Abstract:This paper investigates the leakage characteristics of brush seals including the flow field characteristic of brush seal and the effects of structural parameters on the leakage characteristic of brush seals with the consideration of bristle deflection. The flow field characteristic of brush seal was discussed based on three-dimensional (3-D) computational model of brush seal, two-way fluid–structure interaction and moving grid technique. Then the effect of structural parameters on the leakage characteristic of brush seals was investigated from theoretical and numerical simulation perspectives with the emphasis on an improved prediction formula of leakage flow rate of brush seals. As illustrated in the analysis of the leakage characteristics of brush seals, (1) the leakage with the influence of bristle deflection is closer to the results of experiment relative to that without bristle deflection, and increases with the increasing inlet/outlet pressure ratios, which validate the developed 3-D computational model with bristle deflection to be more reasonable; (2) the flow field characteristics (pressure and velocity) of brush seal are revealed reasonably; (3) with the increasing of the height of backing plate fence, the clearance of brush wire and the axial clearance between brush bristle and back plate, the leakage factor rises and then reaches a stable value when the clearance of brush is larger than 0.3 mm; moreover, (4) with the increase of brush wire diameter, the leakage factor decreases firstly and then tends to stabilization, while rapidly decreases at first, then slowly decreases, and lastly tends to a value when the bristle row number increases; (5) the reliability and accuracy of the proposed prediction equation for brush seals is validated to be high by the CFD computational results. The efforts of this paper provide a useful theoretical and numerical method to clearly understand the leakage characteristics of brush seal, which is beneficial to improve the design of brush seals.

Advance in the investigation of brush seal

Performance Analysis of the Cylinder Gas Film Seal between Dual-Rotor Reverse Shafts Considering Lubrication and Centrifugal Expansion Effects

The Wear of Seal Fins During High-Speed Rub Between Labyrinth Seal Fins and Honeycomb Stators at Different Incursion Rates.

Investigation of Friction Characteristics of Brush Seal with Bulk Porous Medium Approach

Brush seal design and secondary air system modification of a heavy-duty gas turbine to improve the output power

High-speed Abrasion Experimental Research of an Abradable Seal Rubber

Investigation of High-Speed Abrasion Behavior of an Abradable Seal Rubber in Aero-Engine Fan Application

Investigation of High-Speed Rubbing Behavior of Labyrinth-Honeycomb Seal for Turbine Engine Application

Friction and Wear Behaviors of Brush Seal under High Temperature

Theoretical and Experimental Investigation on Tip Forces and Temperature Distributions of the Brush Seal Coupled Aerodynamic Force

Theoretical and Numerical Investigation on the Leakage Characteristics of Brush Seals Based on Fluid–structure Interaction

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Wear and Leakage Behaviors of Brush Seal Considering Eccentricity and Radial Deformation

Evaluation of an AlSi-polyester abradable seal coating performance using high-temperature and high-velocity abrasion tests

High-Temperature And High-Speed Abadable Tester For Abradability Test Of Seal Coatings

Temperature Field and Performance Analysis of Brush Seals Based on FEA-CFD and the Porous Medium of Anisotropic Heat Transfer Models

Flows in Brush Seals Based on a 2-D Staggered Tube Bundle Model

Numerical analysis of brush seal hysteresis based on orthogonal test method

Investigating the Frictional Force Distributions and Inter-Stage Imbalance of a Two-Stage Brush Seal

Study on a Type of Low-Leakage Brush Seal Porous Media Model

Methodology for Counter Torque, Power Loss, and Frictional Heat for Brush Seals Under Eccentric Transients