Abstract:Mesoporous TiO2-Al2O3 composites with different Ti/Al molar ratios were successfully synthesized via pre-hydrolysis co-precipitation method and the corresponding NiW supported hydrotreating (HDT) catalysts were prepared via incipient wetness co-impregnation method. The effects of Ti modification on the physicochemical properties of the prepared supports and catalysts were determined by the characterization techniques such as XRD, FTIR, N2 physical adsorption–desorption, SEM-EDS, ICP-OES, NH3-TPD, H2-TPR, HRTEM and XPS. Finally, quinoline, indole and coker gas oil (CGO) were used respectively as probes to investigate the Ti modification on the hydrodenitrogenation (HDN) performances of the corresponding catalysts. The results show that the TiO2-Al2O3 samples synthesized by the pre-hydrolysis co-precipitation method achieved the level of molecular composition, and the crystalline structures, pore properties and acidity properties of the TiO2-Al2O3 supports varied with the Ti/Al molar ratios. Ti modification can modulate the interaction between the active metals and the supports (MSI), and promote the formation of more so-called “type II” NiWS active phases. Furthermore, the existence of Ti3+ species in catalysts NiW/TA1 and NiW/TA2 enhanced the sulfidation degrees of active metals and weakened the bond energy between the active metals and sulfur atoms and further promoted the formation of more coordinatively unsaturated sites (CUS). The catalytic assessment results show that the HDN activities of the catalysts were effectively improved after Ti modification and the improvement was largely due to the promotion of the cleavage of the C(sp3)-N bond of basic nitrides and the C(sp2)-N bond of non-basic nitrides. The NiW/TA1 catalyst exhibited the highest performance in the HDT process of heavy oil, with a 15.8% and 12.4% improvement in HDN rate and hydrodesulfurization (HDS) rate compared with the unmodified catalyst, respectively, which was mainly attributed to its suitable pore properties, moderate MSI, large number of CUS, moderate stacking and highest active metal sulfidation degree of the active phase.

Dehydration of Castor Oil over NaHSO4/MCM-41 Catalyst Modified by n-Dodecyltriethoxysilane

Dehydration of Castor Oil over a NaHSO4/MCM-41 Catalyst Prepared by Supercritical Impregnation

Sol-Gel Preparation, Characterization and Hydrogenation Property of Silica Supported Ni Catalyst

The Effect of Hydrophobically Modified Iron Catalysts with Hexadecyltrimethoxysilane on Fischer‐Tropsch Synthesis

Dehydration of Castor Oil over H6P2W18O62@MCM-41

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

Preparation of PtCl62-Intercalated Mg/Al-hydrotalcite Catalyst and Its Catalytic Activities for the Hydrosilylation of Olefins

Highly Dispersed CrOx Nanoparticle-Modified NaZSM-5 for Dehydration of Methanol to Dimethyl Ether

Highly Dispersed Crox Nanoparticles Modified Nazsm-5 for Lower Temperature Dehydration of Methanol to Dimethyl Ether

Gas Phase Dehydration of Glycerol to Acrolein Over NaHSO4@Zr-MCM-41 Catalyst

Hydroisomerization of Model FCC Naphtha over Sulfided Co(Ni)–Mo(W)/MCM-41 Catalysts

Molybdenum anchored on NH2-modified spherical SiO2: A highly efficient and stable catalyst for oxidative desulfurization of fuel oil: Oxidative desulfurization using Mo-NH2-SiO2

Molybdenum Anchored On Nh2-Modified Spherical Sio2: A Highly Efficient And Stable Catalyst For Oxidative Desulfurization Of Fuel Oil

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

Catalytic Hydrothermal Liquefaction of D. Tertiolecta over Multifunctional Mesoporous Silica-Based Catalysts with High Stability

Oil Removal of Spent Hydrotreating Catalyst Como/Al2o3 Via A Facile Method with Enhanced Metal Recovery

Hydrodeoxygenation of bio-oil model compounds over Ni- and Pt-catalysts supported on hydrophobized halloysite nanotubes

Synthesis of mesoporous TiO2-Al2O3 composites supported NiW hydrotreating catalysts and their superior catalytic performance for heavy oil hydrodenitrogenation

Synthesizing a transesterification catalyst via a condensation reaction and assessment of the mechanism using density functional theory

Synthesis of Nanoporous Flower-like Y-SAPO-11 Composite Molecular Sieves for Hydrocracking of n -Hexadecane

Efficient hydrothermal deoxygenation of methyl palmitate to diesel-like hydrocarbons on carbon encapsulated Ni−Sn intermetallic compounds with methanol as hydrogen donor