Abstract:Single chambered air-cathode microbial fuel cells (MFCs) are promising to be scaled up as sustainable wastewater treatment systems. However, the current air-cathode made by brushing noble metal catalyst and Nafion binder onto carbon matrix becomes one of the biggest bottlenecks for the further development of MFCs due to its high cost, huge labor-consuming and less accuracy. A novel structure of air-cathode was constructed here by rolling activated carbon (AC) and polytetrafluoroethylene (PTFE) as catalyst layer to enhance the reproducibility and improve the performance by an optimized three-phase interface (TPI). Air-cathodes with AC/PTFE ratios of 3, 5, 6, 8 and 11 in the catalyst layer were prepared, and the physical and electrochemical techniques were employed to investigate their surface microstructure and electrochemical characteristics. Uniform cross-linked ropiness networks were observed from the catalyst layer of all the cathodes and increased as the AC/PTFE ratio decreased, while the exchange currents were positively related to this ratio. Maximum power densities (MPDs) decreased as follows: AC/PTFE = 6 (802 mW m(-2) at 3.4 A m(-2)), 5 (704 mW m(-2) at 2.2 mA m(-2)), 8 (647 mW m(-2) at 2.2 A m(-2)), 3 (597 mw m(-2) at 2.1 A m(-2)) and 11 (584 mW m(-2) at 2.0 mA m(-2)), which was due to the changes of both the capacitance characteristics and conductivities according to the electrochemical impedance spectrum (EIS) analysis. This study demonstrated that inexpensive, highly reproducible, high performance and scalable air-cathode can be produced by rolling method without using noble metal and expensive binder. (C) 2012 Elsevier Ltd. All rights reserved.

Durability and Regeneration of Activated Carbon Air-Cathodes in Long-Term Operated Microbial Fuel Cells

Long-term performance of activated carbon air cathodes with different diffusion layer porosities in microbial fuel cells

Long‐Term Performance of Chemically and Physically Modified Activated Carbons in Air Cathodes of Microbial Fuel Cells

Regeneration of Activated Carbon Air-Cathodes by Half-Wave Rectified Alternating Fields in Microbial Fuel Cells

Electric Field Induced Salt Precipitation into Activated Carbon Air-Cathode Causes Power Decay in Microbial Fuel Cells.

Temperature-Depended Cu0.92co2.08o4 Modified Activated Carbon Air Cathode Improves Power Output in Microbial Fuel Cell

Effect of Long-Term Operation on Stability and Electrochemical Response under Water Pressure for Activated Carbon Cathodes in Microbial Fuel Cells

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Nitrogenous mesoporous carbon coated with Co/Cu nanoparticles modified activated carbon as air cathode catalyst for microbial fuel cell

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

The Use of Natural Hierarchical Porous Carbon from Artemia Cyst Shells Alleviates Power Decay in Activated Carbon Air-Cathode

Immobilization of a Metal-Nitrogen-Carbon Catalyst on Activated Carbon with Enhanced Cathode Performance in Microbial Fuel Cells.

Activated Carbon-Supported Multi-Doped Graphene As High-Efficient Catalyst to Modify Air Cathode in Microbial Fuel Cells

The Influence and Mechanism of Different Acid Treatment to Activated Carbon Used As Air-Breathing Cathode Catalyst of Microbial Fuel Cell

Carnation-like MnO2 Modified Activated Carbon Air Cathode Improve Power Generation in Microbial Fuel Cells

A Novel Structure of Scalable Air-Cathode Without Nafion and Pt by Rolling Activated Carbon and PTFE As Catalyst Layer in Microbial Fuel Cells.

Metal Organic Framework-Derived Co3O4/NiCo2O4 Double-Shelled Nanocage Modified Activated Carbon Air-Cathode for Improving Power Generation in Microbial Fuel Cell

Enhanced Performance of Activated Carbon–polytetrafluoroethylene Air-Cathode by Avoidance of Sintering on Catalyst Layer in Microbial Fuel Cells

Increased Performance of Microbial Fuel Cells Using Granular Activated Carbon Anodes

Use of Pyrolyzed Iron Ethylenediaminetetraacetic Acid Modified Activated Carbon As Air-Cathode Catalyst in Microbial Fuel Cells.

Bifunctional Quaternary Ammonium Compounds to Inhibit Biofilm Growth and Enhance Performance for Activated Carbon Air-Cathode in Microbial Fuel Cells