Abstract:One of the parameters required for a high-performance drive of a surface-mounted permanent magnet synchronous motor (SPMSM) operating in the flux-weakening region is the torque ripple reduction. In general, the torque ripple results from many reasons, such as the machine structure, oscillations of measured speed, etc. Hence, this article proposes an optimized strategy that works in conjunction with a variable switching frequency pulsewidth modulation algorithm to reduce the torque ripple peak. For the modulating algorithm, the updated frequency changes linearly with the desired torque ripple and its predicted maximum peak. For the proposed strategy, the reflection of proportional-integral (PI) parameters is observed at the torque ripple caused by the current ripples. Therefore, a robust method for adjusting PI parameters is proposed that relies on the improved fitness function that can minimize the regulators' error and maximize the drive stability bandwidth in the flux-weakening region. This objective function is optimized offline using a genetic algorithm optimization technique. Meanwhile, a third-order generalized integral flux observer is applied in this article, providing evidence of torque ripple reduction. For driving in the flux-weakening region, the reference magnitude of the duty cycles can produce the required d-axis reference current to prevent the saturation of current controllers. Finally, comprehensive simulations and experiments are presented to validate the proposed strategy effectively. In comparison with the conventional method, the proposed strategy can reduce the copper and switching losses simultaneously and control the current and speed in the flux-weakening region efficiently.

A Combined Finite Element-Domain Elimination Method for Minimizing Torque Ripples in Inverter-Fed AC Motor Drive Systems

Torque ripple minimization for switched reluctance motors by online modification of torque sharing function

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Transient analysis of PWM inverter-fed AC motor drives using finite element method coupling with external circuit model

Reduction of Commutation Torque Ripple in Brushless DC Motors

Periodic Speed Ripple Suppression Based on Cascade Filter of IPMSM Drive in Air-Conditioners

A Novel Sequential Direct Torque Control Scheme for Seven-phase Induction Motors

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Torque Ripple Elimination Based on Inverter Voltage Drop Compensation for a Three-Phase Four-Switch Inverter-Fed PMSM Drive under Low Speeds

Torque ripple analysis and reduction of permanent magnet synchronous motor

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Torque Ripple Minimization of the Permanent Magnet Synchronous Machine by Modulation of the Phase Currents

Comprehensive Analysis and Reduction of Torque Ripples in Three-Phase Four-Switch Inverter-Fed PMSM Drives Using Space Vector Pulse-Width Modulation

A novel harmonic elimination approach in three-phase multi-motor drives

Analysis and Optimization of Torque Ripple Reduction Strategy of Surface-Mounted Permanent-Magnet Motors in Flux-Weakening Region Based on Genetic Algorithm

A Strategy of Torque Ripple Minimization for BLDC Motors with Nonideal Back EMF

A New Method of Torque Ripple Minimization for Brushless DC Motors

A New Torque Control Method for Torque Ripple Minimization of BLDC Motors with Un-Ideal Back EMF

Research on Finite Element Analysis and Torque Ripple Suppression of the Switched Reluctance Motor

Improved Direct Torque Control of Induction Motor for Torque Ripple Minimization