Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Microstructure Selection of Fe–Cr–Ni Alloy During Directional Solidification

Formation of a Two-Phase Microstructure in Fe–Cr–Ni Alloy During Directional Solidification

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Microstructure Formation in Rapidly Solidified AISI 304 Stainless Steel Strip

Microstructure evolution in AISI 304 stainless steel during near rapid directional solidification

Formation of a blocky ferrite in Fe–Cr–Ni alloy during directional solidification

Study Progress in Phase-field Simulation of Directional Solidification Microstructure

Phase-Field Modeling of Solute Trapping in Single-Phase Alloys During Directional Solidification

Effect of Cooling Rate on Solidification Microstructures in AISI 304 Stainless Steel

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Formation of Two-Phase Coupled Microstructure in Aisi 304 Stainless Steel During Directional Solidification

Characterization of the Microstructure Evolution and Microsegregation in A Ni-Based Superalloy under Super-High Thermal Gradient Directional Solidification

Microstructure Evolution of Directionally Solidified Ti–46Al–0.5W–0.5Si Alloy

Numerical Simulation of Microstructure Evolution During Directional Solidification of Ti-45at. % Al Alloy

Formation Mechanism and Structure Evolution of Austenitic Stainless Steel 304 during Solidification with Near-Rapid Rates

Microstructure evolution and solidification behaviour of Nb–16Si–22Ti–2Cr–2Al–6Hf alloy processed by directional solidification

Microstructure selection during the directionally peritectic solidification of Ti–Al binary system

Microstructural Control and Mechanical Properties of Ti–47Al–2Cr–2Nb Alloy by Directional Solidification Electromagnetic Cold Crucible Technique

Influences of Cooling Rates on Solidification and Segregation Characteristics of Fe-Cr-Ni-Mo-N Super Austenitic Stainless Steel

Microstructure Transition of Γ-Tial Alloys with Abrupt Cross-Sections in Yttria Ceramic Moulds During Directional Solidification by Electromagnetic Cold Crucible