Abstract:Upon facing a pressure equipment with a structure defect and the subsequent question as to if the equipment is qualified for continuous operation, the answer often resorts to enough strength. However, strength of a pressure equipment is never defined clearly. In API 579, in order for a pressure equipment with a local thin area (LTA) defect to be accepted for continuing use in operation, the remaining strength factor (RSF) of the equipment must exceed 0.9. RSF is defined as the ratio of the plastic collapse load (PCL) of equipment with defect to that of the equipment without any damage. Hence, accurate evaluation of the plastic collapse load is of utter importance to judge fitness of the equipment. In this research, a finite element (FEM) based methodology has been devised to obtain an accurate estimation of the plastic collapse load. What needs to be established first is a finite element model for the whole, undamaged vessel as the main model and the other is the surrounding region encompassing the LTA defect as the sub-model. Pressure loadings are incrementally and continuously applied to the main model through load steps until the model can no longer sustain, and the plastic collapse load is the maximum load that a structure can safely carry. The cut boundary data from the main model is then passed on to the sub-model, and calculation is resumed with the same load steps until the PCL of the LTA is obtained. Then RSF is determined as the PCL of the vessel with an LTA to that of the original, damage free vessel. API 579 and ASME FFS propose the use of RSF as an indicator for assessing fitness of an equipment. Concept-wise, the term RSF is not sophisticated and sometimes is treated as rough guidance for assessing the remaining strength of a structure. However, the same concept must be treated differently as it is applied to determine whether the defect is allowed and the remaining life is needed, which ought to be a finite element-based approach. In this research, it is achieved through: 1. Representing the defect in the form of a submodel consisting of SOLIDS element in order to process the area of varied thicknesses, and. 2. Computing the plastic collapse load for both the undamaged finite element model of SHELL elements and the submodel of SOLIDS elements simultaneously.

Surface Defect Inspection of Pressure Equipment Based on Indentation and Numerical Simulation

Depth-Sensing Indentation-Based Studies of Surface Mechanical Behavior and Fatigue Damage Evolution of an Austenitic Stainless Steel Subjected to Cyclic Straining

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Molecular dynamics simulation on nanoindentation response of a copper workpiece

0701 Molecular Dynamics Simulation of Nano-Contact Between a Diamond Cutting Tool and a Copper Surface

Novel method for measuring surface residual stress using flat-ended cylindrical indentation

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

An approach for obtaining surface residual stress based on indentation test and strain measurement

Microscale Numerical Simulation On Dynamic Damage For The Deflagrated Pressure Vessels

Modeling Effect of Surface Roughness on Nanoindentation Tests

Failure pressure prediction by defect assessment and finite element modelling on pipelines containing a dent-corrosion defect

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

Experimental Study of the Effects of Surface Defects on Rolling Contact Fatigue Behavior

Square indentation on a soft elastomer layer with finite thickness

Molecular Dynamics And Multiscale Simulations Of Nanoindentation And Nanoscratch

An adaptive spherical indentation test integrating targeted testing scenarios, data acquisition, and model selection for uniaxial mechanical property predictions

A finite element-based analysis approach for computing the remaining strength of the pressure equipment with a local thin area defect

Numerical and Experimental Study of the Roughness Effects on Mechanical Properties of AISI316L by Nanoindentation

The Influence of Indenter Tip Imperfection and Deformability on Analysing Instrumented Indentation Tests at Shallow Depths of Penetration on Stiff and Hard Materials

A strain-dependent ductile damage model and its application in the derivation of fracture toughness by micro-indentation

Quantitative Detection of the Defects in Thin-Walled Pressure Vessels with Holography and Shearing Speckle Interferometry