Abstract:Pitting damage severely degrades the mechanical properties of the main force-bearing member of a circular tube; it can also change its failure mode. Offshore high-strength seamless steel pipes with steel grade X52Q certified by ABS were selected for a pressure test and research. The constraint conditions of one hinged end and one fixed end were adopted to investigate the effect of the bending moment of the nodes so that any section of the circular tube can be subjected to the superposition of axial force and bending moment. Pitting craters were generated using mechanical processing methods; the effect of pitting parameters such as diameter, depth, and distribution on the mechanical properties and failure modes of circular pipes was explored. Pitting corrosion damage caused local stress concentration and the local cross-section weakening of the tube. In addition to the decline of the bearing capacity under the action of axial compression load, the failure mode of the pitting corrosion damage tube also showed differences. Increased local damage caused by the increase in the diameter of the pitting corrosion was likely to cause plastic hinges on the pits of the tube, and this changed stress conditions, failure modes, and failure locations of the components. An increase in the depth of the pitting craters resulted in a significant drop in the overall load-bearing capacity caused by local buckling. The location of pitting corrosion had negligible effect on the mechanical performance of the tube; the end distribution was more unfavourable than the centre distribution. The stress–strain distribution characteristics of the pitting area of the specimen were considerably different, and the stress concentration on the inner side of the pitting corrosion were serious and uneven. The results of the experimental analysis and several numerical examples indicated that pitting corrosion causes the pressure-bearing circular pipes with lower strength buckling to more likely suffer from an instability failure.

Investigation on the pitting corrosion properties of welded joints of bimetal composite pipe

Study on Microstructure and Properties of Welded Joint of L360QS/N08825 Bimetallic Composite Pipe

Failure analysis of L415/316L composite pipe welded joint

The fracture resistance and crack propagation path of L415/N08825 bimetallic composite pipe welded joint

Multiscale characterization of seawater pipe erosion of B10 copper-nickel alloy welded joints

Study on Stress Corrosion Cracking Behavior of Incoloy825/X65 Bimetallic Composite Pipe Welded Joint in Wet Hydrogen Sulfide Environment

Interface bonding and mechanical properties of large explosively welded titanium/aluminum composite pipes

Numerical simulation of residual stress in post internal-welding process of bimetal composite pipe and optimization of welding sequence

Investigation on the Fatigue Crack Propagation Behavior of L360MS Pipeline Steel Welded Joints with Inconel 625 Weld Metal

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Investigation on the microstructure and mechanical properties analysis of 304L stainless steel multi-pass filler welding joint for pipeline

Analysis of the Mechanical Properties of a Reinforced Thermoplastic Composite Pipe Joint

Numerical Simulation and Experimental Confirmation of a Bimetallic Pipe Forming Process

Microscopic investigation on pitting corrosion of Ni-Cr-Mo-V high-strength steel weldment in simulated deep-sea environment

Insight into the corrosion susceptibility and failure mechanism of Cu-Ni alloy pipeline welded joints in simulated marine environment

Study on Corrosion Resistance of Carbon Steel/Stainless Steel Composite Pipe

Experimental study on the compression mechanical behaviour of steel pipes with mechanically induced pitting corrosion

Failure analysis of 2205 duplex stainless steel connecting pipe for composite plate pressure vessel in a high pressure gas field

Effect of Microstructure on Mechanical Properties of X65MS Welded Pipe Joint

Microstructural Evolution and Micro-Corrosion Behaviour of Flash-Welded U71Mn Joints as a Function of Post-Weld Heat Treatment

MICROSTURE AND PITTING CORROSION RESISTANCE OF UNS S32304 DUPLEX STAINLESS STEELS WELDED JOINT WITH PLASMA-ARC WELDING