Abstract:Brush seals have been applied in more and more challenging high-temperature locations. The high speed bristle-rotor friction causes a considerable heat generation which accelerates the bristles wear. The frictional heat generation at bristle-rotor interface becomes another major concern in brush seal applications. This study presented detailed investigations on the heat transfer characteristics and contact mechanics of brush seals using a combined computational fluid dynamics (CFD) and finite element method (FEM) brush seal model. The CFD model of brush seal for mass and heat transfer employed Reynolds-averaged Navier-Stokes (RANS) solutions coupled with non-Darcian porous medium approach. The nonlinear contact model of brush seal was established using FEM with considerations of internal frictions (bristle to rotor, bristle to backing plate, and bristle to bristle) and aerodynamic loads on bristles. The numerical method involved iterations between CFD and FEM models to better evaluate the heat transfer behaviors of the brush seal with consideration of bristle deflections. The frictional heat generation was calculated from the product of bristle-rotor frictional force and sliding velocity. The bristle deflections and temperature distributions of the brush seal were predicted at various operational conditions using the iterative CFD and FEM brush seal model. The effects of pressure differential and rotational speed on the contact behavior, temperature distribution and bristle maximum temperature of brush seals were numerically investigated using the developed approach. The detailed pressure contours and streamline distributions of the brush seal were also illustrated.

Friction and Wear Behaviors of Brush Seal under High Temperature

High-Temperature And High-Speed Abadable Tester For Abradability Test Of Seal Coatings

The Wear of Seal Fins During High-Speed Rub Between Labyrinth Seal Fins and Honeycomb Stators at Different Incursion Rates.

Investigation of High-Speed Abrasion Behavior of an Abradable Seal Rubber in Aero-Engine Fan Application

Tribological Properties of Seals in Integrated Transmission of Vehicle

High-speed Abrasion Experimental Research of an Abradable Seal Rubber

Evaluation of an AlSi-polyester abradable seal coating performance using high-temperature and high-velocity abrasion tests

Advance in the investigation of brush seal

Numerical investigations on the heat transfer behavior of brush seals using combined computational fluid dynamics and finite element method

Investigation of Conjugate Heat Transfer in Brush Seals Using Porous Media Approach under Local Thermal Non-Equilibrium Conditions

Analysis and Experimental Study on Friction and Wear Characteristics of Super High-Speed Mechanical Seal

Theoretical and Experimental Investigation on Tip Forces and Temperature Distributions of the Brush Seal Coupled Aerodynamic Force

Investigations on the heat transfer characteristics of brush seals based on computational fluid dynamics and finite element analysis

Friction and Wear Behavior of Different Seal Materials under Water-Lubricated Conditions

Experimental Investigation on Fiber Thermocouples Used in Brush Seals for Temperature Measurements

Temperature Field and Performance Analysis of Brush Seals Based on FEA-CFD and the Porous Medium of Anisotropic Heat Transfer Models

Investigations on the Leakage and Heat Transfer Characteristics of Brush Seal Part 2: Heat Transfer Characteristics

High Temperature Tribology Behaviors of Brush Plated Ni–W–Co/SiC Composite Coating

Study on Frictional Performance of Mechanical Seal Spare Material Used for Nuclear Coolant Pump

Numerical Simulation of Combustion Resistant Titanium Alloy Wear Behavior at High Temperature Fields

Investigation of Friction Characteristics of Brush Seal with Bulk Porous Medium Approach