Abstract:Based on the in situ diagnostic system and the digital image post-processing technique, quantifications of the anodic erosion components and heat transfer efficiency for tungsten and the W80Ag20 material in arcs of argon, helium, and nitrogen were achieved. The leading vaporization of silver has been found to result in evidently lower anodic heat transfer efficiency and much smaller molten pools compared with those of the tungsten anode, but the intensive generation of silver vapor under the melt layer causes higher splashing erosion of the W80Ag20 anode. However, these characteristics can be strongly changed by the cathodic blowing, which leads to a much higher splashing erosion of tungsten anode but a lower erosion rate of W80Ag20 anode. Through the visualization of the erosion behavior and the post microanalysis of the anode surface, the possible driving mechanisms for the generation of the splashing droplet were discussed. The result indicates that the local high pressure caused by the vapor blasting during the bubble explosion plays a key role in the detachment of splashing droplets. Furthermore, as for the tungsten-based anode, the comparison of erosion behavior between the W80Ag20 anode and the previous-studied W70Cu30 anode makes it clear that increasing the temperature difference between the melting point (MP) of tungsten and the boiling point (BP) of the other material has the pros and cons. It is effective for the decrease of the anode erosion when the anode heat energy is relatively weak, while it can promote the splashing erosion when the liquid tungsten layer has been formed on the anode tip. These results are beneficial for the optimal design of the electrode system in circuit breakers.

Influence of Breakdown Voltages on Arc Erosion of A Ti3alc2 Cathode in an Air Atmosphere

Erosion behavior of Ti3AlC2 cathode under atmosphere air arc

High-voltage Arc Erosion Behavior and Mechanism of Ti3AlC2 under Different Ambient Atmospheres

Arc Corrosion Behavior of Cu-Ti3AlC2 Composites in Air Atmosphere

Arc ablation properties of Ti3SiC2 material

Effects of Different Atmospheres on the Arc Erosion Behaviors of Ti3SiC2 Cathodes

Arc Erosion Characteristics Evolution of Ag/Ti3SiC2 Composites During Repetitive Arc Breakdowns in SF6 Gaseous Medium

Cathode Erosion of Graphite and Cu/C Materials in Airarcs

Influence of Ti3SiC2 content on erosion behavior of Cu–Ti3SiC2 cathode under vacuum arc

Influence of Ti 2 SnC content on arc erosion resistance in Ag–Ti 2 SnC composites

High Temperature Erosion Properties of Arc-Sprayed Coatings Using Various Cored Wires Containing Ti–Al Intermetallics

Effect of Nitrogen Protective Atmosphere on Microstructure and High Temperature Erosion Property of TiAl3 and Cr3C2 Composite Coatings

Effect of Contact Materials on the Transient Characteristics of Vacuum Arc Plasma and Anode Erosion

Comparison of Electrical Ablation Properties Between Pantograph Materials: Ti<sub>3</sub>AlC<sub>2</sub> and Cu-Ti<sub>3</sub>AlC<sub>2</sub>

Arc Erosion Behavior and Mechanism of Cu/Ti3SiC2 Composites in C-C4f8/co2 and C-C4f8/n2 Mixtures

Arc Erosion Properties of Cu-La2Sn2O7 Composite under Different DC Voltage

Anisotropic Arc Erosion Resistance of Ag/Ti3AlC2 Composites Induced by the Alignment of Ti3AlC2

Chromium, a Promising Cathode Candidate for Homogeneous Arc Erosion in Air

Evolution of Anodic Erosion Components and Heat Transfer Efficiency for W and W80Ag20 in Atmospheric-Pressure Arcs

Corrosion behavior and mechanism of Cu/Ti3AlC2 composites under arc discharge in different atmospheres

Erosion behaviour of composite Al-Cr cathodes in cathodic arc plasmas in inert and reactive atmospheres