Abstract:Magnesium matrix composites are extensively used in automotive and structural applications due to their low density, high strength, and wear-resistant properties. To reach the scope of industry needs, research is carried out regarding enhancing the mechanical and tribological behavior of the magnesium composites by reinforcing the nano-sized reinforcements. In the present work, research has been carried out to enhance the properties of the magnesium AZ91D hybrid composite by reinforcing carbon fibers (CFs) and multi-walled carbon nanotubes (MWCNTs) with varying weight percentages (AZ91D + 0.5% CF's + 0.5% MWCNT and AZ91D + 0.75% CF's + 0.75% MWCNT, respectively). The experimental tests were carried out to evaluate the mechanical and tribological behavior of the composites. The test results showed that the addition of CF and MWCNT reinforcements improved the hybrid Mg composite's hardness, tensile strength, and impact strength compared to the base Mg matrix. The AZ91D + 0.75% CF's + 0.75% MWCNT hybrid composite showed a 19%, 35%, and 66% increased hardness, tensile strength, and impact strength, respectively, compared to the base Mg AZ91D. The wear test results also showed the improved wear resistance of the Mg composite compared to the base matrix. The enhanced wear resistance of the composite is due to the addition of hard MWCNT and CF reinforcements. The wear rate of the AZ91D + 0.75%CF's + 0.75% MWCNT composite for a load of 30 N at a sliding distance of 1500 m is lower as compared to the base matrix. The SEM micrographs of the worn surfaces revealed the existence of abrasive wear. The improved mechanical and tribological behavior of the magnesium composite is also due to the homogeneous distribution of the hard reinforcement particles along the grain boundaries.

Tribological Behavior of Carbon Nanotube-Reinforced AZ91D Composites Processed by Cyclic Extrusion and Compression

Mechanical properties and fabrication of carbon nanotubes reinforced AZ91D magnesium matrix nanocomposites

Fabrication of Carbon Nanotubes Reinforced AZ91D Composites by Ultrasonic Processing

Effect of CNTs on microstructure, mechanical and wear properties of the AZ91–3B 4 C–3SiC– x CNTs composites

Effects of Cyclic Extrusion and Compression on the Microstructure and Mechanical Properties of AZ91D Magnesium Composites Reinforced by SiC Nanoparticles

Damping characterization and its underlying mechanisms in CNTs/AZ91D composite processed by cyclic extrusion and compression

Toughening and strengthening of Cu-coated carbon nanotubes reinforced AZ61 magnesium matrix nanocomposites by improving interfacial bonding

Distribution and Integrity of Carbon Nanotubes in Carbon Nanotube/Magnesium Composites

Effects of Cyclic Closed-Die Forging on the Microstructural Evolution and Mechanical Properties of SiC/AZ91D Nanocomposites

Microstructures and Mechanical Properties of Carbon Tubes Reinforced AZ91D Magnesium Matrix Composites Prepared by Squeeze Casting

Microstructure and Strengthening Mechanism of Carbon Nanotubes Reinforced Magnesium Matrix Composite

Microstructure, Interface and Strengthening Mechanism of Ni-CNTs/AZ91 Magnesium Matrix Composites

Characterization and Strengthening Mechanism of CNT/TiB2 Particulates added AZ91D Composites

Effect of Multi-Walled Carbon Nanotubes and Carbon Fiber Reinforcements on the Mechanical and Tribological Behavior of Hybrid Mg-AZ91D Nanocomposites

Fabrication and Mechanical Properties of CNTs/Mg Composites Prepared by Combining Friction Stir Processing and Ultrasonic Assisted Extrusion

Enhancement of thermal–mechanical performances via a selective CNTs configuration in laminated CNTs/AZ31B composite

Evolution of Microstructure, Texture and Mechanical Properties for Multilayered Al Matrix Composites by Accumulative Roll Bonding

Developing Fittingly Comprehensive Performance Carbon Nanotube/Mg-6Zn Sheets with Substantial Enhancement in Formability

Effect of Carbon Nanotube (CNT) Content on the Properties of In-Situ Synthesis CNT Reinforced Al Composites

Influence of Soft Phase and Carbon Nanotube Content on the Properties of Hierarchical AZ61 Matrix Composite with Isolated Soft Phase

An Improved Approach to Manufacture Carbon Nanotube Reinforced Magnesium AZ91 Composites with Increased Strength and Ductility