Abstract:Vacuum residue (VR) is the heaviest distillation cuts of crude oil. Being very intractable, VR contains high amount of sulfur, metal and asphaltene. Conventional VR conversion technologies, including delayed coker and residue fluidized catalytic cracking, cannot remove those impurities efficiently, or have to employ strict pretreatments for feed stock to meet the equipment and catalyst requirements. Hydroprocessing and hydrocracking process can convert VR into lighter oils, and remove sulfur and metal content at high efficiency; the refining nature of hydrogenation reactions could also improve the molecular structures of product cuts, increasing the commercial values. According to the fluidization state of catalyst bed, the hydroprocessing reactor could categorized into fixed-bed, moving-bed and ebullated-bed reactors. Because of the high viscosity and sediment content of VR, ebullated-bed reactor (EBR) is preferred by petroleum refinery due to its fluidizing catalyst bed can prevent blockage while operating. Ebullated-bed residual oil hydroprocessing is one of the most efficient technology for vacuum residue (VR) conversion. SINOPEC has developed pump-free ebullated-bed reactor (PF-EBR), which is distinctive from conventional EBRs with expensive ebullated-promoting pumps. PF-EBR technology utilized structure-induced internal circulation to promote self-fluidization of micro-sphere catalyst, leading to significant reduce in CAPEX and energy consumption. SINOPEC has launched a 50 kta PF-EBR plant which validated the feasibility of this technology; the scale-up design still required intensive theoretical and engineering work to optimize the hydrcracking and sequential refining process. In this study, the operational results of the long-term test of the 50 kta unit were reported; the results demostrated PF-EBR was able to hydrocrack heavy vacuum residue into light oils with high conversion. A 5-lump axial-dispersion model was proposed for PF-EBR, which was further integrated with ASPEN HYSYS. With the aid of the efficiency and accuracy of the proposed model, a 3 million ton/year PF-EBR hydrocracking process with membrane-aided hydrogen recovery system was designed and simulated in HYSYS; the reaction kinetics and product distribution were validated and compared by batch and industrial experimental results, and the total liquid yield could reach 83.68% and 83.57% by EBR-DC (Delayed Coker) and EBR-FCC (Fluidized Catalytic Cracking) integration processes. This study reports the advances in ebullated-bed heavy oil hydrocracking technology, and provided efficient and model-based simulation tool for designing and optimizing PF-EBR hydrocracking processes.

Novel Ebullated Bed Residue Hydrocracking Process

Deactivation Kinetic Study on Vapor Phase Beckmann Rearrangement of Cyclohexanone Oxime and Design of the Multi-Layer Inclined Channel Bionic Reactor

Converting Vacuum Residue into Light Fuels by Self-Fluidized Pump-Free Ebullated-Bed Hydrocracking

Development of catalyst for STRONG ebullated-bed residue hydrotreating process

RESEARCH ON STRONG EBULLATED BED RESIDUE HYDROTREATING PROCESS

Optimization of Residual Oil Hydrocrackers: Integration of Pump-Free Ebullated Bed Process with Membrane-Aided Gas Recovery System

Present Situation and Prospect Analysis of Residue Ebullated Bed Hydrotreating Technology

Development of Residuum Hydroprocessing Technologies

Ebullated Bed Hydrogenation Technology in the Situation of Low-carbon Transition of Refining and Chemical Industry

Modeling on Scale-Up of an Ebullated-Bed Reactor for the Hydroprocessing of Vacuum Residuum

Novel Packed Bed Reactor Designed for Prileschajew Epoxidation of Fatty Acid Methyl Ester: Intensification of Mass/heat Transfer

Study on the Combined Process of Ebullated Bed Residue Hydroprocessing and Coking

Dynamic Impacts of Catalyst Management on Self-fluidized Pump-Free Ebullated-Bed Reactor

Suspended-bed hydrocracking process——a deep high-efficiency conversion process in rapid development for processing low-quality heavy oils

Improvement of Residue by Hydrocracking with Solid Acid,solid Base and Radical Initiators

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

Control of Pressure Balance and Solids Circulation Characteristics in DCFB Reactors

Research on the Coupling Principle of Revolution and Self-Rotation of Catalysts in a Bio-Oil Hydrodeoxidation Ebullated Bed Reactor

Hydrocracking of vacuum residue in a slurry phase reactor: effect of reaction temperature and properties of feedstock

A NEW INTEGRATION PROCESS OF RESIDUE HYDROTREATING COMBINED WITH CATALYTIC CRACKING

Cyclonic Gas Stripping Deoiling and Gas Flow Acceleration Classification for the Resource Utilization of Spent Catalysts in Residue Hydrotreating Process