Abstract:This contribution proposes a novel process for VCM production. To eliminate hot spots, fluidized-bed, rather than fixed-bed, was selected as the reactor. Bi/Cu/H3PO4 series catalyst supported on silica gel was employed to replace the industrial HgCl2 catalyst, and exhibited acceptable initial activity (30% activity of HgCl2) and stability in differential reactor referring to that of HgCl2 catalyst under the condition of 200°C and 360h−1 (space velocity, volume based). The coke covered on the active sites during reaction led to rapid catalyst deactivation. Therefore, several types of regeneration method were explored to burn off the coke. The two-step regeneration method in which the H2O and air were fed respectively to promote regeneration revealed good ability in recovering catalyst activity. The fluidized bed reactor (FBR) was selected to prevent formation of hot spots because of its excellent heat transfer capacity, which is tens of times to fixed bed reactor. Over 700h industrial trial was operated in FBR, which exhibited good performance in conversion of C2H2, maintaining around 80% in former 200h and detecting by-product no more than 100ppm, while the loss of activity components in high temperature was still a main problem after circulating regeneration cycles. Overall, the trials present a very promising green process in replacing the previous contaminated one for PVC industry.

Technology progress in industrial hydrochlorination of acetylene to vinyl chloride

Research Progress of Catalysts in Synthesis of Vinyl Fluoride by Vapor Phase Hydrofluorination of Acetylene

Technology Progress of P-Xylene Oxidation Reactor

Vinyl chloride technology: Present and future

Progress on Reforming of Carbon Dioxide and Methane to Synthesis Gas by Thermal Plasma

Research Progress in the Polymerization of Vinyl Chloride

Gas-Phase Catalytic Hydrochlorination of Acetylene in A Two-Stage Fluidized-Bed Reactor

Advances in Single-Atom-Catalyzed Acetylene Hydrochlorination

Progress of the reactor technology for oxidation of n-butane to maleic anhydride

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

Progress in thermal plasma reactor used for coal pyrolysis to acetylene

Latest Advances on the Reserch for Technics in VCM Production of Balanced Oxychlorination

Progress in mercury-free catalysts for acetylene hydrochlorination

Development and prospect of the acetylene production chain based on the process systems engineering: a focus on the polyvinyl chloride production

Research Progress of Dimerization of Acetylene to Monovinylacetylene

A Low Content Au-Based Catalyst for Hydrochlorination of C2h2 and Its Industrial Scale-Up for Future Pvc Processes

Continuous Vinyl Chloride Monomer Production by Acetylene Hydrochlorination on Hg-free Bismuth Catalyst: from Lab-Scale Catalyst Characterization, Catalytic Evaluation to a Pilot-Scale Trial by Circulating Regeneration in Coupled Fluidized Beds

Green Production of PVC from Laboratory to Industrialization: State-of-the-art Review of Heterogeneous Non-Mercury Catalysts for Acetylene Hydrochlorination

The Kinetics Model and Fixed Bed Reactor Simulation of Cu Catalyst for Acetylene Hydrochlorination

Photocatalytic Acetylene Hydrochlorination by Pairing Proton Reduction and Chlorine Oxidation over g-C 3 N 4 /BiOCl Catalysts

Research Progress in the Pyrolysis of 1-Chloro-1,1-difluoroethane to Vinylidene Fluoride