Abstract:Removal and sequestration of CO2 from flue gas has been proposed as one of the most reliable solutions to mitigate globe greenhouse emissions. Adsorption technology based on porous adsorbent is known to be one of the most efficient processes for the CO2 capture from flue gas. The key issue of this technology is to find the adsorbent with high adsorption capacity and selectivity for CO2. In this chapter, both the experimental and the computer simulation works about the CO2 adsorption behavior on porous materials in our laboratory were introduced. In the experimental works, the mesoporous materials such as MCM-41 and SBA-15 were selected as the fundamental adsorbent. After surface modification by aminosilane, the amine groups became active centers and the CO2 adsorption capacity was obviously increased due to the chemisorption. It is shown that the dual amine groups of AEAPMDS had better effect on CO2 adsorption than the single amine group of APTS. The best CO2 adsorption capacity of MCM-41-AEAPMDS was 2.20 mmol.g(-1) at room temperature. Another effective way was incorporation metal Mg into the mesoporous materials. By various impregnating or doping methods, such as the co-condensation, the dispersion with the enhancement of Al3+ or amine, and the ionic exchange, a suitable amount of Mg2+ can be successfully introduced into MCM-41 and SBA-15, which effectively increased the CO2 adsorption capacity. Different pore structures had their corresponding optimized methods, the real reason behind was the highly dispersed MgO state in the channels. The best CO2 adsorption capacities of Mg-Al-SBA-15-D1 and Mg-EDA-MCM-41-D10 were about 1.35 mmol.g(-1). In the simulation works, some novel porous materials such as the micro/mesoporous composite, the covalent organic frameworks, the metal organic framework and the zeolitic imidazolate frameworks were selected as the potential adsorbents for the CO2 capture. The CO2 adsorption behavior of the zeoilte of MFI, the mesoporous MCM-41 and the micro/mesoporous composite of MFI/MCM-41 were simulated and compared. It is revealed that the micro/mesoporous composite had better performances on the CO2 adsorption capacity and selectivity at high pressure, as well as the diffusion performance.

Co2 Removal in A Packed Tower with Two Different Fillers

Anion Pillared Metal–Organic Framework Embedded with Molecular Rotors for Size-Selective Capture of CO2 from CH4 and N2

Mass Transfer Performance of Structured Packings in a CO2 Absorption Tower

Pillared-layer Ultramicroporous Material for Highly Selective SO2 Capture from CO2 Mixtures

CO2 Removal from Air by Hollow-fiber Membrane-based Absorption System

Comparison of several packings for CO2 chemical absorption in a packed column

Mass transfer performance of metal sheet structured packings in CO2 absorption tower

Experimental study of CO 2 absorption in a diameter-varying spray tower

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Experimental study of a hybrid solvent MEA-Methanol for post-combustion CO2 absorption in an absorber packed with three different packing: Sulzer BX500, Mellapale Y500, Pall rings 16 × 16

Orthogonal Test Design to Optimize the Operating Parameters of a Hybrid Solvent MEA–Methanol in an Absorber Column Packed with Three Different Packing: Sulzer BX500, Mellapale Y500 and Pall Rings 16 × 16 for Post-Combustion CO2 Capture

Enhancing CO 2 Absorption with Compact Multiflow Absorber: Evaluation of Operational Factors

Study on Co2 Absorption by Aqueous Benzylamine and Its Formulations with Monoethanolamine As A Component for Post-Combustion Capture Process

Liquid Film Characteristics on Surface of Structured Packing

Performance of CO2 Absorption in a Diameter-Varying Spray Tower

Experimental Study On Efficient Absorption Of Carbon Dioxide From Simulation Flue Gas By Rotary Packed Bed

Pore Structure Modified CaO-Based Sorbents with Different Sized Templates for CO2 Capture

Co2 Adsorption on Porous Materials: Experimental and Simulation Study

Effect of Fly Ash on the Mass Transfer Performance of CO2 Removal Using MEA and DEA Solutions in a Packed Tower

Influence of liquid viscosity on mass transfer of structured packing in CO2 absorber

Investigations of CO2 Capture from Gas Mixtures Using Porous Liquids