Abstract:Polyvinyl chloride (PVC) waste plastic is a typical solid waste. In this paper, the dechlorination and carbonization behavior of PVC in ethanol-water/water system under different process parameters (temperature, residence time, solid-liquid ratio) was studied, and hydrothermal carbon was characterized by SEM, elemental analysis, TG-DTG, XPS, Py-GC/MS. The results show that temperature is the key to the hydrothermal dechlorination of PVC, and the dechlorination efficiency of PVC is the highest by parameter optimization (220°C-90 min-10% S/D-80% E/D), which can reach 96.33 %. With the removal of Cl, the surface of the PVC matrix changed from full and smooth flocculent to honeycomb with uniform pore size distribution. Thermogravimetric analysis shows that the combustion of hydrochar can be divided into three stages: HCl precipitation and volatile combustion, semi-coke and coke combustion, and fixed carbon combustion. The combustion parameters and kinetic parameters of hydrochar were measured, and it was found that the hydrothermal carbonization of PVC at higher temperatures and ethanol-water ratio could improve the combustion performance of hydrochar. The highest calorific value can reach 36.68 MJ/mol. Py-GC/MS analyzed the distribution of the pyrolysis products, and alkylbenzene and aliphatic were the main products of pyrolysis. The structural analysis of hydrochar showed that C-C and CC accounted for the largest proportion, accompanied by a small amount of C-O and CO and trace C-Cl. The possible reaction mechanism of the hydrothermal carbonization of PVC was analyzed based on the distribution of functional groups and compound composition. This work provides an effective and sustainable method for the recycling of refractory chlorinated plastics.

Research Progress in the Pyrolysis of 1-Chloro-1,1-difluoroethane to Vinylidene Fluoride

Research Progress of Catalysts in Synthesis of Vinyl Fluoride by Vapor Phase Hydrofluorination of Acetylene

Catalytic Effect of Active Carbon Supported Metal Chloride on the Pyrolysis 1-Chloro-1,1-difluoroethane to Vinylidene Fluoride

Pyrolysis of Polyolefins Using Rotating Arc Plasma Technology for Production of Acetylene

Study on thermodynamic properties of fluoroethane

A safe and efficient process for the preparation of difluoromethane in continuous flow

Technology progress in industrial hydrochlorination of acetylene to vinyl chloride

Sorption kinetics of 1-fluoro-1,1-dichloroethane in vinylidene chloride–acrylonitrile–styrene terpolymer

Preparation of 1,1,1, 2-tetrafluoroethane (HFC-13 4a) by vapor-phase catalytic fluorination

Research Progress in the Polymerization of Vinyl Chloride

STUDY ON THE EXPANDING BEHAVIOR OF VINYLIDENE CHLORIDE-ACRYLONITRILE-STYRENE TERPOLYMER PARTICLES

Pyrolysis of a Perfluoro Copolymer and Its Contribution to Hydrogen Fluoride (HF)

Fluorinated Cobalt Catalysts and Their Use in Forming Narrowly Dispersed Polyethylene Waxes of High Linearity and Incorporating Vinyl Functionality

Supercritical water co-gasification of waste R134a and plastics to produce valuable chemicals and fuels: ReaxFF reactive molecular dynamic simulation

Metal‐Catalyzed Polymer Dehydrochlorination and Hydrodefluorination

Progress in Catalytic Decomposition of Chlorofluorocarbons

Studies on Oligomerization and Kinetic of Pyrolyzing Trifluoromethane to Tetrafluoroethylene and Hexafluoropropylene

Vinyl chloride technology: Present and future

Progress in Preparation of Β,β-Difluorovinyl Compounds

BaF(p-BDC)0.5 as the Catalyst Precursor for the Catalytic Dehydrochlorination of 1-Chloro-1,1-Difluoroethane to Vinylidene Fluoride

Hydrothermal carbonisation of polyvinyl chloride in ethanol-water/water system for solid fuels: Dechlorination, characteristics analysis of hydrochar, and reaction path