Abstract:Biomass fast pyrolysis fluidized bed reactor is regarded as one of the most promising technologies for high value utilization of biomass. In this work, one two-dimensional fluidized bed reactor model was established, coupling with multiphase CFD simulation method and pyrolysis reaction kinetics, and further verified by the experimental data. This work mainly investigated the effects of biomass inlet and nitrogen inlet modes on multi-process characteristics, such as flow behavior, heat transfer and pyrolysis reaction. The synergistic effects between the two inlet modes were further explored and thus would affect the three-phase pyrolysis product distribution. The results showed that the spatial particle distribution and temperature distribution in the dense phase zone were becoming more uniform and the tar yield increased when the biomass inlet mode changed from single nozzle to double nozzles jetting opposite. Besides, when the nitrogen nozzle number was set as one and the auxiliary gas velocity was set as 0.15 m/s, much larger local circulation formed in the dense phase zone, meanwhile the particle volume fraction and temperature became more evenly distributed, which was conducive to the biomass pyrolysis process. The nitrogen inlet mode was found to show a greater impact on the tar yield compared to the biomass inlet mode. For single gas inlet mode, one biomass nozzle should be preferred for lower auxiliary gas velocity and the opposite double nozzle would be better for higher auxiliary gas velocity. The synergistic effects between biomass and nitrogen inlet modes were further summarized, which were found to have a positive impact on the biomass pyrolysis reaction characteristics. Based on the above conclusions, this work could provide a feasible theoretical guidance for designing fluidized bed pyrolysis reactor and optimizing the biomass pyrolysis process.

A CFB reactor model for the synthesis of acrylonitrile

CFD Modeling of Styrene Polymerization in a CSTR

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

Flow Distribution in a Novel Fixed Bed Bionic Reactor

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

Cstr Model for P-Xylene Oxidation Reactor

Deactivation Kinetic Study on Vapor Phase Beckmann Rearrangement of Cyclohexanone Oxime and Design of the Multi-Layer Inclined Channel Bionic Reactor

Ammoxidation of Propylene to Acrylonitrile in a Bench-Scale Circulating Fluidized Bed Reactor

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

The Kinetics Model and Fixed Bed Reactor Simulation of Cu Catalyst for Acetylene Hydrochlorination

Experimental and Model‐based Study of Biohydration of Acrylonitrile to Acrylamide in a Microstructured Chemical System

A Kinetic Study of the Biological Catalytic Hydration of Acrylonitrile to Acrylamide

Acetylene Hydrogenation Processes Studied Using CFD in a Packed Bed Reactor

Hydration of Acrylonitrile to Produce Acrylamide Using Biocatalyst in A Membrane Dispersion Microreactor

Modelling and Simulation of a Fluidized Bed Reactor for Minimum Ammonium Nitrate and Reduction of NOx Emissions

Numerical Simulation and Multi-Process Coupling Analysis for Biomass Pyrolysis Fluidized Bed Reactor Based on Synergistic Effects Between Biomass and Nitrogen Inlet Modes

Gas-Phase Catalytic Hydrochlorination of Acetylene in A Two-Stage Fluidized-Bed Reactor

A pilot plant study and 2-D dispersion-reactor model for a high-density riser reactor

Bioconversion of Acrylnitrile to Acrylamide Using Hollow-Fiber Membrane Bioreactor System