Abstract:Nowadays, the clean energy is of special concern researches owing to the unavoidable environmental pollutions. To satisfy the demand of sustainable development strategy, it is necessary to develop high-efficient and portable energy storage and conversion devices. Lithium ion batteries (LIBs) are considered as most promising electrochemical energy storage system in this era and are anticipated to power the mentioned applications. Herein, a facile and effective route has been developed for synthesis of CoO/reduced graphite oxide (RGO) composites as LIB anodes. In the synthesis, the GO prepared by the modified Hummers' method was dissolved into deionized water, and then mixed with Co(NO3)(2) solution. Subsequently, the obtained homogeneous solution was transferred into 100 mL Teflon-lined stainless-steel autoclave. The sealed autoclave was putted into an oven at 160 degrees C for 6 h. After cooled down to room temperature, the precursor of depositions were filtered, washed with deionized water and dried at 80 degrees C. Finally, the precursor was thermal treated at 500 degrees C for 2 h in a tube furnace under nitrogen ambient to obtain the final product of CoO/RGO composites. The synthetic composites were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD patterns proved that the composites were composed of CoO and graphene. SEM images indicated the CoO nanoparticles grown on the graphene nanosheets uniformly. The CoO nanoparticles loaded on the surface of graphene nanosheets could prevent the aggregation of graphene. Meanwhile, the graphene nanosheets could combine with each other to form a large 3D electron conductive network, which can promote the electrical conductivity of the composite. The LIB was assembled in glove-box, in which the composite electrode and metal lithium plate were used as the anode and the cathode, respectively. The electrochemical test results imply that the initial discharge specific capacity could be up to 1312.6 mAh.g(-1) at a current density of 100 mA.g(-1). Notably, the discharge specific capacity is still about 557.4 mAh.g(-1) after 300 cycles at a high current density of 10000 mA.g(-1). It is demonstrated that the composite exhibits high specific capacity, excellent rate capability and well cyclic stability. The 3D network could be used as a stable framework to accommodate the volume change of active material during Li+ insertion/extraction, which play important role for the superior electrochemical performance.

Large-scale preparation of cobalt niobate/reduced graphene oxide composite materials for high-performance lithium-ion battery anodes

Co3O4/RGO Nanoparticles Fabricated by Facile Solvothermal Method as an Anode Material for High‐Performance Lithium‐Ion Batteries

Nanostructured T-Nb2O5-based composite with reduced graphene oxide for improved performance lithium-ion battery anode

An Interlayer Nanostructure of Rgo/sn 2 Fe-NRs Array/rgo with High Capacity for Lithium Ion Battery Anodes

Preparation of RGO/NiO Anode for Lithium-ion Batteries

A Novel NiCo2O4@GO Hybrid Composite with Core-Shell Structure As High-Performance Anodes for Lithium-Ion Batteries

Reduced Graphene Oxide Uniformly Anchored with Ultrafine CoMn2O4 Nanoparticles As Advance Anode Materials for Lithium and Sodium Storage

Heteroatom Doped Rgo Encapsulated Nb2O5 Composite As High-Performance Anodes for Li-ion Batteries

Self-assembled NiCo2O4-anchored reduced graphene oxide nanoplates as high performance anode materials for lithium ion batteries

Ultra-small Co3O4 nanoparticles-reduced graphene oxide nanocomposite as superior anodes for lithium-ion batteries.

Design of Nb2O5@rGO composites to optimize the lithium-ion storage performance

Rational design of NiFe2O4–rGO by tuning the compositional chemistry and its enhanced performance for a Li-ion battery anode

Hierarchical Ultrafine Ni3V2O8 Nanoparticles Anchored on Rgo As High-Performance Anode Materials for Lithium-Ion Batteries

In Situ Prepared Reduced Graphene Oxide/coo Nanowires Mutually-Supporting Porous Structure with Enhanced Lithium Storage Performance

TiO2/NiO/reduced Graphene Oxide Nanocomposites As Anode Materials for High-Performance Lithium Ion Batteries

High-Capacity Anode Material for Lithium-Ion Batteries with a Core–Shell NiFe2O4/Reduced Graphene Oxide Heterostructure

Hydrothermal for Synthesis of Coo Nanoparticles/Graphene Composite As Li-Ion Battery Anodes

Facile preparation of CoSb2O6/rGO composite as the anode material of lithium-ion batteries

Optimization of NiFe2O4/rGO Composite Electrode for Lithium-Ion Batteries

Fabrication of NiO-ZnO/RGO Composite As an Anode Material for Lithium-Ion Batteries

Co/La-Doped NiO Hollow Nanocubes Wrapped with Reduced Graphene Oxide for Lithium Storage