Abstract:This work was initiated with the purpose of expanding the utilization of nickel-based composite coatings, especially in wear and corrosion-related industrial applications. NiCoP coatings have long attracted scientific and engineering interest due to their enhanced mechanical properties reinforced by incorporation with a reinforcement phase. In the present study, NiCoP composite coatings reinforced with ZrB2 ceramic particles were synthesized by direct current deposition using a modified Watt's type bath. The microstructures of composite coatings were studied by X-ray diffraction analysis, energy dispersive X-ray spectroscopy, and scanning electron microscopy, respectively. The hardness and tribological properties of the composite coatings were evaluated and compared. The corrosion behaviors of the deposits were investigated using electrochemical spectroscopy and potentiodynamic polarization techniques in simulated seawater. The effect of ZrB2 content on the microstructures and mechanical properties of the composite coatings was explored and discussed. The present study indicates that there is a progressive enhancement in the hardness, corrosion resistance, and wear resistance of the composite coatings with the increase in ZrB2 loading. The NiCoP-12 g/L-ZrB2 coating possesses the highest microhardness and superior wear performance, while the NiCoP-6 g/L-ZrB2 coating exhibits the best anti-corrosion properties. The present study shows a cost-effective and feasible solution for the preparation of NiCoP protective coatings with enhanced properties, which holds great potential for industrial applications requiring wear and anti-corrosion protection.

The Oxidation Performance for Zr-doped Nickel Aluminide Coating by Composite Electrodepositing and Pack Cementation

Influence of Substrate Composition on the Oxidation Performance of Nickel Aluminide Coating Prepared by Pack Cementation

Benefits of Zr Addition to Oxidation Resistance of a Single-Phase (ni,pt)al Coating at 1373 K

The Influence of Zirconium Carbide Addition on Oxidation Behaviour of NiAl Coatings Prepared by Cold Spraying of Ball-Milled Ni–Al Alloy Powder

Isothermal oxidation behavior of NiCoCrAlY/ZrO2 composite coating on γ-TiAl alloy

(Invited) Benefits of Zr Addition on Hot Corrosion and Isothermal Oxidation Resistance of Single-Phase (ni,pt) Al Coatings

Fabrication and Characterization of Ni–Zr Composite Coatings Using Electrodepositing Technique

Fabrication and Characterization of Electroless Ni–P–ZrO 2 Nano-Composite Coatings

High-temperature oxidation and wear resistance of nano-ZrB 2 reinforced CoNiCrAlY composite coating via a step-fashion mechanical alloying powder process

Effect of Isothermal Oxidation on the Structural Properties of (Ni,Pt)Al Coatings Doped with Zr at 1150 °C

Tribological Properties and Corrosion Resistance of Porous Structure Ni-Mo/ZrO2 Alloys

Oxidation Behavior of Cast Ni3Al Alloys and Microcrystalline Ni3Al+5% Cr Coatings with and without Y Doping

Synthesis of Ni-Al-ZrO2(Y2O3) Composite Coatings with Excellent Wear Resistance Through Mechanical Alloying Combined with Pulse Electrodeposition

Enhanced mechanical properties and corrosion resistance of electro-deposited NiCoP composite coatings with ZrB2 particle addition

Effect of Nickel Aluminide Microcrystalline Coating on High-Temperature Oxidation Behavior of NiAl-33.5%Cr-0.5%Zr Alloy

Electrodeposition of Ni Matrix Composite Coatings Containing Zrc Particles

Oxidation Performance and Interdiffusion Behavior of a Pt-Modified Aluminide Coating with Pre-deposition of Ni

Effects of plasma-sprayed NiCrAl/ZrO2 intermediate on the combination ability of coatings

Increasing hot corrosion resistance of β-(Ni, Pt)Al coating by replacing Pt partially with Zr

The microstructure and wear resistance characteristics of electroformed nickel and partially stabilized zirconia composite coatings

Study on Electroless Ni–P–ZrO2 Composite Coatings on AZ91D Magnesium Alloys