Abstract:Optical crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core defects, which severely affect the optical, thermal and mechanical properties of the material. It is well known that the formation of melt inclusion or bubble core is highly related to species distribution in the growth system especially at the solidification interface and the shape of the growth interface. This paper has examined the flow pattern and solidification interface changes by changing the forced convection, e.g., crystal rotation and by changing the natural convection, e.g., inserting a horizontal disk plate. The relative effect of fluid-flow convection modes in the melt associated with crystal rotation rate is represented by a dimensionless parameter, Gr/Re-2. Increasing the rotation rate will cause the solid-liquid interface change from the convex shape to concave. When the crystal rotation rate is relatively low and natural convection is strong, Gr/Re-2 is large. In this case, the concentration of species pertinent to melt inclusion moves down along the axis of rotation. When the crystal rotation rate is increased, the value of Gr/Re-2 decreases. The precipitated composition spreads over the growing interface may then be swiped away from the growth interface by increased crystal rotation. Melt inclusion-free crystals can thus be obtained. The relationship between Gr/Re-2 and growth interface shape change is achieved by numerical simulations. The stagnant point location as a function of crystal rotation is also presented, which shows that the stagnant point moves outward by increasing Reynolds number and/or reducing Grashof number. From such understanding, the interface shape and melt inclusion position can then be controlled through control of Gr/Re-2 in the growth system. Many times, it is, however, not practical in the experiments to use a high rotation rate for optical crystal growth since high rotation rate will introduce the striation defects. A new design to reduce natural convection is then proposed to improve the effect of crystal rotation and to control the solidification interface shape. Numerical simulations have been performed to demonstrate the possibility of the new design. Results show that such design is very effective and practical to control the melt inclusion and the solidification interface shape.

Crystal Size Distribution and Aspect Ratio Control for Rodlike Urea Crystal Via Two-Dimensional Growth Evaluation

Insights into the Stable Preferred Growth Direction of Rods in the Colony of Al2O3/ZrO2 (Y2O3) Eutectics

Controlling three‐dimensional ice template via two‐dimensional surface wetting

Image Enhancement Method for Crystal Identification in Crystal Size Distribution Measurement

Growth of urea crystals with very large cross-sectional area

Estimation of crystal size distribution based on photomicrograph

Crystal growth and morphology control of needle-shaped organic crystals

Control of Crystal Size Distribution using Non-Isothermal Taylor Vortex Flow

Crystal Morphology Prediction Models and Regulating Methods

Designed Growth of Large‐Size 2D Single Crystals

Thiourea crystal growth kinetics, mechanism and process optimization during cooling crystallization

In-Situ Measurement of Particle Length Distribution by FBRM with Application to Needle- or Rod-Shape Crystallization Processes

Control Of Flow Pattern And Solidification Interface Shape In An Induction Heated Czochralski Crystal Growth System

Consecutive Rotation Of Crystallographic Orientation In Lateral Growth

Automatic Diameter Controlling for Crystal Growth with CZ Method

Understanding Anisotropic Growth of Au Penta-Twinned Nanorods by Liquid Cell Transmission Electron Microscopy.

Sensor Fusion and Calibration-Based Adaptive Image Analysis Procedure for In Situ Crystal Size Measurement

Crystal Phase Transition of Urea: What Governs the Reaction Kinetics in Molecular Crystal Phase Transitions.

Critical Size of Secondary Nuclei Determined Via Nucleation Theorem Reveals Selective Nucleation in Three-Component Co-Crystals

Estimation of Particle Size Distribution and Aspect Ratio of Non-Spherical Particles From Chord Length Distribution

Crystal Growth by Unidirectional Method ‐ A Generalized View on the Crystalline Perfection of the Uni‐Indexed, Bi‐Indexed, and Tri‐Indexed Plane Single Crystals