Abstract:The hot roll bending patchwork components of B1500HS uncoated ultra-high strength steel processed at industrial scale were welded with filler wire. The microstructure, grain orientation, mechanical properties and fracture behavior of the joint were investigated. The results showed that the weld metal (WM) was mainly composed of lath martensite and lower bainite (LB). Various microstructure appeared in different positions of the HAZ, among which martensite-austenite (M-A) constituents in the incompletely quenched zone and tempered martensite (TM) in the tempered zone were the key factors determining the performance of the joint. The welded joint exhibited complex structure and anisotropic mechanical response due to the decarburization and rolling texture of the original base material (BM). In the tempered zone, lath merge and boundaries disappear lead to the annihilation of dislocations, carbide precipitation leads to reduction of mobile dislocations, and recrystallization and recovery eliminate work hardening. The reduction of the effect of dislocation strengthening results in the formation of a softening belt at 6 mm from the center of the weld, with a minimum hardness of 266 HV. The tensile strength of the joint in the rolling direction (RD) was 983 MPa, and the fracture occurred in the softening belt. Both brittle and ductile fracture features were observed. The reason why the fracture occurs in the high temperature tempered zone instead of the incompletely quenched zone was the difference in the effect of "constraint strengthening". Fracture occurred through delamination cracking along the "weak interface" owing to precipitated high-hardness cementite particles and the unfavorably oriented ferrite cleavage planes.

Butt Welding of 2205/X65 Bimetallic Sheet and Study on the Inhomogeneity of the Properties of the Welded Joint

Single pass fiber laser butt welding of explosively welded 2205/X65 bimetallic sheets and study on the properties of the welded joint

Study on Microstructure and Properties of Welded Joint of L360QS/N08825 Bimetallic Composite Pipe

Increased Quality and Welding Efficiency of Laser Butt Welding of 2205/X65 Bimetallic Sheets with a Lagging MIG Arc

Study on the microstructure and mechanical properties of explosive welded 2205/X65 bimetallic sheet

Microstructure of a Domestically Fabricated Dissimilar Metal Weld Joint (SA508-52M-309L-CF8A) in Nuclear Power Plant

Insights into microstructure evolution and fracture mechanisms of welded joints of high strength steel patchwork components

Microstructures and Performances of the Butt Joint of TA1/Q235B Bimetallic Sheet with Addition of a Mo Interlayer by Using Narrow Gap Laser Welding with Filler Wire

Microstructure and mechanical properties of butt joints of QCr0.8／1Cr21NiSTi equal-thickness dissimilar materials by electron beam welding

Effects of Welding Layer Arrangement on Microstructure and Mechanical Properties of Gas Metal Arc Welded 5083/6005A Aluminium Alloy Butt Joints

Microstructures and Mechanical Properties of Weld Metal and Heat-Affected Zone of Electron Beam-Welded Joints of HG785D Steel

Microstructure and Performance of Hybrid Laser-Arc Welded 40 Mm Thick 316 L Steel Plates

Metallurgical and Mechanical Investigations of Aluminium-Steel Butt Joint Made by Tungsten Inert Gas Welding–brazing

Interface Microstructure and Mechanical Properties of Nickel/Steel Bimetal Composite Pipe Fabricated by Explosive Welding

Study of Microstructure and Fatigue in Aluminum/Steel Butt Joints Made by CMT Fusion-Brazing Technology

Multi-Pass Butt Welding of Thick TA5 Titanium-Alloy Plates by MIG: Microstructure and Properties

Microstructure and mechanical properties of TIG welded 20G/ 316L clad pipe joint

Spreading Behavior and Microstructure Characteristics of Dissimilar Metals TIG Welding–brazing of Aluminum Alloy to Stainless Steel

Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint

Microstructures of 2219 twin wire welded joints

Study of Microstructural Inhomogeneity and Its Effects on Mechanical Properties of Multi-Layer Laser Welded Joint