Abstract:Porous metals have generated increasing interest for biomedical, catalysis, energy and environmental applications, because of the high specific strength and large surface area. To make full use of the porous feature, it is of essential importance to tailor the surface morphology and wettability of the microchannels inside the metals. However, it remains a great challenge to uniformly and conformally coat the microchannels of <30 mu m in view of the spatial limitation. In this work, a percolative anodization is developed to decorate the ultrafine microchannels of porous titanium with TiO2 nanotube arrays. Uniform and conformal nanotube coatings are produced throughout the channels of 0.5-10 mu m with superwetting characters by optimizing the solvent viscosity. The mechanism of percolative anodization is established by investigating the nanotube growth in both torturous and straight channels. A key parameter of K value is thus introduced to elucidate the percolative anodization controlled either by electric field or concentration field. The anodization requires an electrolyte solution of low viscosity with K < 0.4, and may employ that of high viscosity with K > 0.4 to sufficiently coat the microchannels. The major findings reported herein can be extended to other porous metals for surface modification and functionalization. (C) 2022 The Electrochemical Society ("ECS"). Published on behalf of ECS by IOP Publishing Limited.

Coaxial Anodic Oxidation under Dynamic Electrolyte Conditions for Inner Surface Patterning of High-Aspect-Ratio and Slim Ti Tubes

Conformally Anodizing Hierarchical Structure in a Deformed Tube Towards Energy-Saving Liquid Transportation

Fabrication of Well-Aligned Tio2 Nanotube Arrays with Outstanding Light-Induced Hydrophilicity Performance

Large-Scale, Uniform, and Superhydrophobic Titania Nanotubes at the Inner Surface of 1000 Mm Long Titanium Tubes

Percolative Anodization: Tailoring TiO2 Nanotube Arrays Inside Ultrafine Ti Microchannels

Anodization of Highly Ordered Tio2 Nanotube Arrays Using Orthogonal Design and Its Wettability

TiO2 Nanotube Arrays Inside Ultrafine Ti Tubes with an Aspect Ratio of 2500 for Sensing Needles: The Bubble Effect in a Confined Space

High Ratio-Aspect Titania Nanotube Array Prepared by Anodic Oxidation Method

A Two-Step Anodization to Grow High-Aspect-Ratio Tio2 Nanotubes

Double-sided anodic titania nanotube arrays: a lopsided growth process.

Titanium oxide nanotube arrays prepared by anodic oxidation

Fabrication of TiO2 Nanotube Arrays by a Two-Step Anodic Oxidation

In-situ preparation of multi-layer TiO2 nanotube array thin films by anodic oxidation method

Preparation and Characterization of TiO<SUB>2</SUB> Nanotube Arrays by Anodic Oxidation Method: Preparation and Characterization of TiO<SUB>2</SUB> Nanotube Arrays by Anodic Oxidation Method

Synthesis of TiO<sub>2</sub> Nanotube Arrays Through Multistep Anodization

Fabrication of Titanium Oxide Nanotube Arrays by Anodic Oxidation

Preparation of Near Micrometer-Sized TiO2 Nanotube Arrays by High Voltage Anodization

High-Speed Growth of Tio2 Nanotube Arrays with Gradient Pore Diameter and Ultrathin Tube Wall under High-Field Anodization

Tailoring the Surface Morphology of TiO2 Nanotube Arrays Connected with Nanowires by Anodization

Synthesis And Photovoltaic Application Of High Aspect-Ratio Tio2 Nanotube Arrays By Anodization

Preparation and Doping of Anodic Tio2 Nanotube Array