Flows in Brush Seals Based on a 2-D Staggered Tube Bundle Model

黄首清,索双富,李永健,杨杰,刘守文,王玉明

DOI: https://doi.org/10.16511/j.cnki.qhdxxb.2015.22.005

2016-01-01

Abstract:The flows in brush seals were modeled using a two-dimensional closed staggered tube bundle model of the bristle pack cross section that was solved using computational fluid dynamics (CFD).The pressure and velocity distributions of the leakage were studied for various pressure differentials,number of axial bristle rows,and inter-tube spacing.The results show that the calculated pressures and velocities with 1 and 6 bristles in the circumferential direction are very similar with differences less than 3％ for each data point and the calculated pressure gradients agree with rotor surface pressure measurements.For an inlet pressure of 0.2 MPa,the pressure drop across the last downstream bristle is about 6 times that over the upstream bristles while the maximum velocity rise is about 8 times greater.The growing pressure differential exacerbates the pressure drop and the maximum velocity rise across the last downstream bristle.The average outlet axis velocity increases linearly with the increasing pressure differentials and deceases logarithmically with the number of axial bristle rows.The sealing effect can be significantly enhanced by reducing the inter-tube spacing of the bristles for normal pressure differentials and number of axial bristle rows.