Abstract:Incorporation of in‐situ Sn4+ doping and nano‐macro structure within TNO anode materials using facile one‐step co‐precipitation method achieves high Li+ diffusion coefficient and excellent high‐rate reversible capacities. Titanium niobium oxide (TNO) exhibits great potential as a lithium‐ion battery anode due to its high capacity, minimal volume change during cycling, and safe good operation characteristic enabled from its voltage profile. However, its intrinsically low electronic and ionic conductivity hinders its potential for practical applications. This work proposes a facile coprecipitation method to address these limitations by incorporating a nano‐macro structure and in situ Sn ion doping into bulk TNO. This approach ensures homogeneous integration of TNO precursors and the Sn dopant at a molecular level within the co‐precipitation nanoparticles. Additionally, the use of low toxicity solvents facilitate scalability of the synthesis process. Excellent rate capability, high reversible capacities, and good capacity retention are achieved simultaneously due to synergistic effects of the bulk doping, which expands the crystal volume and enhances Li+ diffusion, combined with abundant surface area of the nano‐macro structures. The specific capacity of Sn‐doped TNO nanospheres remains at 180 mAh/g at a high current density of 40 C (1 C=400 mA g−1), which is nearly four times higher than that of undoped samples. Furthermore, the cyclic voltammetry analysis at various scanning rates reveals an increased Li+ diffusion rate in Sn doped titanium niobium dioxide.

Co-Precipitation Synthesis and Electrochemical Properties of Crnbo4 Anode Materials for Lithium-Ion Batteries

Ton-scale preparation of single-crystal Ni-rich ternary cathode materials for high-performance lithium ion batteries

Synthesis And Electrochemical Properties Of Li1.3nb0.3cr0.4o2 As A High-Capacity Cathode Material For Rechargeable Lithium Batteries

The electrochemical performance of nickel chromium oxide as a new anode material for lithium ion batteries

Exploration of Cr0.2Fe0.8Nb11O29 As an Advanced Anode Material for Lithium-Ion Batteries of Electric Vehicles

Facile Synthesis Of Nico2o4 Nanorod Arrays On Cu Conductive Substrates As Superior Anode Materials For High-Rate Li-Ion Batteries

Synthesis and electrochemical properties of Li<sub>1.3</sub>Nb<sub>0.3</sub>Cr<sub>0.4</sub>O<sub>2</sub> as a high-capacity cathode material for rechargeable lithium batteries

Surface modification of LiNi1/3Co1/3Mn1/3O2 with Cr2O3 for lithium ion batteries

Rational Synthesis of Cr0.5Nb24.5O62 Microspheres As High-Rate Electrodes for Lithium Ion Batteries.

An Efficient Synthetic Method To Prepare High-Performance Ni-Rich Lini0.8co0.1mn0.1o2 For Lithium-Ion Batteries

Facile synthesis and electrochemical characterization of Sn 4Ni 3/C nanocomposites as anode materials for lithium ion batteries

CrPO4/C Composite As a Novel Anode Material for Lithium-Ion Batteries

Large-scale preparation of cobalt niobate/reduced graphene oxide composite materials for high-performance lithium-ion battery anodes

Enhanced Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2 Cathode Materials by Ultrasonic-Assisted Co-Precipitation Method

A short process and low-cost preparation of single crystal LiNi0.6Co0.2Mn0.2O2 cathode for lithium-ion batteries

In-situ encapsulation of core-shell structured Co@Co3O4@CNOs as anode for lithium-ion batteries with high rate performance

Nanostructural CoSnC Anode Prepared by CoSnO3 with Improved Cyclability for High-Performance Li-ion Batteries

Fast, One‐Step In Situ Synthesis of a Hierarchical Sn4+‐Doped TiNb2O7 Nanosphere as a High‐Performance Anode Material

Wadsley–Roth phase CoNb11O29 as a high-performance anode for lithium-ion batteries

Cr3+ and Nb5+ Co-Doped Ti2Nb10O29 Materials for High-Performance Lithium-Ion Storage

Preparation and Electrochemical Performance of Modified LiNi0.5Mn1.5O4Cathode Material for Lithium-ion Batteries