Abstract:Laser double-wire MIG arc hybrid welding has the characteristics of large weld penetration,high metal deposition rate and good welding quality,however,the underlying interaction is so complicated that it brings some difficulties in the practical applications.A coupling mechanism between two arcs and laser-induced plasma is proposed based on the electromagnetic field theory.When the difference between the Lorentz force and electric field force generated by the two arcs acting on the electrons in the middle part of the laser induced plasma is significant,the electron distributions at two ends of plasma are not uniform,which causes one arc bend,the driving force to be reduced along the wire axis,and the droplet transfer become more difficult.When the two force are balanced,the electron distributions at two ends are relatively uniform,and the plasma can attract and stabilize the two arcs,which results in a smooth droplet transfer.Laser double-wire MIG arc hybrid welding process is experimentally studied by using the high speed photography system and signal acquisition system,and the results show that when the welding process parameters are not suitable,the arc severely deviates from the wire axis so that unstable globular transfer and short circuiting transfer occur.In contrast,when the welding process parameters are suitable,the roots of the two arcs are fixed to the bottom of laser induced plasma and a smooth and directional spray metal transfer with low spatter loss is achieved.

Research on Arc Interference Mechanism of Multi-wire CO2 Welding

Research Status of Arc Interference During Multi-wire Gas Shielded Arc Welding

Analysis of Arc Interference and Interruption in Double-Wire GMAW Welding

Research on Arc Interference and Welding Operating Point Change of Twin Wire MIG Welding

Study Of The Effect Of Interference During Multi-Wire Gmaw Based On Spectral Diagnosis Technique

Research on Arc Interruption of Triple-wire GMAW

Stability Analysis of Electrical Signal in CO2 Flux-Cored Double Wire GMAW

Arc Interference Behavior During Twin Wire Gas Metal Arc Welding Process

Analysis of arc interference and welding stability in twin wire GMA welding

Influence of Interwire Distance and Arc Length on Welding Process and Defect Formation Mechanism in Double-Wire Pulsed Narrow-Gap Gas Metal Arc Welding

Polarities effect on arc interference in triple-electrode CO2 fillet welding

Study on Coupling Mechanism and Metal Transfer in Laser Double-Wire MIG Arc Hybrid Welding

Effects of Coupling Between the Laser Plasma and Two Arcs on Metal Transfer in CO2 Laser Double-Wire MIG Hybrid Welding

Analysis on Weld Quality and Stability by Triple-Electrode High Speed CO2 Welding

Microstructure and Mechanical Properties of a Weld Seam from Magnetron High-Current CO2 Welding

Analysis and control of short-circuit experience in short-circuit CO2 welding

The Mechanisms of Arc Coupling and Rotation in Cable-Type Welding Wire CO2 Welding

Influence of Distance Between Laser and MIG Arc on Drop Transfer Process of CO_2 Laser-Mig Hybrid Welding

Effect of current configuration on weld properties and microstructure in synchronised twin-wire pulsed MAG welding

Study and Application of Process Performance and Welding Wire of CO2 Welding and MAG Welding

Molten Droplet Size Control in Short-Circuiting CO2 Arc Welding