Abstract:Amorphous alloys are meta-stable materials with long-range disordered atomic structure, which have excellent catalytic degradation performance and are also susceptible to crystallization, but the mechanism of the effect of crystallization on their catalytic properties has not been clarified. Therefore, this paper investigates the effect of the annealing crystallization process on the microstructure of Fe-Si-B-Cu-Nb industrial amorphous ribbons and their catalytic degradation properties for acid orange 7. It is found that the catalytic degradation performance of the ribbons after annealing at 460-580 °C decreases dramatically, and its reaction rate constant is less than 0.01 min -1 . The main reason is the formation of ɑ-Fe precipitation phase in the ribbons after annealing at high temperatures and the destruction of the substable amorphous structure. These reduce the rate of hydroxyl radical formation. In contrast, the catalytic degradation performance of the 650-700 °C annealed ribbons increased significantly, which increased to 3.77 times the degradation rate of the as-cast ribbons. The decolorization of the acid orange 7 at 15 min by the annealed ribbons reached 99.22 %, which was 1.12 times higher than that of the as-cast ribbons. The improvement of the catalytic degradation performance was attributed to the primary cell effect between the crystalline phase and the metal compounds and the substitution reaction between the Cu-enriched clusters and zero-valent iron. This study reveals the mechanism of crystallization on the performance of Fe-Si-B-Cu-Nb industrial amorphous ribbons for degrading azo dyes, which provides theoretical and experimental support for the use of aged iron-based amorphous ribbons to cleanse printing and dyeing waste-water to realize the "Using alloy wastes for refreshing waste-water".

Multi-phase nanocrystallization induced fast degradation of methyl orange by annealing Fe-based amorphous ribbons

Research on the regulation mechnism of annealing crystallization on catalytic degradation properties of Fe-based amorphous ribbons

Improving the degradation and magnetization performance of FePC amorphous alloys by annealing treatment

Unexpected High Performance of Fe-Based Nanocrystallized Ribbons for Azo Dye Decomposition

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Improving the Degradation Efficiency for the Azo Dye of Fe82Si2.5B12P2.5C Alloy Via Heat Treatment

Nanocrystallization Kinetics of Amorphous Fe73.5Cu1Nb3−xMoxSi13.5B9 (x=1, 2, 3) Alloys

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Amorphous-nanocrystalline dual-phase structured Fe78Si13B9 alloy ribbons and their efficiency for degradation of direct yellow dye

High Thermal Stability and Oxidation Behavior of FeCrNiAl-based Medium-Entropy Alloys Prepared by Powder Metallurgy

Synthesis of enhanced corrosion resistant Fe-B-C-Ti amorphous ribbons and evaluation of their photodegradation efficiency under light irradiation

Nanostructured metallic glass contributing to efficient catalytic degradation of dye wastewater

Enhanced Dye Degradation Capability and Reusability of Fe-based Amorphous Ribbons by Surface Activation

Excellent dye degradation performance of FeSiBP amorphous alloys by Fenton-like process

Enhanced Degradation Performance of Fe75B12.5Si12.5 Amorphous Alloys on Azo Dye

Crystallization behavior and corrosion resistance of Al86Ni10Zr4 amorphous alloy under different annealing treatment conditions

The Degradation Performance of the Fe78Si13B9 and (feconi)78si13b9 High-Entropy Amorphous Alloy Ribbons

Atomic level simulation of amorphous/nanocrystalline transition behavior in the Fe based amorphous alloys

Unraveling Microstructure Evolution During Isothermal Annealing Treatment in Dual-Phase FeNiCr0.8Al0.8 High Entropy Alloy and Its Effect on Corrosion Behavior

Unraveling Microstructure Evolution During Isothermal Annealing Treatment in Dual-Phase FeNiCr 0.8 Al 0.8 High Entropy Alloy and Its Effect on Corrosion Behavior

Corrosion behaviors of amorphous and nanocrystalline Fe-based alloys in NaCl solution