Abstract:Increasing demand of electricity and severer concerns to environment call for green energy sources as well as efficient energy conversion systems. SCO2 power cycles integrated with concentrating solar power (CSP) are capable of enhancing the competitiveness of thermal solar electricity. This article makes a comprehensive review of supercritical CO2 power cycles integrated with CSP. A detailed comparison of four typical CSP technologies is conducted, and the cost challenge of currently CSP technologies is pointed out. The thermophysical properties of sCO(2) and the corresponding two real gas effects are analyzed elaborately to express the features of sCO(2) power cycles. An extensive review of sCO(2) layouts relevant for CSP including 12 single layouts and 1 combined layout is implemented logically. Strengths and weaknesses of sCO(2) power cycles over traditional steam-Rankine cycle generally adopted in current CSP plants are concluded, followed by metal material degration summary in CSP relevant temperature sCO(2) environment, which shows that the nickel-based alloy is a proper structural material candidate for sCO(2)-CSP integration. Thermodynamic analyses of sCO(2) power cycles when integrated with CSP are divided into three level of which design-point analysis and off-design modeling are conducted and compared, more researches into the off-design point analysis, dynamic modeling, especially the transient behavior are suggested. Economic analysis of the integrated system is concluded and presents a considerable levelized cost of electricity reduction of 15.6% to 67.7% compared to that of state of art CSP. Taking the thermodynamic and economic analysis into consideration, target designs of sCO(2) power cycles for CSP are summarized in three aspects. Finally, current theoretical and experimental researches of sCO(2) power cycles integrated with CSP for market penetration are introduced. The strengths, weaknesses, and potential solutions to the gaps of three potential pathways (molten salt pathway, particle pathway, and gas phase pathway) to realize the integration of sCO(2) power cycles in the next CSP generation plants up to 700 degrees C are reviewed. In general, the integration of sCO(2) power cycles with CSP technologies exhibits promising expectations for facilitating the competitiveness of thermal solar electricity.

Integration between supercritical CO2 Brayton cycles and molten salt solar power towers: A review and a comprehensive comparison of different cycle layouts

Thermodynamic performance analysis of different supercritical Brayton cycles using CO2-based binary mixtures in the molten salt solar power tower systems

Thermodynamic Analysis and Comparison for Different Direct-Heated Supercritical CO2 Brayton Cycles Integrated into a Solar Thermal Power Tower System

Thermodynamic Analysis and Optimization of a Molten Salt Solar Power Tower Integrated with a Recompression Supercritical CO2 Brayton Cycle Based on Integrated Modeling

Part-load Performance Analysis and Comparison of Supercritical CO2 Brayton Cycles

Efficient turbomachinery layout design and performance comparison of supercritical CO2 cycles for high-temperature concentrated solar power plants under peak-shaving scenarios

Parametrized Analysis and Multi-Objective Optimization of Supercritical CO2 (S-CO2) Power Cycles Coupled with Parabolic Trough Collectors

Performance Comparison of SPT Systems Integrated with Various Supercritical CO2-based Mixture Brayton Cycles Based on Multi-Objective Optimization

Supercritical CO2 mixture Brayton cycle with floating critical points for concentrating solar power application: Concept and thermodynamic analysis

Review of Supercritical CO2 Power Cycles Integrated with CSP

Thermodynamic analysis of supercritical Brayton cycles using CO2-based binary mixtures for solar power tower system application

Performance Comparison of Three Supercritical CO2 Solar Thermal Power Systems with Compressed Fluid and Molten Salt Energy Storage

A systematic comparison of different S-CO2 Brayton cycle layouts based on multi-objective optimization for applications in solar power tower plants

Thermo-Economic Optimization Of Supercritical Co2 Brayton Cycle On The Design Point For Application In Solar Power Tower System

Review of supercritical CO2 power cycle technology and current status of research and development

Optimal Integration of Recompression Supercritical CO2 Brayton Cycle with Main Compression Intercooling in Solar Power Tower System Based on Exergoeconomic Approach

A Study of New Method and Comprehensive Evaluation on the Improved Performance of Solar Power Tower Plant with the CO2-based Mixture Cycles

Thermodynamic analysis of CO2-SF6 mixture working fluid supercritical Brayton cycle used for solar power plants

A Review on Integrated Design and Off-Design Operation of Solar Power Tower System with S–CO2 Brayton Cycle

Design and performance analysis of compressed CO2 energy storage of a solar power tower generation system based on the S-CO2 Brayton cycle

Optimal selection of supercritical CO2 Brayton cycle layouts based on part-load performance