Abstract:This study presents the piezoelectric microspeaker design consisted of the central-diaphragm, connecting-spring, and cantilever-plate actuators to create two resonances in the desired frequency range. In addition to the cantilever-plate actuator, the electrical routing and piezoelectric film are designed to drive the central-diaphragm independently. According to the stress distributions on the microspeaker structure for both lower and higher modes, the all-pass filter circuit is designed and implemented to manage the phase of input signals to the central-diaphragm, thereby changing the motion of the proposed design. Thus, the sound pressure level (SPL) beyond 1 kHz is improved and the SPL zero at specific frequency range is avoided. As a result, the bandwidth enhancement is achieved by the proposed microspeaker. Measurements are conducted under 0.707 V rms with 9 V DC driving voltage in standard ear simulator to evaluate the performances of the proposed design. A reference design without a piezoelectric film on the central-diaphragm is also implemented for comparison. Measurements indicate, in the low frequency range (before 4 kHz), the proposed designs have over 3 dB SPL enhancement due to the excitation of central-diaphragm. Moreover, compared to the reference design, proposed designs prevent the occurrence of an SPL zero near 10 kHz (between lower and higher modes) and achieve over 15 dB SPL enhancement. When the driving frequency exceeds the higher mode (14 kHz), the proposed design with the all-pass filter eliminates the SPL zero (at 16.8 kHz) with nearly 8 dB enhancement in the 15–18 kHz frequency range. Thus, this study demonstrates the bandwidth enhancement by the proposed microspeaker design with central-diaphragm actuation and all-pass filter integration.

A Large-Diaphragm Piezoelectric Panel Loudspeaker and Its Acoustic Frequency Response Simulation Method

Theoretical and Experimental Study on Panel Piezoelectric Loudspeaker

Sound Field Excited by Panel Loudspeaker Simulation and Analysis of Rectangular Small Enclosure with FEM

Modeling and Analysis for Sound Field of Rectangular Small Enclosure under the Excitation of Panel Loudspeaker by Using FEM

Optimization methods for acoustic performance of piezoelectric panel loudspeaker.

Adaptive Lagrange Finite Element Methods for High Precision Vibrations and Piezoelectric Acoustic Wave Computations in SMT Structures and Plates with Nano Interfaces

A reduced-order-model-based equivalent circuit for piezoelectric micro-electro-mechanical-system loudspeakers modeling

Finite Difference Based Vibration Simulation Analysis of a Segmented Distributed Piezoelectric Structronic Plate System

Vibration and acoustic radiation control of a panel with piezoelectric oscillators.

Electromagnetic analysis of thin film bulk acoustic resonator

Finite Difference Based Electrical Modeling and Vibration Control Simulation of Piezoelectric Structronic Plate System

On the design of piezoelectric mems microspeaker with high fidelity and wide bandwidth

Analysis of Longitudinal and Torsional Resonance Vibrations of a Piezoelectrically Excited Bar by Introducing Piezoelectric Loss Coefficients

Flexural behaviors and free vibration responses of hybrid plates coupled with piezoelectric laminae

On the Design of Piezoelectric MEMS Microspeaker for the Sound Pressure Level Enhancement

Finite Element Analysis on Acoustic and Mechanical Performance of Flexible Perforated Honeycomb-Corrugation Hybrid Sandwich Panel

Piezoelectric microspeaker using novel driving approach and electrode design for frequency range improvement

Electroacoustic Analysis of an Electret Loudspeaker Using Combined Finite-Element and Lumped-Parameter Models.

Bandwidth enhancement of piezoelectric MEMS microspeaker via central diaphragm actuation and filter integration

Finite Element Analyses on Large Displacement Piezoelectric Actuator

High-Frequency Vibration Analysis of Piezoelectric Array Sensor under Lateral-Field-Excitation Based on Crystals with 3 M Point Group.