Abstract:In this work, a novel internal heat absorption technology using inorganic material rods is employed during the solidification process of steel ingots, aiming to control their solidification and improve the quality of the final product. The study investigates the effect of the insertion depth of inorganic materials on the solidification microstructure and macrosegregation of 2.5-ton 42CrMo ingots. The mechanical properties of samples from the product are also tested. A numerical simulation model for casting 2.5-ton ingots is established and implemented in Ansys Fluent fluid simulation software, with inorganic material rods set at different preset depths. The simulation explores the physical processes of the melting and floating of inorganic materials in molten steel, as well as their effects on the temperature and flow fields of the material. The results show that deeper insertion of inorganic materials (200 mm from the hot top) reduces the tendency for macrosegregation compared to that at the insertion depth of 100 mm. Specifically, the positive segregation area decreases by 10.35%, while the negative segregation area decreases by 15.32%. Moreover, deeper insertion results in a significant refinement of the solidification microstructure, ultimately enhancing the mechanical properties of the products machined from the ingots (i.e., the yield strength increased by 4.7%). The numerical simulation results indicate that as the placement depth of inorganic materials in the ingot mold increases, the cooling effect becomes more significant, the flow area of molten steel initiated by the inorganic materials expands, and the linear velocity of the double-circle flow increases. This further explains why the solidification quality of the ingots improves with the increasing placement depth of inorganic materials.

Effect of Directional Solidification of Electroslag Remelting on the Microstructure and Primary Carbides in an Austenitic Hot-Work Die Steel

Morphology Refinement of Eutectic Carbides Assisted by Static Magnetic Field during Laboratory Electroslag Remelting Process

Microstructure Selection of Fe–Cr–Ni Alloy During Directional Solidification

A Novel Directional Solidification Of Tial-Based Alloys By Electromagnetic Cold Crucible Zone Melting Technology With Y2o3 Moulds

Formation and evolution of primary carbides in high-carbon martensitic stainless steel

Effect of electrical parameters and slag system on macrostructure of electroslag ingot

Microstructural Investigations of Ni-Based Superalloys by Directional Solidification Quenching Technique

Cleanliness improvement and microstructure refinement of H13 die steel by laboratory magnetic-controlled electroslag remelting

Investigations of Solidification Structures of High Carbon Alloy Cast Steel Containing RE-V-Ti

Effect of Solidification Segregation on Microstructure and Mechanical Properties of a Ni-Cr-Mo-V Steel Weld Metal

Influence of laser surface re-melting on microstructure of steel-bonded carbide DGJW40 alloy prepared by electro-slag melting and casting

Microstructural Stability and Softening Resistance of a Novel Hot-Work Die Steel

The Structural Evolution And Segregation In A Dual Alloy Ingot Processed By Electroslag Remelting

Effect of Electroslag Remelting on the Microstructure and Ballistic Penetration Characteristics of an Austenite‐Based Lightweight Steel

Investigation of Primary Carbides in a Commercial-Sized Electroslag Remelting Ingot of H13 Steel

Evolution of primary carbides during accelerated solidification process of high-carbon martensitic stainless steels

Study of the Formation and Intergrowth of Granular Eutectic in Austenitic Steel Matrix Composite by Directional Solidification Technology

The Influence of Insertion Depth of Inorganic Materials on Solidification Microstructure and Segregation of 2.5-ton 42CrMo Ingot

Influence of magnesium treatment on inclusions and primary carbides in As-cast H13 die steel

Optimizing the Morphology of Primary Carbides and Mechanical Properties during Processing Of Cast-Steel (Din Gx210crv12 1) Press-Forming Dies

Segregation and carbide evolution in AISI D2 tool steel produced by curved continuous casting