Abstract:One-dimensional silicon carbide (1D SiC) nanostructure has shown unusual properties such as extremely high strength, good flexibility, fracture toughness, wide band gap (~3.2eV), large breakdown electric field strength (>2 MV cm-1, 10 times that of silicon), and inverse Hall-Petch effect. Because of these advantages, 1D SiC nanomaterial has gained extensive attention on the wide range of applications in microelectronics, optoelectronics, nanocomposites, and catalyst supports. Many methods have been used for the synthesis of 1D SiC nanostructures such as chemical vapor deposition, carbon nanotube-confined reaction, laser ablation, high-frequency induction heating, and arc discharge. However, these methods have also some shortcomings such as using catalyst, high-cost, low yield, irregular geometry and impurity. In this work, electrospinning was used to prepare aligned PVA/SiO2 composite nanofibers and the effect of fiber alignment on the production efficiency and quality of 1D SiC nanostructure was investigated. For this purpose, aligned electrospun nanofibers, as the desirable precursor, were put in a tube furnace and heated up to 1250°C under a controlled program in an inert atmosphere. Finally, the grown 1D SiC nanostructure product was characterized using SEM, XRD, and FTIR. The results confirmed the successful synthesis of pure crystalline1D β-SiC nanostructure with high yield, more regular, and metal catalyst-free.

Combined Synthesis of Aligned Sic Nanofibers Via Electrospinning and Carbothermal Reduction

The effect of electrospun nanofibers alignment on the synthesis of one-dimensional silicon carbide nanostructure

Synthesis and Photoluminescence of Needle-Shaped 3c–sic Nanowires on the Substrate of PAN Carbon Fiber

Realizing Single-Crystalline Vertically-Oriented and High-Density Electrospun Nanofibril Bundles by Controlled Postcalcination

Tailoring of Porous Structure in Macro-Meso-Microporous SiC Ultrathin Fibers via Electrospinning Combined with Polymer-Derived Ceramics Route

Fabrication of SiC ultrafine fiber with low oxygen content by electrospinning, thermal curing and pyrolysis of cyano-polycarbosilane

Electrospinning 3 C -SiC mesoporous fibers with high purities and well-controlled structures

Synthesis of Crystalline Sic Nanofiber Through the Pyrolysis of Polycarbomethylsilane Coated Platelet Carbon Nanofiber

Processing Continuous Submicro/Nano SiC Fibers by Electrospinning

Synthesis of Aligned Carbon Nanotube Composite Fibers with High Performances by Electrochemical Deposition

Nanochannel Diffusion-Controlled Nitridation of Polycarbosilanes for Diversified SiCN Fibers with Interfacial Gradient-SiCxNy Phase and Enhanced High-Temperature Stability

Fabrication of Aligned Side-by-Side TiO2/SnO2Nanofibers Via Dual-Opposite-Spinneret Electrospinning

In Situ Growth of Core-Sheath Heterostructural SiC Nanowire Arrays on Carbon Fibers and Enhanced Electromagnetic Wave Absorption Performance.

In Situ Growth of SiC Nanofibers on PAN Carbon Fibers in Vapor of Silicon

Synthesis of SiC@SiO2 Nanocables Via a Catalyst-Free Carbothermal Reduction Method

Significant Improvement of Mechanical Properties Observed in Highly Aligned Carbon-Nanotube-Reinforced Nanofibers

Shape And Doping Enhanced Field Emission Properties Of Quasialigned 3c-Sic Nanowires

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

A synergistic strategy for SiC/C nanofibers@MXene with core-sheath microstructure toward efficient electromagnetic wave absorption and photothermal conversion

Field emission behavior of aligned carbon nanofiber arrays

Dip-Coating Self-Assembly Fabrication and Polarization Sensitive Photoresponse of Aligned Single-Walled Carbon Nanotube Film