Abstract:Torque ripple reduction by harmonic current injection for permanent magnet synchronous machine (PMSM) drives has been widely investigated. The existing research can be briefly divided into feedforward-based methods and feedback-based methods. Feedforward-based methods require torque ripple model and machine parameters, so that the performance of those methods is limited due to the accuracy of the model itself and machine parameters. Feedback-based-methods are presented to improve the performance of torque ripple reduction, which are mostly based on speed harmonics caused by the corresponding torque ripples, while the speed operation range of feedback-based-methods is limited due to the fact that speed harmonics will be filtered by the inertia of the drive systems at high speeds. Therefore, it is required to propose one torque ripple reduction method without machine parameters, which also avoids the limitation of the speed operation. In this paper, a novel feedback-based torque ripple reduction method for PMSM drives is proposed, wherein quadrature magnitudes of tangential vibration acceleration of the stator are measured and regulated by the model-free adaptive controller (MFAC) for torque ripple reduction, since the tangential force that generates torque ripples will also act on the stator and generate tangential vibration. The proposed controller can generate optimal harmonic current references without speed limitations and any machine parameters. The proposed method is evaluated by experiments and is verified to reduce torque ripples of PMSM drives effectively.

Torque Ripple Elimination Based on Inverter Voltage Drop Compensation for a Three-Phase Four-Switch Inverter-Fed PMSM Drive under Low Speeds

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Comprehensive Analysis and Reduction of Torque Ripples in Three-Phase Four-Switch Inverter-Fed PMSM Drives Using Space Vector Pulse-Width Modulation

Torque ripple minimization for switched reluctance motors by online modification of torque sharing function

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Hybrid Space Vector Modulation Strategy for Torque Ripple Minimization in Three-Phase Four-Switch Inverter-Fed PMSM Drives

A Novel Boost Chopper Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Periodic Speed Ripple Suppression Based on Cascade Filter of IPMSM Drive in Air-Conditioners

Torque ripple analysis and reduction of permanent magnet synchronous motor

Torque Ripple Reduction for a Four-switch Inverter Fed PMSM DTC System

A Combined Finite Element-Domain Elimination Method for Minimizing Torque Ripples in Inverter-Fed AC Motor Drive Systems

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

Torque Ripple Minimization of the Permanent Magnet Synchronous Machine by Modulation of the Phase Currents

Synchronous Optimal Torque PWM with Low Torque Ripple under Low Carrier Ratio

Harmonic Current Optimization for Torque Ripple Reduction in Permanent Magnet Synchronous Machine Drives Based on Torque Ripple Surrogate Model

Analysis and Reduction of Stator Copper Losses in Three-phase Four-switching Inverter-fed SPMSM Drives Using Space Vector Pulse-width Modulation

Selective Torque Harmonic Elimination for Dual Three-Phase PMSMs Based on PWM Carrier Phase Shift

Torque Ripple Reduction of Permanent Magnet Synchronous Machine Drives with Tangential Vibration Acceleration Control