Abstract:Tungsten carbide (WC), celebrated for its exceptional strength, hardness, and chemical inertness, serves as an exemplary reinforcement for copper (Cu) matrix composite (CMC) coatings, significantly enhancing their wear and corrosion resistance. However, the inherent poor wettability and interfacial bonding between WC and Cu during the cold spray additive manufacturing process pose challenges to further performance improvement of these coatings. This study investigates cold-sprayed CMC coatings reinforced with WC particles, both with and without an electroless plated cobalt (Co) shell (Co@WC; at 10 wt.% and 20 wt.%), focusing on their microstructure, mechanical properties, tribological behavior, and electrochemical corrosion resistance. The findings indicate a reduction in CMC coatings` porosity and mean free path (MFP) of reinforcement particles with increasing reinforcement content. Despite slight Co shell damage during deposition, ceramic retention is notably enhanced, reaching up to 149.3%. The microhardness and wear resistance of CMC coating are improved with decreased MFP and increased ceramic content. Compared to the Cu coating, the microhardness of CMC coatings escalates by up to 32.9% (151.8HV0.1), and the specific wear rate is dramatically reduced by up to 84.2%. The Co shell effectively prevents the detachment of Co@WC particles, thereby enhancing the bending and wear resistance. Electrochemical corrosion tests, encompassing open circuit potential (EOCP), polarization curve, and electrochemical impedance spectroscopy (EIS), indicate that lower porosity, high ceramic content and the Co shell substantially boost the corrosion resistance of the CMC coating. Specifically, the coating with 20 wt.% Co@WC (Cu20(Co@WC)) demonstrates superior corrosion resistance compared to the Cu coating, hinting at the potential for further enhancement with increased ceramic content.

Molten Salt Synthesis of Continuous Tungsten Carbide Coatings on Graphite Flakes

Growth kinetics of titanium carbide coating by molten salt synthesis process on graphite sheet surface

A Simple and Feasible Method for Preparing Chromium Carbide Coating on Graphite Through Binary NaCl-KCl Molten Salt

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Molten salt synthesis of Cr3C2-coated flake graphite and its effect on the physical properties of low-carbon MgO–C refractories

Cold-sprayed Cu Matrix Composite Coatings with Core-Shell Structured Co@WC Reinforcements on Q235 Steel

A novel approach to fabricate WC reinforced W Cu composites via MSC and infiltration method

Characteristics of Tungsten Coatings Deposited by Molten Salt Electro-Deposition and Thermal Fatigue Properties of Electrodeposited Tungsten Coatings

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Preparation and Corrosion Resistance of Chromium Carbide Coating on Graphite by Disproportionation Reaction in Molten Salt

Microstructure and Formation Mechanism of WC Coating on Tungsten Fabricated by Interstitial Carburization: A Multiscale Investigation

Effect of Composition of Molten Salt on Tungsten Layer of the Electrodeposition

Electrochemical Behavior of Tungsten in (nacl–kcl–naf–wo3) Molten Salt

Synergistic effects of tungsten coating on the microstructure, thermophysical and mechanical properties of graphite flakes reinforced copper matrix composites

Electrochemical behavior of tungsten in the (NaCl-KCl-NaF-Na2WO4) molten salt

Diffusion mechanism in molten salt baths during the production of carbide coatings via thermal reactive diffusion

Characterization of Cr Coating Obtained on Micrometer-Scale Diamond Particles Prepared by Molten Salt Method

Synthesis of Stoichiometric Titanium Carbide by a Combination of Carbothermal Reduction and Molten Salt Method and Its Characterization

A New Strategy to Efficiently Fabricate Tungsten Carbide Coating on Tungsten: Two-step Interstitial Carburization

A Novel Molten-Salt Method to Produce Nanocrystalline WS2

Synthesis of nanocrystalline cubic substoichiometric WC1 − z powders by mechanochemical technology