Abstract:Ordered mesoporous Santa Barbara amorphous (SBA-15) materials have high surface areas and are widely used in adsorption, separation, filtration, and heterogeneous catalytic processes. However, SBA-15 surfaces contain hydroxyl groups that are unsuited to the adsorption of organic pollutants; thus, SBA-15 must be chemically modified to promote its adsorption activity. In this study, amino-functionalized nanoporous SBA-15 was fabricated by employing sodium silicate as a precursor. The structural characteristics of the prepared composites were examined using thermogravimetric analysis, X-ray diffraction, Fourier transform infrared spectrometry, field-emission scanning electron microscopy, transmission electron microscopy, and surface area analysis. The prepared SBA-15 had a large pore size (6.46–7.60 nm), large pore volume (1.037–1.105 cm3/g), and high surface area (546–766 m2/g). Functionalization caused a reduction in the SBA-15 pore volume and surface area, whereas amino groups that promoted an interaction between adsorbates and solids facilitated solute adsorption. The adsorption of tannic acid (TA) onto amino-modified silica composites (SBA-15 and 3-aminopropyltriethoxysilane (SBA-15/APTES) and SBA-15 and pentaethylenehexamine (SBA-15/PEHA)) was studied. Their adsorption capacities were affected by solution temperature, solution pH, agitation speed, adsorbent dosage, and initial TA concentration. The maximum adsorption capacities for SBA-15/APTES and SBA-15/PEHA were 485.18 and 413.33 mg/g, respectively, with SBA-15/APTES exhibiting ultrafast removal of TA (98.61% removal rate at 15 min). In addition, this study explored the thermodynamics, adsorption isotherms, and kinetics. A comparison of two types of amino-functionalized SBA-15 was used for the first time to adsorb TA, which providing valuable information on TA adsorption on high adsorption capacity materials in water media.

Facilely tuning the morphologies of tertiary amine-functionalized SBA-15 for optimizing selective SO 2 capture

Highly Selective Mixed-Matrix Adsorbents Embedded with Anion-Pillared Microporous Materials and Poly(ionic Liquid)s Toward Sulfur Dioxide Capture

Pillared-layer Ultramicroporous Material for Highly Selective SO2 Capture from CO2 Mixtures

Responsive Porous Material for Discrimination and Selective Capture of Low-Concentration SO2

Porosity and hydrophilicity modulated quaternary ammonium-based sorbents for CO<sub>2</sub> capture

Meso-macroporous polymer densely functionalized with tertiary amine groups as effective sorbents for SO2 capture

Highly selective capture of SO 2 with supported micro-mesoporous silica sphere from CO 2 -rich environment

Tuning the Anion for Ultrahigh and Selective Adsorption of Low-Concentration So2 by Functionalized Ionic Porous Organic Polymers

Functionalization of Sba-15 Mesoporous Silica with Thiol or Sulfonic Acid Groups under the Crystallization Conditions

Integrated two-stage adsorption for selective removal of CO2 and SO2 by amine-functionalized SBA-15

Enhanced Tolerance to Flue Gas Contaminants on Carbon Dioxide Capture Using Amine-Functionalized Multiwalled Carbon Nanotubes

Ultra-High SO 2 Capture by Anion-Functionalized Resins through Multiple-Site Adsorption

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

Preparation of Amino-Functionalized Mesoporous SBA-15 Nanoparticles and the Improved Adsorption of Tannic Acid in Wastewater

Modulator-Directed Counterintuitive Catenation Control for Crafting Highly Porous and Robust Metal-Organic Frameworks with Record High SO2 Uptake Capacity.

Enhanced SO2 resistance of tetraethylenepentammonium nitrate protic ionic liquid functionalized SBA-15 during CO2 capture from flue gas

Effect of Amine Structure on CO 2 Capture Performance of Amine-Modified SBA-15

Promoting the CO2 Adsorption in the Amine-Containing SBA-15 by Hydroxyl Group

Efficient selection and reversible adsorption of sulfur dioxide by methylated polyethylenimide supported by porous carbon microspheres

A 3D ultramicroporous porous organic frameworks for SO2 and aromatic sulfides capture with high capacity and selectivity

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics