Abstract:The rapid cleanup of endogenous CO2 has become a necessity in environmental control and life support systems (ECLSSs), to ensure crew safety and long-term task execution. The extensively used non-regenerable LiOH and soda lime adsorbents, although exhibit high CO2 storage capacities and fast kinetics, can hardly fulfill the demands of reduced launch weight and storage volume in the space-and load-limited ECLSSs. New CO2 adsorbents with desirable attributes including high CO2 uptakes, good selectivity, facile regeneration, fast adsorption and desorption kinetics, and good multicycle stability are urgently needed. We developed amine-functionalized adsorbents by loading tetraethylenepentamine (TEPA) on mesoporous supports of activated carbon (AC), aluminum oxide (AO) and silica gel (SG). The adsorbents were characterized by N-2 adsorption-desorption, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscope (SEM) to study their microstructural properties. CO2 adsorption capacities and kinetic performance of the adsorbents with different supports and various amine loadings (10-50 wt%) were evaluated in 2%CO2 at 20 degrees C. The effects of support and amine loading on the structure-performance relationships of the adsorbents were demonstrated. The TEPA-SG-20 adsorbent (20 wt% TEPA loaded on silica gel support) exhibits the highest CO2 adsorption capacity of 1.90 mmol CO2/g and the maximum amine efficiency of 0.48 mmol CO2/mmol N. TEPA-SG-20 also exhibits fast CO2 adsorption kinetics, and the Avrami fractional order kinetic model provides a satisfactory correlation of the experimental CO2 uptakes. Furthermore, the TEPA-SG-20 adsorbent can be efficiently regenerated at 110 degrees C with a great regeneration efficacy of 97%. The desired adsorbent also exhibits good working stability with a low loss-in-capacity of 4.32% in 10 consecutive cycles. The good CO2 adsorption performance of TEPA-SG-20 is associated with the excellent microstructural properties such as high surface area, great pore volume and uniform dispersion of amine species. Overall, the desired TEPA-SG-20 adsorbent shows promise for low concentration CO2 removal in ECLSSs. (c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.

Integrated two-stage adsorption for selective removal of CO2 and SO2 by amine-functionalized SBA-15

Enhanced Tolerance to Flue Gas Contaminants on Carbon Dioxide Capture Using Amine-Functionalized Multiwalled Carbon Nanotubes

Highly Selective Mixed-Matrix Adsorbents Embedded with Anion-Pillared Microporous Materials and Poly(ionic Liquid)s Toward Sulfur Dioxide Capture

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Adsorption separation of CO_2 from flue gas by hyperbranched solid-amine

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

Improvement of Adsorbent Materials for CO 2 Capture by Amine Functionalized Mesoporous Silica with Worm-Hole Framework Structure

Experimental and Kinetics Investigations of Low-Concentration CO2 Adsorption on Several Amine-Functionalized Adsorbents

Adsorption of Carbon Dioxide on Organically Functionalized Sba-16

An Immobilized Amine with Improved Cyclic Performance Prepared from Carboxyl Modified Mesoporous Silica for CO2 Capture

Ultrasonic-assisted Preparation of Organic Amine-Modified SBA-15 for CO2 Capture in Wide Temperature Range: Experimental and Computational Investigation

Functional ionic liquid anchored TS-1 molecular sieve with multiple adsorption sites for efficient capture and separation of CO 2 in flue gas systems

Enhanced SO2 resistance of tetraethylenepentammonium nitrate protic ionic liquid functionalized SBA-15 during CO2 capture from flue gas

Carbon Dioxide Adsorption on Amine-Impregnated Mesoporous SBA-15 Sorbents: Experimental and Kinetics Study

Adsorption of CO2 from Simulated Flue Gas on Pentaethylenehexamine-Loaded Mesoporous Silica Support Adsorbent

Monoethanolamine-Modified Attapulgite-Based Amorphous Silica for the Selective Adsorption of CO<sub>2</sub> from Simulated Biogas

Promoting the CO2 Adsorption in the Amine-Containing SBA-15 by Hydroxyl Group

Facilely tuning the morphologies of tertiary amine-functionalized SBA-15 for optimizing selective SO 2 capture

Highly efficient CO2 adsorption by imidazole and tetraethylenepentamine functional sorbents: Optimization and analysis using response surface methodology

Experimental Investigation of Co2 Capture Capacity: Exploring Mesoporous Silica Sba-15 Material Impregnated with Monoethanolamine and Diethanolamine

Preparation of high-reactivity Ca-based SO<sub>2</sub> adsorbent and experimental study for simulated flue gas dry desulfurization