Abstract:Micro-electro-mechanic-system (MEMS) devices on flexible substrate are important for non-planar and non-rigid surface applications. In this paper, a novel and cost-effective fabrication process for an 8×8 MEMS temperature sensor array with a lateral dimension of 2.5mm×5.5mm on a polyimide flexible substrate is developed. A 40μm thick polyimide substrate is formed on a rigid silicon wafer using as a mechanical carrier throughout the fabrication by four successive spin coating liquid polyimide. The arrayed temperature sensing elements made of 1200Å sputtered platinum thin film on polyimide substrate show excellent linearity with a temperature coefficient of resistance of 0.0028/°C. The purposed sensor obtains a high sensitivity of 0.781Ω/°C at 8mA at constant drive current. Because of the low heat capacity and excellent thermal isolation, the temperature sensing element shows excellent high sensitivity and a fast thermal response. The finished devices are flexible enough to be folded and twisted achieving any desired shape and form. Employing spin-coated liquid polyimide substrate instead of solid polyimide sheet minimizes the thermal cycling as well as improves the production yield. This fabrication technique first introduces the spin-coated PDMS (Polydimethylsiloxane) interlayer between the silicon carrier and the polyimide substrate and makes the polyimide-based devices separate much easier and greatly simplifies the fabrication process with a high production yield. A non-successive two-stage cure procedure for the polyimide precursor is developed to meet low-temperature requirement of the PDMS interlayer. The fabrication procedure developed in this research is compatible with conventional MEMS technology through an optimized integration process. The novel flexible MEMS technology can benefit the development of other new flexible polyimide-based devices.

A Novel Polyimide Based Micro Heater with High Temperature Uniformity

A Novel Micro Heater Integrated On Flexible Polyimide Substrate With Fast Response And Uniform Temperature Distribution

Design and Fabrication of a MEMS Heater with the Improved Double-Spiral Structure

A Novel Flexible Silver Heater Fabricated by a Solution-Based Polyimide Metalization and Inkjet-Printed Carbon Masking Technique

Microheaters Fabricated from a Conducting Composite

Ultrahigh-Temperature-Tolerant NiO@Ag NW-Based Transparent Heater with High Stability, Durability, Ultraflexibility, and Quick Thermal Response

Development of a High Throughput Micro-Heater Array with Controllable Temperature for Each Heating Unit

Characterization of a Novel Microhotplate for Application in a Silicon-Based Nanofilm Gas Sensor

Hot Embossing and Thermal Bonding of Poly(methyl Methacrylate) Microfluidic Chips Using Positive Temperature Coefficient Ceramic Heater

Development of a Microheater with a Large Heating Area and Low Thermal Stress in the Heating Area

A Performance-Enhanced Liquid Metal-Based Microheater with Parallel Ventilating Side-Channels

A Novel Fabrication Process of MEMS Devices on Polyimide Flexible Substrates

Design and Thermal Analysis of Flexible Microheaters

Miniaturized 3-D Solenoid-Type Micro-Heaters in Coordination with 3-D Microfluidics

Key Technology of Micromachined Temperature Sensor Arrays on Polyimide Flexible Substrates

Microheater: material, design, fabrication, temperature control, and applications-a role in COVID-19

Polydimethylsiloxane microfluidic chip with integrated microheater and thermal sensor.

Al doped poly-Si micro-heater for thermomechanical fabrication of micro/nano structure

Research on Shape-Controllable Localized Heating Method Driven by Digital Microfluidics.

Portable Flexible Spherical Origami Joule‐Heaters with Aerogel

Novel design and characterisation of SOI CMOS micro-hotplates for high temperature gas sensors