Abstract:The research and development of a non-mercury catalyst for China's PVC (polyvinyl chloride) industry is extremely urgent. Gold (Au) loaded on activated charcoal (AC), as a potential novel catalyst with high activity, has been regarded as an ideal substitute for mercury. However, the deactivation of a gold catalyst caused by acetylene for long-term industrial applications is a big challenge. In this work, a new methodology of ligand screening and design for gold catalysis was constructed. Trichloroisocyanuric acid (TCCA) was proved to be an excellent ligand. Besides, copper (Cu) was added and proved to be a favorable synergistic metal so that the content of Au in the catalyst could be further reduced to 0.2 wt% (weight percentage). Experimentally, the best ratio of each component was optimized to be Au : Cu : TCCA = 1 : 5 : 20. The prepared 0.2 wt% Au catalyst had a conversion of over 98% with over 99% selectivity during 24 h operation under the temperature of 180 °C and GHSV (gas hourly space velocity) of 90 h−1. Then, an over 6800 h pilot trial has been carried out to demonstrate its promising capability for practical applications. Moreover, several characterization methods accompanied by DFT calculations were used, and it was proved that the high stability after TCCA introduction may come from its high ability to prevent high valence Au from being reduced and to inhibit the coking effect and that the electron interaction between Au and Cu could facilitate the dispersion of Au and lead to higher catalytic activity.

The Kinetics Model and Fixed Bed Reactor Simulation of Cu Catalyst for Acetylene Hydrochlorination

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Cstr Model for P-Xylene Oxidation Reactor

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Evaluation and application of kinetic models for Cu-catalyzed acetylene hydrochlorination

Simulation Analysis of Fixed Bed Reactor for Au-Cu Non-Mercury Catalytic Acetylene Hydrochlorination

Acetylene Hydrogenation Processes Studied Using CFD in a Packed Bed Reactor

Kinetics of Acetylene Hydrochlorination over Bimetallic Au–Cu/C Catalyst

A Ligand Coordination Approach for High Reaction Stability of an Au–Cu Bimetallic Carbon-Based Catalyst in the Acetylene Hydrochlorination Process

Gas-Phase Catalytic Hydrochlorination of Acetylene in A Two-Stage Fluidized-Bed Reactor

CFD Modeling Using Heterogeneous Reaction Kinetics for Catalytic Dehydrogenation Syngas Reactions in a Fixed-Bed Reactor

Catalytic Activity of Au-K/C Catalyst for Acetylene Hydrochlorination

Reaction and regeneration process of a novel Bi-Cu/SiO 2 catalyst for hydrochlorination of acetylene to produce vinyl-chloride monomers

Deactivation of Au-Cu-K mercury-free catalyst in hydrochlorination of acetylene

Deactivation Mechanism and Regeneration of Carbon Nanocomposite Catalyst for Acetylene Hydrochlorination

A CFB reactor model for the synthesis of acrylonitrile

Comprehensive CFD Simulation of the Optimizations of Geometric Structures and Operating Parameters for Industrial Acetylene Hydrogenation Reactors

Simulation and Optimization of Acetylene Converter with Decreasing Catalyst Activity

Tunable Redox Cycle and Enhanced Π-Complexation in Acetylene Hydrochlorination over RuCu Catalysts