Abstract:Pore-scale flow and heat transfer model is built for a volumetric solar receiver subjected to highly concentrated irradiation, in order to provide insight into the detailed thermal and hydrodynamic performance. Direct three-dimensional simulations on the coupled radiation-convection-conduction are performed based on the Weaire-Phelan structure which is used to represent the open-cell ceramic foam absorber. The energy conversion characteristics with two ceramic materials (SiC and Al2O3) are firstly predicted and compared. And then several cases focused on the control approaches for the optical property (absorption/reflection/emission) of the solar absorber are introduced and investigated, including gradient surface absorptivity, spectral selectivity, and combination design of semi-transparent and opaque configuration. The results show that a moderate volumetric effect can be achieved at very low inlet fluid velocity for both ceramic materials, however presenting low conversion efficiency. Increasing the inlet velocity could enlarge the thermal non-equilibrium between solid and fluid phases and lower the outlet temperature. SiC absorber shows improved performance compared to Al2O3 absorber, and the efficiency changes obviously with the inlet velocity, while a variation of 24% is found. The optical property of the absorber front region significantly affects the overall performance. Decreasing absorptivity design and spectral selective design both show positive impact, especially for the Al2O3 absorber with an increment by 33% in efficiency relative to the basic one. Among the different strategies, spectral selective improvement shows the best effectiveness. Besides, adding porous fused silica as the front absorber layer can effectively move the high-temperature area inward at a cost of small decrement in efficiency, herein, honeycomb structure shows preponderance compared to the foam silica.

Reticulated Porous Volumetric Solar Receiver Designs Guided by Normal Absorptance and Hemispherical Volumetric Emittance Investigations

Volumetric Solar Carbon Dioxide Receiver Designs with Geometric Parameters Optimized in Combination

Advances in porous volumetric solar receivers and enhancement of volumetric absorption

Experimental and Numerical Analysis of the Hydraulic and Thermal Performances of the Gradually-Varied Porous Volumetric Solar Receiver

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Analysis on the Effects of Different Receiver Structures and Porous Parameters on the Volumetric Effects and Heat Transfer Performance of Porous Volumetric Solar Receiver

Coupled Heat Transfer Performance of A High Temperature Cup Shaped Porous Absorber

Numerical Study on the Optical and Radiative Properties of the Gradually-Varied Volumetric Solar Receiver

Optimization of solar receivers for high-temperature solar conversion processes: Direct vs. Indirect illumination designs

Investigation and Optimization on Spectrally Selective Absorption for Enhanced Thermal Performance in Porous Volumetric Solar Receivers

Numerical Investigation on the Flow and Thermal Behaviors of the Volumetric Solar Receivers with Different Morphologies

Thermal Performance Characteristics of Porous Media Receiver Exposed to Concentrated Solar Radiation

Conceptual Design of Porous Volumetric Solar Receiver Using Molten Salt As Heat Transfer Fluid

Heat Transfer Analysis of a Volumetric Solar Receiver by Coupling the Solar Radiation Transport and Internal Heat Transfer

Performance Analysis on a Volumetric Solar Receiver with an Annular Inner Window

Experiment and optimization study on the radial graded porous volumetric solar receiver matching non-uniform solar flux distribution

Pore-scale evaluation on a volumetric solar receiver with different optical property control strategies

Thermo-mechanical performance enhancement of volumetric solar receivers using graded porous absorbers

Optimization Method for the Porous Volumetric Solar Receiver Coupling Genetic Algorithm and Heat Transfer Analysis

Heat transfer analysis of a volumetric solar receiver with composite porous structure

Pore-scale Numerical Simulation of Fully Coupled Heat Transfer Process in Porous Volumetric Solar Receiver