proportion of the RWs exceeds 0.11% of the recorded events with appropriate cavity parameters.

What problem does this paper attempt to address?

Dissipative Rogue Waves among Noise-Like Pulses in a Tm Fiber Laser Mode Locked by a Monolayer MoS2 Saturable Absorber

Pan Wang,Dake Hu,Kangjun Zhao,Liying Jiao,Xiaosheng Xiao,Changxi Yang

DOI: https://doi.org/10.1109/jstqe.2017.2749972

IF: 4.9

2017-01-01

IEEE Journal of Selected Topics in Quantum Electronics

Abstract:We report on the experimental and numerical investigations of dissipative rogue waves (DRWs) among noise-like pulses, in a thulium-doped fiber laser mode locked by a monolayer MoS2 saturable absorber. By increasing the pumping power or weakening the effective cavity spectral filtering, the statistics distributions of the pulse events deviate from the Gaussian statistics to the L-shaped distributions with long tail, accompanied by the increase of the DRWs proportion. Our observations reveal the dissipative nature of rogue waves in dissipative systems.
Generation of trapezoidal envelope pulses and soliton rains from passively mode-locked fiber laser with MoS2 saturable absorber on microfiber

Zhenhong Wang,Ruijing He,Yange Liu,Hao Zhang,Simeng Han,Hongye Li,Guangdou Wang,Guang Yang,Zhi Wang

DOI: https://doi.org/10.7567/APEX.11.072504

IF: 2.819

2018-01-01

Applied Physics Express

Abstract:We report the generation of trapezoidal envelope pulses and soliton rains in an erbium-doped fiber laser with an MoS2-deposited microfiber saturable absorber. The pulse duration of the trapezoidal envelope pulses increases from 7 to 95 ns with the increment of the pump power. The maximum intracavity pulse energy is as high as 34 nJ. At a low pump power, the proposed laser can be switched to the soliton-rains regime by properly changing the polarization states. The microfiber-based MoS2 all-fiber laser can serve as an optical source with improved pulse energy for potential applications in nonlinear dynamics. (c) 2018 The Japan Society of Applied Physics.
Multi-wavelength Solitons Delivered by an Evanescent-Field Device Based on Polarization-Sensitive MoTe2 Micro-Sheets

X. Han,X. Hu,L. Feng,X. Yan,C. Wang,Y. Xia,X. Wang,T. Huang

DOI: https://doi.org/10.1364/ome.437434

2021-01-01

Optical Materials Express

Abstract:Multi-wavelength fiber lasers have the advantages of low cost, easy integration withfiber systems, and wide tunable range, which is the key component of dense wavelength divisionmultiplexing (DWDM). 2D MoTe2micro-sheets have drawn lots of researchers' attention due totheir anisotropic layered structure and high optical adsorption. Evanescent-field (EF) deviceshave many applications in multi-wavelength and high-power fiber lasers. The integration ofMoTe2micro-sheets and an EF device is able to combine their advantages. Here, we reporton the experimental observation of multi-wavelength solitons based on EF interaction withpolarization-sensitive MoTe2micro-sheet. Dual-wavelength conventional solitons (CSs) andswitchable dual-wavelength dissipative solitons (DSs) are emitted by the proposed fiber laser.Different solitons can be effectively tuned by optimizing pump power and the state of thepolarization controller. The proposed EF device and fiber laser are convenient and attractive inthe fields of fiber-based sensing, frequency comb spectroscopy, and DWDM
980-nm Q-switched photonic crystal fiber laser by MoS 2 saturable absorber

Pingxue Li,Boxing Liang,Meng Su,Yuefei Zhang,Yan Zhao,Mengmeng Zhang,Chunmei Ma,Ning Su

DOI: https://doi.org/10.1007/s00340-016-6433-9

2016-01-01

Applied Physics B

Abstract:We demonstrate a 980-nm Q-switch Yb-doped photonic crystal fiber laser by a multilayer molybdenum sulfide polymer composite as the broadband saturable absorber which is prepared by the chemical vapor deposition method. We achieve passively Q-switching operations at 978 nm with the pulse width of 2.7 and 0.63 μs, corresponding to the repetition rate of 212 and 221 kHz, respectively. The maximum output power is 127 mW. It is the first time that MoS 2 Q-switched Yb-doped photonic crystal fiber laser at 980 nm is demonstrated. The experimental results show that few-layer MoS 2 is a promising broadband saturable absorber material.
Wideband saturable absorption in few-layer molybdenum diselenide (MoSe2) for Q-switching Yb-, Er- and Tm-doped fiber lasers

R. I. Woodward,R. C. T. Howe,T. H. Runcorn,G. Hu,F. Torrisi,E. J. R. Kelleher,T. Hasan

DOI: https://doi.org/10.1364/OE.23.020051

2015-06-12

Abstract:We fabricate a free-standing molybdenum diselenide (MoSe2) saturable absorber by embedding liquid-phase exfoliated few-layer MoSe2 flakes into a polymer film. The MoSe2-polymer composite is used to Q-switch fiber lasers based on ytterbium (Yb), erbium (Er) and thulium (Tm) gain fiber, producing trains of microsecond-duration pulses with kilohertz repetition rates at 1060 nm, 1566 nm and 1924 nm, respectively. Such operating wavelengths correspond to sub-bandgap saturable absorption in MoSe2, which is explained in the context of edge-states, building upon studies of other semiconducting transition metal dichalcogenide (TMD)-based saturable absorbers. Our work adds few-layer MoSe2 to the growing catalog of TMDs with remarkable optical properties, which offer new opportunities for photonic devices.

Optics
Erbium-doped fiber laser mode-locked with a few-layer MoS2 saturable absorber

handing xia,heping li,changyong lan,chun li,xiaoxia zhang,shangjian zhang,yong liu

DOI: https://doi.org/10.1364/ACPC.2014.ATh3A.89

2014-01-01

Abstract:We demonstrate an erbium-doped fiber ring laser passively mode-locked by a CVD-grown few-layer MoS 2 saturable absorber. Stable soliton pulses centered at 1570.1 nm with pulse duration of 1.36 ps are achieved.
Erbium-Doped Fiber Laser Mode-Locked with a Few-Layer MoS<inf>2</inf> Saturable Absorber

Handing Xia,Heping Li,Changyong Lan,Chun Li,Xiaoxia Zhang,Shangjian Zhang,Yong Liu

2014-01-01

Abstract:We demonstrate an erbium-doped fiber ring laser passively mode-locked by a CVD-grown few-layer MoS <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> saturable absorber. Stable soliton pulses centered at 1570.1 nm with pulse duration of 1.36 ps are achieved.
Q-Switched Tm-doped Fiber Ring Laser Using Mo0.8W0.2S2 Saturable Absorber

Quan Hu,Junli Wang,Lei Chen,Haiting Yan,Lingjie Meng,Zhiyi Wei

DOI: https://doi.org/10.1117/12.2505313

2018-01-01

Abstract:Mixed molybdenum tungsten disulphide (MoxW(1-x)S(2) ), a new member of the transition metal dichalcogenides, has drawn much research attention in the photonic devices. In this work, we demonstrate a Q-switched Tm-doped fiber laser (TDF) using Mo0.8W0.2S2 polymer film as a saturable absorber (SA). Mo0.8W0.2S2 is obtained by microwave-assisted solvothermal method and its nanosheets are embedded into a polyvinyl alcohol (PVA) film. The film SA is sandwiched between two fiber connectors and is inserted into the all-fiber TDF laser cavity. The total cavity length of TDF is 30m and a 4 m Tm-doped fiber is used as the gain medium. The TDF is pumped by a multimode 793nm laser diode (LD). Use the polarization controller (PC) to change the polarization states, a relatively stable Q-switched pulse train are realized when the pump power up to 2.17 W. The output power of the oscillator increase from 4.4 mW to 7.3 mW with the pulse repetition rate from 11.9 kHz to 15.7 kHz. In addition, the shortest pulse duration of 11.7 mu s generated with the pump power of 2.26W.
Mos2 Nanoflowers As High Performance Saturable Absorbers for an All-Fiber Passively Q-Switched Erbium-Doped Fiber Laser

Rongfei Wei,Hang Zhang,Xiangling Tian,Tian Qiao,Zhongliang Hu,Zhi Chen,Xin He,Yongze Yu,Jianrong Qiu

DOI: https://doi.org/10.1039/c5nr08457a

IF: 6.7

2016-01-01

Nanoscale

Abstract:Strong saturable absorption was observed in MoS2 nanoflowers, which were synthesized by a facile solvothermal method. A MoS2 nanoflower-based saturable absorber with a high modulation depth of 51.8% and a large saturable intensity of 275.5 GW cm(-2) was introduced to the application of passively Q-switched fiber laser generation. Stable passively Q-switched fiber laser pulses at 1.56 mu m with a low threshold power of 16.10 mW, high signal-to-noise ratio of 52.5 dB and short pulse duration of 1.9 mu s were obtained. More importantly, a high output power of 3.10 mW related to a large pulse energy of about 51.84 nJ can be attained at a very low pump power. The efficiency of the laser reaches 4.71%, which is larger than that of the prepared layered MoS2 and recently reported MoS2-based passively Q-switching operations. Such results imply that the MoS2 nanoflowers are an excellent candidate for a saturable absorber in passively Q-switched fiber lasers at a low pump intensity.
463-MHz fundamental mode-locked fiber laser based on few-layer MoS(2) saturable absorber.

Kan Wu,Xiaoyan Zhang,Jun Wang,Jianping Chen

DOI: https://doi.org/10.1364/OL.40.001374

IF: 3.6

2015-01-01

Optics Letters

Abstract:We report on the passive-mode-locking operation of a fiber laser with a fundamental repetition rate of 463MHz based on molybdenum disulfide (MoS2) saturable absorber (SA). By embedding MoS2 into polyvinyl alcohol (PVA) thin film, MoS2-PVA SA was prepared with a modulation depth of 2.7% and a saturation intensity of 137 MW/cm(2). The mode-locked fiber laser-employed MoS2-PVA SA was achieved with center wavelength of 1556.3 nm, 3-dB bandwidth of 6.1 nm, output power of 5.9 mW, and an extinction ratio of up to 97 dB in the RF spectrum. The demonstration of mode-locking operation with high fundamental repetition rate and high spectral purity indicates that MoS2-PVA SA can be a good candidate for high-precision ultrafast applications. (C) 2015 Optical Society of America
Mode-Locked Er-Doped Fiber Laser by Using MoS 2 /SiO 2 Saturable Absorber

Lu Li,Ruidong Lv,Zhendong Chen,Jiang Wang,Sicong Liu,Wei Ren,Yonggang Wang

DOI: https://doi.org/10.1186/s11671-019-2888-z

2019-01-01

Nanoscale Research Letters

Abstract:The two-dimensional (2D) layered material MoS 2 has attracted numerous attentions for electronics and optoelectronics applications. In this work, a novel type of MoS 2 -doped sol-gel glass composite material is prepared. The nonlinear optical properties of prepared MoS 2 /SiO 2 composite material are measured with modulation depth (ΔT) of 3.5% and saturable intensity (I sat ) of 20.15 MW/cm 2 . The optical damage threshold is 3.46 J/cm 2 . Using the MoS 2 /SiO 2 composite material as saturable absorber (SA), a passive mode-locked Er-doped fiber (EDF) laser is realized. Stable conventional soliton mode-locking pulses are successfully generated with a pulse width of 780 fs at the pump power of 90 mW. In the pump power range of 100–600 mW, another stable mode-locking operation is obtained. The pulse width is 1.21 ps and the maximum output power is 5.11 mW. The results indicate that MoS 2 /SiO 2 composite materials could offer a new way for optical applications.
Mode-Locked Thulium Fiber Laser with Mos2

Zhen Tian,Kan Wu,Lingchen Kong,Nan Yang,Yao Wang,Rong Chen,Weisheng Hu,Jianqiu Xu,Yulong Tang

DOI: https://doi.org/10.1088/1612-2011/12/6/065104

IF: 1.704

2015-01-01

Laser Physics Letters

Abstract:Liquid-phase exfoliated 2D material multilayer MoS2 is transferred onto a gold mirror and its saturable absorption at the 2 mu m wavelength region is experimentally observed. This transferred MoS2 saturable absorber has a modulation depth of 13.6% and a saturation intensity of 23.1 MW cm(-2). This saturable absorber is integrated into a linear Tm3+ fiber laser cavity, and stable fundamental-frequency mode-locking operation is realized at 2 mu m with pulse energy of 15.5 nJ, pulse width of similar to 843 ps, and a repetition rate of 9.67 MHz. The laser spectral width is similar to 17.3 nm with a center wavelength of 1905 nm. This first presence of mode-locking with multilayer MoS2 sheets in the 2 mu m wavelength region verifies that multilayer MoS2 is a good candidate for broadband mode-locking comparable to graphene, as well as a good mode-locker for achieving high pulse energy.
Stable Nanosecond-Pulse Fiber Lasers Mode-Locked with Molybdenum Diselenide

Hu Liang,Yange Liu,Ruijing He,Hongye Li,Zhi Wang

DOI: https://doi.org/10.1109/lpt.2018.2874429

IF: 2.6

2018-01-01

IEEE Photonics Technology Letters

Abstract:We report on the formation of the nanosecond pulse in an erbium-doped fiber laser mode-locked with a molybdenum diselenide (MoSe2)-deposited microfiber. The evolution of the pulse states from slightly chirped picosecond pulse to highly chirped nanosecond pulse was observed. As the pump power increases to a certain value, the picosecond pulse abruptly transforms into nanosecond pulse with the pulse duration of 70 ns and the maximum pulse energy of 21 nJ at the fundamental repetition rate of 3.54 MHz. With the advantages of high pulse energy, large pulse duration, and low peak power, the nanosecond pulse could be destined for amplification and compression to achieve high-power applications promisingly.
463-Mhz Fundamental Mode-Locked Fiber Laser Based on Few-Layer MoS_2 Saturable Absorber

Kan Wu,Xiaoyan Zhang,Jun Wang,Jianping Chen

DOI: https://doi.org/10.1364/ol.40.001374

2015-01-01

Abstract:We report on the passive-mode-locking operation of a fiber laser with a fundamental repetition rate of 463 MHz based on molybdenum disulfide (MoS(2)) saturable absorber (SA). By embedding MoS(2) into polyvinyl alcohol (PVA) thin film, MoS(2)-PVA SA was prepared with a modulation depth of 2.7% and a saturation intensity of 137 MW/cm(2). The mode-locked fiber laser-employed MoS(2)-PVA SA was achieved with center wavelength of 1556.3 nm, 3-dB bandwidth of 6.1 nm, output power of 5.9 mW, and an extinction ratio of up to 97 dB in the RF spectrum. The demonstration of mode-locking operation with high fundamental repetition rate and high spectral purity indicates that MoS(2)-PVA SA can be a good candidate for high-precision ultrafast applications.
Digital-wavelength ytterbium fiber laser mode-locked with MoS2

Shiwei Wang,Yan Zhou,Yao Wang,Shuo Yan,Yue Li,W.G. Zheng,Ying Deng,Qihua Zhu,Jianqiu Xu,Yulong Tang

DOI: https://doi.org/10.1088/1612-2011/13/5/055102

IF: 1.704

2016-01-01

Laser Physics Letters

Abstract:In this letter, we report a digital-wavelength ytterbium-doped fiber laser passively mode-locked with layered molybdenum disulfide (MoS2). The MoS2 based saturable absorber (SA) is made by solution coating the MoS2 solution on a gold mirror, showing modulation depth and saturation intensity of 11.4% and 1.37 MW cm(-2), respectively. The output pulse has duration of similar to 300 ps, 3 dB spectral width of similar to 0.5 nm and maximum output power of 2.6 mW. The mode-locked fundamental frequency is 2.67 MHz with a similar to 36 dB signal-to-noise ratio. Through tuning the polarization controller (PC) and squeezing/stretching the single mode fiber in the ring cavity, four-bit digital wavelength emission is achieved. It is proposed that the digital-wavelength tuning feature of fiber lasers can be employed in coding and signal processing.
MoS2 Q-switched 2.8 Μm Er:ZBLAN Fiber Laser

Shiwei Wang,Yulong Tang,Jianlong Yang,Haizhe Zhong,Dianyuan Fan

DOI: https://doi.org/10.1088/1555-6611/aaf642

IF: 1.2

2019-01-01

Laser Physics

Abstract:Since the invention of graphene, two-dimensional (2D) materials have attracted great interest in both fundamental science and potential applications. Here, we report the saturable absorption features of 2D (multilayered structure) molybdenum disulfide (MoS2) in the mid-infrared (mid-IR) wavelength region, and use it to passively Q-switch an Er3+-doped ZBLAN fiber laser at 2.8 mu m. This MoS2 saturable absorber has a moderate modulation depth of 5% at 2.8 mu m, making it an appropriate candidate for light modulating in the mid-IR spectral range. In stable Q-switching, the Er3+-doped ZBLAN fiber laser is widely tuned in both repetition rate and pulse width. Through increasing pump power, the repetition rate and pulse duration are monotonically tuned from 36 to 70 kHz and from 1.84 mu s to 806 ns, respectively. The maximum average power is 140 mW (at 70 kHz), giving a pulse energy of 2 mu J and peak power of similar to 2.48 W. Successful Q-switching operation of this 2.8 mu m fiber laser confirms that 2D MoS2 has great potentials as efficient light modulating elements in mid-IR regions.
Q-switched Fiber Laser Based on Transition Metal Dichalcogenides MoS(2), MoSe(2), WS(2), and WSe(2).

Bohua Chen,Xiaoyan Zhang,Kan Wu,Hao Wang,Jun Wang,Jianping Chen

DOI: https://doi.org/10.1364/oe.23.026723

IF: 3.8

2015-01-01

Optics Express

Abstract:In this paper, we report 4 different saturable absorbers based on 4 transition metal dichalcogenides (MoS(2), MoSe(2), WS(2), WSe(2)) and utilize them to Q-switch a ring-cavity fiber laser with identical cavity configuration. It is found that MoSe(2) exhibits highest modulation depth with similar preparation process among four saturable absorbers. Q-switching operation performance is compared from the aspects of RF spectrum, optical spectrum, repetition rate and pulse duration. WS(2) Q-switched fiber laser generates the most stable pulse trains compared to other 3 fiber lasers. These results demonstrate the feasibility of TMDs to Q-switch fiber laser effectively and provide a meaningful reference for further research in nonlinear fiber optics with these TMDs materials.
Real-time observation of optical rogue waves in spatiotemporally mode-locked fiber lasers

Uğur Teğin,Peng Wang,Lihong V. Wang

DOI: https://doi.org/10.1038/s42005-023-01185-1

2023-04-06

Communications Physics

Abstract:Fiber lasers offer tabletop nonlinear environments to mimic and study the complex dynamics of nature. Optical rogue waves, rarely occurring extreme intensity fluctuations, are one of the many subjects that can be investigated with a fiber laser cavity. Although oceanic rogue waves are a result of spatiotemporal dynamics, the single-mode nature of the fiber laser and the commonly used measurement techniques limit the optical rogue wave studies to only temporal dynamics. In this study, we overcome such limit to observe rogue wave real-time dynamics in spatiotemporally mode-locked fiber lasers by utilizing state-of-the-art compressed ultrafast photography technique. The multimode laser cavity exhibits long-tailed non-Gaussian distributions under relaxed cavity constraints. Single-shot spatiotemporal measurements of rogue events showed that, instead of noise bursts, the cavity produces clean pulses with high-quality beam profiles. Our results indicate that rogue events in spatiotemporally mode-locked fiber lasers undergo nonlinear spatial transformation due to a power-dependent consistent attractor.

physics, multidisciplinary
Ultrafast Erbium-Doped Fiber Laser Mode-Locked by a CVD-grown Molybdenum Disulfide (mos_2) Saturable Absorber

Handing Xia,Heping Li,Changyong Lan,Chun Li,Xiaoxia Zhang,Shangjian Zhang,Yong Liu

DOI: https://doi.org/10.1364/oe.22.017341

IF: 3.8

2014-01-01

Optics Express

Abstract:We demonstrate an erbium-doped fiber laser passively mode-locked by a multilayer molybdenum disulfide (MoS(2)) saturable absorber (SA). The multilayer MoS(2) is prepared by the chemical vapor deposition (CVD) method and transferred onto the end-face of a fiber connector. Taking advantage of the excellent saturable absorption of the fabricated MoS(2)-based SA, stable mode locking is obtained at a pump threshold of 31 mW. Resultant output soliton pulses have central wavelength, spectral width, pulse duration, and repetition rate of 1568.9 nm, 2.6 nm, 1.28 ps, and 8.288 MHz, respectively. The experimental results show that multilayer MoS(2) is a promising material for ultrafast laser systems.
Passive Harmonic Mode-Locking of Er-Doped Fiber Laser Using Cvd-Grown Few-Layer Mos2 As A Saturable Absorber

Xia Han-Ding,Li He-Ping,Lan Chang-Yong,Li Chun,Deng Guang-Lei,Li Jian-Feng,Liu Yong

DOI: https://doi.org/10.1088/1674-1056/24/8/084206

2015-01-01

Chinese Physics B

Abstract:Passive harmonic mode locking of an erbium-doped fiber laser based on few-layer molybdenum disulfide (MoS2) saturable absorber (SA) is demonstrated. The few-layer MoS2 is prepared by the chemical vapor deposition (CVD) method and then transferred onto the end face of a fiber connector to form a fiber-compatible MoS2 SA. The 20th harmonic mode-locked pulses at 216-MHz repetition rate are stably generated with a pulse duration of 1.42 ps and side-mode suppression ratio (SMSR) of 36.1 dB. The results confirm that few-layer MoS2 can serve as an effective SA for mode-locked fiber lasers.

Rogue Waves in a Tm Fiber Laser Mode-Locked by Monolayer MoS2 Saturable Absorber

Dissipative Rogue Waves among Noise-Like Pulses in a Tm Fiber Laser Mode Locked by a Monolayer MoS2 Saturable Absorber

Generation of trapezoidal envelope pulses and soliton rains from passively mode-locked fiber laser with MoS2 saturable absorber on microfiber

Multi-wavelength Solitons Delivered by an Evanescent-Field Device Based on Polarization-Sensitive MoTe2 Micro-Sheets

980-nm Q-switched photonic crystal fiber laser by MoS 2 saturable absorber

Wideband saturable absorption in few-layer molybdenum diselenide (MoSe2) for Q-switching Yb-, Er- and Tm-doped fiber lasers

Erbium-doped fiber laser mode-locked with a few-layer MoS2 saturable absorber

Erbium-Doped Fiber Laser Mode-Locked with a Few-Layer MoS<inf>2</inf> Saturable Absorber

Q-Switched Tm-doped Fiber Ring Laser Using Mo0.8W0.2S2 Saturable Absorber

Mos2 Nanoflowers As High Performance Saturable Absorbers for an All-Fiber Passively Q-Switched Erbium-Doped Fiber Laser

463-MHz fundamental mode-locked fiber laser based on few-layer MoS(2) saturable absorber.

Mode-Locked Er-Doped Fiber Laser by Using MoS 2 /SiO 2 Saturable Absorber

Mode-Locked Thulium Fiber Laser with Mos2

Stable Nanosecond-Pulse Fiber Lasers Mode-Locked with Molybdenum Diselenide

463-Mhz Fundamental Mode-Locked Fiber Laser Based on Few-Layer MoS_2 Saturable Absorber

Digital-wavelength ytterbium fiber laser mode-locked with MoS2

MoS2 Q-switched 2.8 Μm Er:ZBLAN Fiber Laser

Q-switched Fiber Laser Based on Transition Metal Dichalcogenides MoS(2), MoSe(2), WS(2), and WSe(2).

Real-time observation of optical rogue waves in spatiotemporally mode-locked fiber lasers

Ultrafast Erbium-Doped Fiber Laser Mode-Locked by a CVD-grown Molybdenum Disulfide (mos_2) Saturable Absorber

Passive Harmonic Mode-Locking of Er-Doped Fiber Laser Using Cvd-Grown Few-Layer Mos2 As A Saturable Absorber