Abstract:Summary form only given. Vacuum cathodic arc plasmas have attracted much attention as a surface modification tool. For instance, metallic plasma ion implantation - deposition has demonstrated good effectiveness and versatility in the fabrication of sticking ceramic films in a plasma immersion configuration. Due to the pulsed working mode, the vacuum arc extinguishes frequently and periodically. This results in some consistent burning characteristics on the cathode rod after a burning period but some other features can also appear due to unstable burning of the vacuum arc and low efficiency of the cathode materials. The end configuration of the cathode rod is influenced by the pulse duration, arc current, gas pressure, etc. In a short pulse (e.g., pure metallic implantation), the cathode spot has insufficient time to spread to the entire surface before the arc extinguishes. Consequently the outer section of the cathode surface is preferentially eroded. A longer pulse duration can effectively avoid this local burning, for example, changing the arc duration from 0.4 ms to 2.0 ms. A 2.0 ins pulse arc results in a cathode surface without the protruding feature in the center and sometime even with a concave feature. Using typical operating conditions with a short pulse arc, a hollow cathode is experimentally proved to be very effective in avoiding the protruded features in the center as well as to stabilize the arc burning process. In this paper the influence of burning conditions on the eroded shape of the cathode end in the pulsed cathodic arc mode is presented.

Effects of Different Atmospheres on the Arc Erosion Behaviors of Ti3SiC2 Cathodes

High-voltage Arc Erosion Behavior and Mechanism of Ti3AlC2 under Different Ambient Atmospheres

Erosion behavior of Ti3AlC2 cathode under atmosphere air arc

Effect of Nitrogen Protective Atmosphere on Microstructure and High Temperature Erosion Property of TiAl3 and Cr3C2 Composite Coatings

Arc Erosion Behavior and Mechanism of Cu/Ti3SiC2 Composites in C-C4f8/co2 and C-C4f8/n2 Mixtures

Influence of Breakdown Voltages on Arc Erosion of A Ti3alc2 Cathode in an Air Atmosphere

Influence of Ti3SiC2 content on erosion behavior of Cu–Ti3SiC2 cathode under vacuum arc

Arc Corrosion Behavior of Cu-Ti3AlC2 Composites in Air Atmosphere

Cathode Erosion of Graphite and Cu/C Materials in Airarcs

Arc Erosion Characteristics Evolution of Ag/Ti3SiC2 Composites During Repetitive Arc Breakdowns in SF6 Gaseous Medium

Influence of Ti 2 SnC content on arc erosion resistance in Ag–Ti 2 SnC composites

Erosion behaviour of composite Al-Cr cathodes in cathodic arc plasmas in inert and reactive atmospheres

Arc ablation properties of Ti3SiC2 material

Corrosion behavior and mechanism of Cu/Ti3AlC2 composites under arc discharge in different atmospheres

Effect of Contact Materials on the Transient Characteristics of Vacuum Arc Plasma and Anode Erosion

Characteristics Of Arc Erosion For Cu-C Composite Materials In Air

Effect of Burning Conditions on Erosion Shape of Cathode in Pulsed Cathodic Arcs

High Temperature Erosion Properties of Arc-Sprayed Coatings Using Various Cored Wires Containing Ti–Al Intermetallics

Effect of nitrogen protective atmosphere on microstructure and property of nanocomposite coating

Anisotropic Arc Erosion Resistance of Ag/Ti3AlC2 Composites Induced by the Alignment of Ti3AlC2

Erosion effects of atomic oxygen on carbon nanotube arrays in different incidence direction