Abstract:In recent years a considerable amount of research has been undertaken in the development of the piezoelectric actuator for active structural acoustic control (ASAC). Some researchers have concentrated on the optimisation of the parameters of the piezoelectric actuators; for instance, the number, sizes, locations and voltages applied to the actuators to minimise either structural vibration or radiated sound power . In the work of Wang et al. , a mathematical formulation for the optimisation of the locations of piezoelectric actuators in a feedforward control implementation of ASAC was given. They demonstrated that optimally located piezoelectric actuators can provide a large reduction in the amount of sound power radiated, and are observed to perform better than actuators in arbitrarily chosen locations. Based on the object function selected in their work, Wang et al. found that properly locating one piezoelectric actuator generally gives greater reduction of radiated sound power than using two or three actuators. Recently, Varadan et al. 4 have reported on the optimisation of the placement of circular disk-shape piezoelectric actuators on a clamped rectangular plate, using the finite element method. They found that the optimal locations of piezoelectric actuators to minimise sound radiation are near the corners rather than the centre of the plate. This is because the edges and corners of flat plates contribute most to the radiated sound power at frequencies below the plate critical frequency, the frequency range of the results reported. Another application of PZT actuators their use to excite a panel control sources to replace loudspeakers in ANVC (Li et al. ). In the work of Li et al. , a tuned curved panel sound source for use with active systems for controlling transformer sound was developed. If this kind of sound source is used in the place of loudspeakers, the number of control sources and the complexity of the controller can be reduced substantially. To prevent the interaction and cancellation of the sound radiation from the two sides of the panel, a cavity was coupled to one side of the panel. The reasons for using a curved panel rather than flat panel are twofold: first a curved panel is more easily excited by piezoelectric patch actuators because the bending vibration of the curved panel couples better with the extensional motion of the actuators; and second, it is not possible to adjust the resonance frequencies of the efficient modes of a flat panel very easily. In this paper, a curved panel with a backing cavity driven by rectangular PZT actuators 7 has been modelled. Simple optimisation procedures for sizes and locations of the PZT actuators on the panel are given. Because the research described in this paper concerns the design of a resonant curved panel as a sound source, only optimal results for some efficient natural modes are presented. The objective of the optimisation is to maximise the structural response (velocity) of the curved panel vibrating in particular resonant modes.

Optimization methods for acoustic performance of piezoelectric panel loudspeaker.

Theoretical and Experimental Study on Panel Piezoelectric Loudspeaker

Optimal Implementation of Miniature Piezoelectric Panel Speakers Using the Taguchi Method and Genetic Algorithm

Optimal Sizes and Locations of Piezoelectric Actuators for Curved Panel Sound Sources

On the Design of Piezoelectric MEMS Microspeaker for the Sound Pressure Level Enhancement

A Large-Diaphragm Piezoelectric Panel Loudspeaker and Its Acoustic Frequency Response Simulation Method

Bandwidth enhancement of piezoelectric MEMS microspeaker via central diaphragm actuation and filter integration

Optimal Design of Resonant Piezoelectric Buzzer from a Perspective of Vibration-Absorber Theory.

Optimization of Sensing and Feedback Control for Vibration/Flutter of Rotating Disk by PZT Actuators Via Air Coupled Pressure

On the design of piezoelectric mems microspeaker with high fidelity and wide bandwidth

Flexible Piezoelectric Nanocolumnar Composite Films as Flat-Panel Loudspeakers: Application and Modeling

Investigation on the Reproduction Performance Versus Acoustic Contrast Control in Sound Field Synthesis

Novel inverse multi-objective optimization-empowered design of microperforated panels for enhanced low-frequency noise mitigation

Piezoelectric microspeaker using novel driving approach and electrode design for frequency range improvement

Recent Development and Perspectives of Optimization Design Methods for Piezoelectric Ultrasonic Transducers

Concurrent optimization of actuator/sensor layout and control parameter on piezoelectric curved shells with active vibration control for minimizing transient noise

Bandwidth Enhancement of Piezoelectric Mems Microspeaker by Multiple Piston-Modes and Novel Crossover Driving Method

Optimal Control Of Piezoelectric Laminated Parabolic Cylindrical Panels

THD Improvement of Piezoelectric MEMS Speakers by Dual Cantilever Units with Well-Designed Resonant Frequencies

On the design of a two-way piezoelectric MEMS microspeaker based on a multi-shape cantilever array for high-frequency applications

Capillary effect-based selective sealing strategy for increasing piezoelectric MEMS speaker performance