Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

High Selectivity Wideband Balanced Filter Based on Modified Coupled Lines Structures

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Notice of Removal: Extended Stopband Balanced Filter with Asymmetrical Coupled Lines

Synthesis Design of High Selectivity Wideband Balanced Bandpass Filter Based on Parallel Coupled Lines

Dual‐wideband Bandstop Filter Using Stepped Impedance Coupled‐lines

Wideband Balanced Filters With Intrinsic Common-Mode Suppression Using Coplanar Strip Double-Sided Shunt-Stub Structures

High Selective Balanced Bandpass Filters Using End-Connected Conductor-Backed Coplanar Waveguide.

High-selectivity single-ended and balanced bandpass filters using ring resonators and coupled lines loaded with multiple stubs

High Selectivity Seventh-Order Wideband Bandpass Filter Using Coupled Lines and Open/shorted Stubs

A wideband balanced filtering coupled‐line coupler with improved directivity based on coupled microstrip–slotline

A planar three-section coupled-line high-selectivity wideband bandstop filter

High-selectivity Bandpass Filter Using Six Pairs of Quarter-Wavelength Coupled Lines

High Selectivity Bandpass Filter Using Three Pairs of Coupled Lines Loaded with Shorted Stubs

High-Selectivity Balanced Bandpass Filter with Mixed Electric and Magnetic Coupling

High common‐mode rejection balanced bandpass filter using novel coupling scheme and source‐loaded coupling technique

Design of compact balanced filters with wide DM upper stopband and CM rejection band based on semi‐circular patch

High Selectivity Quadruple‐mode Broadband Bandpass Filter with Source‐load Coupling

Compact Wideband Ltcc Bandstop Filter Using Vertical Coupled-Line Units

Wideband bandpass filter with ultra-wide stopband based on cross-shaped parallel coupled lines

A Novel Wideband Filtering Power Divider With Embedding Three-Line Coupled Structures.