Growth of urea crystals with very large cross-sectional area

Huang Bingrong,Su Genbo,Pan Feng

DOI: https://doi.org/10.1016/0022-0248(91)90128-R

IF: 1.8

1991-01-01

Journal of Crystal Growth

Abstract:If the seeds are selected, prepared carefully, and the supersaturation controlled properly, then urea crystals could be grown for about four months, to give very large cross-sectional areas of crystal.

What problem does this paper attempt to address?

Investigation of Capping Growth of Urea in Different Solvents

Huang Bingrong,Su Genbo,Pan Feng

DOI: https://doi.org/10.1002/crat.2170260632

1991-01-01

Crystal Research and Technology

Abstract:Crystal Research and TechnologyVolume 26, Issue 6 p. K147-K150 Short Note Investigation of Capping Growth of Urea in Different Solvents Huang Bingrong, Huang Bingrong Fujian Institute of Research on the Structure of Matter Fuzhou, Fujian - 350002, P.R. ChinaSearch for more papers by this authorSu Genbo, Su Genbo Fujian Institute of Research on the Structure of Matter Fuzhou, Fujian - 350002, P.R. ChinaSearch for more papers by this authorPan Feng, Pan Feng Fujian Institute of Research on the Structure of Matter Fuzhou, Fujian - 350002, P.R. ChinaSearch for more papers by this author Huang Bingrong, Huang Bingrong Fujian Institute of Research on the Structure of Matter Fuzhou, Fujian - 350002, P.R. ChinaSearch for more papers by this authorSu Genbo, Su Genbo Fujian Institute of Research on the Structure of Matter Fuzhou, Fujian - 350002, P.R. ChinaSearch for more papers by this authorPan Feng, Pan Feng Fujian Institute of Research on the Structure of Matter Fuzhou, Fujian - 350002, P.R. ChinaSearch for more papers by this author First published: 1991 https://doi.org/10.1002/crat.2170260632Citations: 1AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onEmailFacebookTwitterLinkedInRedditWechat References Gaedeke, R., Wold, F., Bernharde, G.: Kristall und Technik 14 (8) (1979) 913 Gaedke, R., Wold, F., Bernharde, G.: Kristall und Technik 15 (5) (1980) 557 Halbout, J. M., Blit, S.: IEEE, QE-15 (1979) 1176–1180 Huang Bingrong et al.: J. Cryst. Growth 102 (1990) 762–764 Huang Bingrong et al.: J. Synthetic Crystals (in Chinese) 15 (1986) 85 Osamu Shimomura: International Workshop Crystal Growth of Organic Materials, Tokyo 1989, p. 66 Citing Literature Volume26, Issue61991Pages K147-K150 ReferencesRelatedInformation
Controllable crystallization of urea (520) crystal plane by molecular simulation

Jingtao CAI,Daixi LI,Baolin LIU,Hansen LUAN,Baisong GUO,Dongqing WEI,Hao WANG

DOI: https://doi.org/10.11949/j.issn.0438?1157.20180521

2019-01-01

Abstract:Due to urea crystallization showing white needle, single crystal morphology and uncontrollable process of traditional crystallization, it seriously affects drug consistency evaluation. We adopt molecular dynamics simulation method to research regulating effect of different additives on urea crystal growth at molecular level, and reveal the regulation mechanism of additives on urea crystal growth. Finally, the experimental results show:①At 101.325 kPa and 290 K, all 6 kinds of additives (trehalose, sucrose, glucose, sorbitol, lysine and arginine) can inhibit the growth of urea facet (520) to a certian extent.②The more negative adsorption energy of the additive on the facet (520) lead to the better inhibition of crystal growth, and the trehalose is the best inhibit for the growth of facet (520).③ The type and number of the polar group which is carried by additive determine the interactive strength between additive and crystal layer. In particular, trehalose and sucrose which contains 8 hydroxyl groups, have strong interaction with urea molecules on the urea layer,and they can form competitive adsorption with solutes in the solution layer. So they can better inhibit the growth of urea crystal facet (520).
Controllable Crystallization of Urea Crystal Face (0 0 1) by Molecular Simulation

Daixi Li,Jingtao Cai,Baisong Guo,Dong‐Qing Wei,Qing Liu,Baolin Liu

DOI: https://doi.org/10.1016/j.jcrysgro.2019.06.025

IF: 1.8

2019-01-01

Journal of Crystal Growth

Abstract:Crystal regulation including crystal habit and size regulation is of considerable significance in chemical and pharmaceutical industry. Here urea is used as a typical crystal model, because crystal formation of urea is simple and its traditional crystallization is uncontrollable. Therefore, we adopted molecular dynamics simulation to study the crystal-solution interface during the urea crystal growth. And the regulation mechanism of additive on urea crystal growth was further revealed by analyzing the adsorption energy, density profile, diffusion coefficient, number of contact and H-bond interaction of four additives (trehalose, sorbitol, glucose, and l-lysine) on the crystal face (0 0 1). The results indicated that to some extent, those additives can do inhibit the growth of urea crystal face (0 0 1) at 1 atm and 290 K. The more negative adsorption energy of the additive on crystal face (0 0 1) can lead to the better inhibitive efficiency. And the trehalose is one of the best inhibitors for the growth of crystal face (0 0 1). The type and number of the polar group carried by additives determine their regulation capability.
Growth of Centimeter-Sized C60 Single Crystals

HN Li,YB Xu,JH Zhang,PM He,HY Li,TQ Wu,SN Bao

2001-01-01

Abstract:C-60 single crystals larger than one centimeter in size are grown with vapor method by nucleation control and by a proper time-dependent temperature process which allows only one nucleus growing larger and larger. X-ray diffraction patterns exhibit the high quality of the sample. As an example of the applications of large single C-60 crystals, synchrotron radiation photoemission spectra are measured to investigate the fine structure of valence bands of C-60 crystals.
Grow Large High-Quality Diamonds with Different Seed Surfaces

Masafumi Hongan,Zang Chuan-yi,Xiao Hong-Yu,Jia Xiao-peng,Tian Yu,Li Shangsheng

DOI: https://doi.org/10.1088/0256-307X/23/1/062

Abstract:Large high-quality type Ib diamond crystals have been grown with different seed surfaces by temperature gradient method at 5.5 GPa, 1500–1600 K, with NiMnCo alloy as the metal solvent. Compared with {100} as the growth surface, the growth region of large high-quality diamond crystals with {111} as the growth surface at a higher growth rate shifts markedly from lower temperatures (suitable for {100}-facet growth) to higher temperatures (suitable for {111}-facet growth). However, regardless of different growth surfaces, {100} or {111}, the grown crystals of sheet-shaped shape are most difficult for metal inclusions to be trapped into, and whether or not matched growth between the seed surfaces and the growth temperatures determines the crystal shapes. In view of the growth rates, large high-quality diamond crystals of sheet-shaped shapes can be grown at a growth rate of above 2.5 mg/h, while the growth rate of large high-quality diamond crystals should not be beyond 1.5 mg/h for tower-shaped crystals.

Physics,Materials Science
Water-assisted growth of large-sized single crystal hexagonal boron nitride grains

Lifeng Wang,Bin Wu,Hongtao Liu,Li Huang,Yongtao Li,Wei Guo,Xin Chen,Peng Peng,Lei Fu,Yunchang Yang,PingAn Hu,Yunqi Liu

DOI: https://doi.org/10.1039/C7QM00100B

IF: 8.6834

2017-01-01

Materials Chemistry Frontiers

Abstract:Growth control over the size and shape of two-dimensional hexagonal boron nitride domains is vital for its applications. Here we develop a rational water-assisted chemical vapor deposition method that allows fast growth of large-sized (more than 330 μm) single crystal domains, which are 3–5 times larger than those previously grown on solid Cu or Cu–Ni alloy. Further kinetic control results in the perfect evolution of the domain shape from negatively curved triangle, triangle, positively curved triangle, regular hexagon, polygon, to circle. This work addresses the existing major problems, paving a way for the synthesis of materials with better control.
Growth and inhibition of monohydrate sodium urate banded spherulites

Yao Zhou,Xiaowei Feng,Ting Wang,Yang Tian,Xiaoyan Cui

DOI: https://doi.org/10.1039/d0ce01378a

IF: 3.756

2021-01-01

CrystEngComm

Abstract:The growth and inhibition of banded monosodium urate spherulites are explored in detail.

chemistry, multidisciplinary,crystallography
Growth of Equally-Sized Insulin Crystals

Christo N. Nanev,Vesselin D. Tonchev,Feyzim V. Hodzhaoglu

DOI: https://doi.org/10.48550/arXiv.1301.2211

2013-01-11

Abstract:Guidelines for growing insulin crystals of a uniform size are formulated and tested experimentally. A simple theoretical model based on the balance of matter predicts the time evolution of the crystal size and supersaturation. The time dependence of the size is checked experimentally. The experimental approach decouples crystal nucleation and growth processes according to the classical nucleation-growth-separation principle. Strict control over the nucleation process is exerted. Crystalline substance dispersity is predetermined during the nucleation stage of a batch crystallization process. To avert nutrition competition during the crystal growth stage, the number density of nucleated crystals is preset to be optimal.

Materials Science,Biological Physics
Seeded Growth of AlN Crystals on Nonpolar Seeds Via Physical Vapor Transport

D. Zhuang,Z. G. Herro,R. Schlesser,B. Raghothamachar,M. Dudley,Z. Sitar

DOI: https://doi.org/10.1007/s11664-006-0141-x

IF: 2.1

2006-01-01

Journal of Electronic Materials

Abstract:Seeded growth of AlN single crystals was demonstrated in an induction-heated, high-temperature reactor via a physical vapor transport (PVT) process. AlN seeds were prepared from a self-seeded boule containing large single-crystalline grains. Seeded growth was interrupted several times in order to refill the AlN powder source, and a dedicated process scheme was used to ensure epitaxial growth on the seed surface, after prior exposure to air. The growth temperatures were in the range of 2200–2300°C, and the reactor pressure was in the range of 500–900 torr of UHP-grade nitrogen during each growth run. Under these growth conditions, a seed (10 mm diameter) expanded at an angle of 45°, and a larger single crystal up to 18 mm in diameter was obtained. The as-grown surface had three facets, of which facet (1120) was smooth and featureless while the other two, (4150) and (2570), showed serrated morphologies. The double-crystal x-ray rocking curve and glow discharge mass spectroscopy analysis confirmed that the grown crystal was of high crystalline quality with low impurity incorporation.
Critical Size of Secondary Nuclei Determined Via Nucleation Theorem Reveals Selective Nucleation in Three-Component Co-Crystals

Yang Gao,Baohua Guo,Jun Xu

DOI: https://doi.org/10.3390/e21111032

IF: 2.738

2019-01-01

Entropy

Abstract:The critical size of the secondary nuclei plays an important role in determining the crystal growth rate. In the past, the Nucleation Theorem has been applied to determine the number of molecules in the critical nuclei of a single-component crystal via variation of the crystal growth rate with dilution by the non-crystallizable component. In this work, we extend the method to the three-component co-crystal poly (ethylene oxide)/urea/thiourea inclusion compound. The theoretical crystal growth kinetics were deduced and the dependence of the radial growth rate of the inclusion compound spherulites on the mass fraction of urea in urea/thiourea was measured. The results reveal that the secondary nuclei of the poly (ethylene oxide)/urea/thiourea inclusion compound consist mainly of ethylene oxide repeating units and urea molecules. We propose that only urea molecules and ethylene oxide repeating units are selected to form the secondary nuclei while co-crystallization of the three components happens at the lateral spreading stage. As a result, the composition of the critical secondary nuclei is different from that of the bulk inclusion compound crystals. The work is expected to deepen our understanding of the nucleation of multi-component co-crystals.
Effect of Seed Loading and Cooling Rate on Crystal Size and Shape Distributions in Protein Crystallization - A Study Using Morphological Population Balance Simulation

Jing J. Liu,Cai Y. Ma,Yang D. Hu,Xue Z. Wang

DOI: https://doi.org/10.1016/j.compchemeng.2010.06.020

IF: 4.13

2010-01-01

Computers & Chemical Engineering

Abstract:A morphological population balance model is applied to crystallization of hen-egg white lysozyme for investigation of the effect of seed loading and cooling rate on supersaturation, and crystal size and shape distributions. Growth rates of individual faces and final crystal size and shape distributions were examined under varied seeding and cooling conditions. It was found that for growth only crystallization, desired crystal size and shape can be obtained by coordinative manipulation of the seed loading and cooling rate: low seed loading and high cooling rate lead to large crystals of low aspect ratio, but care has to be taken to avoid nucleation and major shape change such as width becoming larger than the length. The interesting results not only demonstrate the effectiveness of morphological population balance simulation for protein crystallization but also provide useful knowledge for process optimization and control.
Structural transformation of Au seeds: the influence of temperature and surfactants

Juan Xu,Caixia Kan,Yeke Lou,Yang Liu,Yuan Ni,Shanlin Ke,Changshun Wang,Xingzhong Zhu,Zixin Chen

DOI: https://doi.org/10.1117/1.jnp.14.016004

IF: 1.179

2020-01-16

Journal of Nanophotonics

Abstract:In the seed-mediated growth process of Au nanostructures, the uniformity and structures of the ultrafine seeds determine the purity and structures of the final Au products. Based on the highly shape-dependent surface plasmon resonance properties of Au nanostructures, we present the structures and structural transformation of Au seeds that have overgrown into Au nanostructures. The optical spectra and transmission electron microscopy images of the final product reflected that structures of the ultrafine seed are sensitive to the temperature and surfactants. It is found that the single-twinned Au seeds obtained at 30°C will transform into fivefold-twinned crystals at 90°C, which subsequently grow into Au nanobipyramids with a high surface plasmon resonance quality factor. The introduction of sodium citrate is beneficial for the formation of twinned crystal seeds. Hexadecyltrimethylammonium chloride can be used to keep the size of seeds small enough to allow Ostwald ripening at the initial heat treatment stage.

optics,nanoscience & nanotechnology
Recent Advances in Growth of Large‐Sized 2D Single Crystals on Cu Substrates

Yixuan Fan,Lin Li,Gui Yu,Dechao Geng,Xiaotao Zhang,Wenping Hu

DOI: https://doi.org/10.1002/adma.202003956

IF: 29.4

2020-11-16

Advanced Materials

Abstract:<p>Large‐scale and high‐quality 2D materials have been an emerging and promising choice for use in modern chemistry and physics owing to their fascinating property profile. The past few years have witnessed inspiringly progressing development in controlled fabrication of large‐sized and single‐crystal 2D materials. Among those production methods, chemical vapor deposition (CVD) has drawn the most attention because of its fine control over size and quality of 2D materials by modulating the growth conditions. Meanwhile, Cu has been widely accepted as the most popular catalyst due to its significant merit in growing monolayer 2D materials in the CVD process. Herein, very recent advances in preparing large‐sized 2D single crystals on Cu substrates by CVD are presented. First, the unique features of Cu will be given in terms of ultralow precursor solubility and feasible surface engineering. Then, scaled growth of graphene and hexagonal boron nitride (<i>h</i>‐BN) crystals on Cu substrates is demonstrated, wherein different kinds of Cu surfaces have been employed. Furthermore, the growth mechanism for the growth of 2D single crystals is exhibited, offering a guideline to elucidate the in‐depth growth dynamics and kinetics. Finally, relevant issues for industrial‐scale mass production of 2D single crystals are discussed and a promising future is expected.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Equipment and Technology Research for Large Scale Preparation of Ammonium Diuranate Microspheres

Xingyu ZHAO,Jingtao MA,Shaochang HAO,Changsheng DENG

DOI: https://doi.org/10.13957/j.cnki.tcxb.2018.03.013

2018-01-01

Abstract:In this paper, external gelation process line established by INET (Institute of Nuclear and New Energy Technology,Tsinghua University) was introduced, which was used for the preparation of ammonium diuranate gel microspheres with 3 kg U each batch. The innovative integrated dissolving, cooking and dispersing equipment, AWD (aging, washing and drying) device and vibrating separator were introduced. And based on the key equipment, acid-deficient dissolution, precipitation problems in the boiling process, effects of nozzle diameter and AWD process on balling performance were studied. Finally, ammonium diuranate gel microspheres with qualified diameters were successfully produced using the newly developed scale-up equipment and process, and prepared for the rest of the dry process and the resulting qualified UO2 kernels.
Preparation of Poly(butylene Succinate) Crystals with Exceptionally High Melting Point and Crystallinity from Its Inclusion Complex

Hai-Mu Ye,Xiao-Tong Chen,Ping Liu,Shu-Yi Wu,Zhiyong Jiang,Bijin Xiong,Jun Xu

DOI: https://doi.org/10.1021/acs.macromol.7b00656

IF: 5.5

2017-01-01

Macromolecules

Abstract:We successfully developed an effective strategy for preparing poly(butylene succinate) (PBS) material with exceptionally high crystallinity (94.4% from density data) and melting point (similar to 136 degrees C) from its urea inclusion complex under normal air pressure for the first time. The strategy consists of three steps: co-electrospinning PBS with urea, thermal treatment, and coalescence of PBS in water. Electrospinning provides well physical mixing between PBS and urea. Thermal treatment causes the assembly of PBS and urea and leads to formation of their inclusion complex, in which PBS chains are separately isolated in urea channels. During the coalescing process the isolated and ordered PBS chains formed crystals with lamellar thickness larger than 26 nm-larger than 5-fold of common PBS crystal-after removing host urea frames. PBS crystals obtained with such high crystallinity and melting point are proved to be the extended-chain crystals (ECCs). Comparative study reveals that the electrospinning and thermal treatment process are necessary in this strategy for preparation of ECC although many other methods can be also used to obtain inclusion complex. Further study shows that the strategy is also feasible for obtaining ECCs of other aliphatic polyesters.
Study of the Crystal Growth Mechanism and Critical Secondary Nucleus Size of Poly(ethylene Oxide)/urea Inclusion Compound

Yang Gao,Shujing Zhang,Jiaxin Shi,Baohua Guo,Jun Xu

DOI: https://doi.org/10.1021/acs.cgd.9b00289

IF: 4.01

2019-01-01

Crystal Growth & Design

Abstract:This study focuses on the crystal growth mechanism and the critical nucleus size of the inclusion compound formed between poly(ethylene oxide) and urea (PEO-U-IC) beta spherulites crystallized from the melt. The surface nucleation mechanism during the crystal growth process is proposed based on the exponential dependence of the spherulite radial growth rate G on the negative reciprocal of product of the isothermal crystallization temperature multiplied by the degree of super-cooling (-1/(T-c Delta T)). The radial growth rates G of PEO-U-IC beta spherulites crystallized from the mixed melt with the gradual addition of the diluting agent N,N'-dimethyl urea (2MeU) were measured under a polarized optical microscope. On the basis of the first nucleation theorem proposed by Kashchiev, the critical secondary nucleus size n* during the surface nucleation is determined from the slope of linear fitting line of ln G versus ln x, where x is the mass fraction of urea in U/2MeU. The critical secondary nucleus consists of 3-9 entities with each entity of the inclusion compound crystal containing 1 urea and 1.5 ethylene oxide repeating units when the crystallization temperature ranges from 65 to 85 degrees C. The relationship that n* is proportional to 1/(Delta T)(2) confirms that the critical secondary nuclei at the solid melt interface are two-dimensional.
Design and Optimization of Thermal Field for PVT Method 8-Inch SiC Crystal Growth

Shengtao Zhang,Guoqing Fu,Hongda Cai,Junzhi Yang,Guofeng Fan,Yanyu Chen,Tie Li,Lili Zhao

DOI: https://doi.org/10.3390/ma16020767

IF: 3.4

2023-01-13

Materials

Abstract:As a wide bandgap semiconductor material, silicon carbide has promising prospects for application. However, its commercial production size is currently 6 inches, and the difficulty in preparing larger single crystals increases exponentially with size increasing. Large-size single crystal growth is faced with the enormous problem of radial growth conditions deteriorating. Based on simulation tools, the physical field of 8-inch crystal growth is modeled and studied. By introducing the design of the seed cavity, the radial temperature difference in the seed crystal surface is reduced by 88% from 93 K of a basic scheme to 11 K, and the thermal field conditions with uniform radial temperature and moderate temperature gradient are obtained. Meanwhile, the effects of different processing conditions and relative positions of key structures on the surface temperature and axial temperature gradients of the seed crystals are analyzed in terms of new thermal field design, including induction power, frequency, diameter and height of coils, the distance between raw materials and the seed crystal. Meanwhiles, better process conditions and relative positions under experimental conditions are obtained. Based on the optimized conditions, the thermal field verification under seedless conditions is carried out, discovering that the single crystal deposition rate is 90% of that of polycrystalline deposition under the experimental conditions. Meanwhile, an 8-inch polycrystalline with 9.6 mm uniform deposition was successfully obtained after 120 h crystal growth, whose convexity is reduced from 13 mm to 6.4 mm compared with the original scheme. The results indicate that the optimized conditions can be used for single-crystal growth.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Growth Mechanism of Large-Size Rubrene Single Crystals Grown by A Solution Technique

Pengqiang Zhang,Xionghui Zeng,Jiancheng Deng,Kai Huang,Feng Bao,Yongxin Qiu,Ke Xu,Jinping Zhang

DOI: https://doi.org/10.1143/jjap.49.095501

IF: 1.8

2009-01-01

Journal of Crystal Growth

Abstract:Large-size and high-quality rubrene single crystals have been grown by a solution technique. The biggest crystal has 4 mm dimension. Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy both indicate that the crystals obtained are pure rubrene and did not incorporate the solvent at the detection level. The morphology of surface and transect of the rubrene single crystals was observed by optical microscope, atomic force microscope (AFM), and scanning electron microscope (SEM). Three-dimensional nucleation was happened on the surface of single crystals. The array of small and large straight steps was observed on the surface of the rubrene single crystals. Layer-like structures were also observed on the cross-section of single crystals. All results indicate that each large step is most probably formed from the piling of small steps and the growth mechanism of rubrene crystals grown from solution is probably a three-dimensional nucleation–layer-by-layer periods growth.
Preparation of Monocrystal Cu or Polycrystal Cu with Large Grain by Abnormal Grain Growth

CHEN Mingli,YIN Fucheng,HE Xu,SHEN Yao,WAN Haibo

DOI: https://doi.org/10.14158/j.cnki.1001-3814.2012.18.025

2012-01-01

Abstract:A convenient and rapid method according to abnormal grain growth of polycrystal copper without any impurities polluting was utilized to obtain monocrystal copper of small dimensions or polycrystal copper with minority large grains.The largest grain size obtained in experiments is almost 5.5mm and a chip of small monocrystal copper with the linear of 2～3mm can be obtained.The optical microscope was used to observe the abnormal grain growth of bulk polycrystal Cu compressed at room temperature.The relationship between the grain size of abnormal growth grain and deformation,together with the annealing temperature was analyzed.Meanwhile,the relation between abnormal grain growth and the topography of grain boundary was investigated.With the limit of the temperature allowing abnormal growth of the grains,the grain size of the abonormal growth grain increases with the decrease of the deformation and annealing temperature.The abnormal grain growth is related to two-dimensional nucleation of boundary steps growth mechanism and anisotropy of grains with facing grain boundaries.
A Method for Preparing Superconducting Single Crystals of Ba2GdCu3O7−y

RX WAN,GM ZHAO,XM TANG,WZ LI,SZ HU,HN YAO

DOI: https://doi.org/10.1063/1.341378

IF: 2.877

1988-01-01

Journal of Applied Physics

Abstract:A method has been developed for growing single crystals of Ba2GdCu3O7−y of much larger size (∼2×3×6 mm3). The crystals as grown were semiconductors and became superconductors with a zero resistance temperature of 92 K after they were annealed in flowing oxygen. Good x-ray diffraction and Laue patterns were obtained from a superconducting crystal (∼2×3×4 mm3) that was cleaved in (001) plane, and lattice constants were determined to be a=3.8401 Å, b=3.9007 Å, and c=11.7104 Å.

Growth of urea crystals with very large cross-sectional area

Investigation of Capping Growth of Urea in Different Solvents

Controllable crystallization of urea (520) crystal plane by molecular simulation

Controllable Crystallization of Urea Crystal Face (0 0 1) by Molecular Simulation

Growth of Centimeter-Sized C60 Single Crystals

Grow Large High-Quality Diamonds with Different Seed Surfaces

Water-assisted growth of large-sized single crystal hexagonal boron nitride grains

Growth and inhibition of monohydrate sodium urate banded spherulites

Growth of Equally-Sized Insulin Crystals

Seeded Growth of AlN Crystals on Nonpolar Seeds Via Physical Vapor Transport

Critical Size of Secondary Nuclei Determined Via Nucleation Theorem Reveals Selective Nucleation in Three-Component Co-Crystals

Effect of Seed Loading and Cooling Rate on Crystal Size and Shape Distributions in Protein Crystallization - A Study Using Morphological Population Balance Simulation

Structural transformation of Au seeds: the influence of temperature and surfactants

Recent Advances in Growth of Large‐Sized 2D Single Crystals on Cu Substrates

Equipment and Technology Research for Large Scale Preparation of Ammonium Diuranate Microspheres

Preparation of Poly(butylene Succinate) Crystals with Exceptionally High Melting Point and Crystallinity from Its Inclusion Complex

Study of the Crystal Growth Mechanism and Critical Secondary Nucleus Size of Poly(ethylene Oxide)/urea Inclusion Compound

Design and Optimization of Thermal Field for PVT Method 8-Inch SiC Crystal Growth

Growth Mechanism of Large-Size Rubrene Single Crystals Grown by A Solution Technique

Preparation of Monocrystal Cu or Polycrystal Cu with Large Grain by Abnormal Grain Growth

A Method for Preparing Superconducting Single Crystals of Ba2GdCu3O7−y