Abstract:Distillation units require huge amounts of energy for the separation of the multicomponent mixtures involved in refineries and petrochemical industries. Keeping the same separation standards, energy savings can be achieved in multiple ways. The overall efficiency of the distillation column system is determined from the trade-offs of the Operating Expenditures (OPEX) and Capital investment cost (CAPEX), as there is a strong interaction between the distillation columns and the Heat Exchanger Network (HEN) of the interconnecting streams. Therefore, the highly complex optimization of this trade-off necessitates moving towards process integration solutions. Individually, both distillation columns and HEN are well-defined rigorous problems and numerous methodologies have been developed for finding optimal solutions. The integrative problem however is larger in scale, computational demanding and less robust. In this paper, a systematic optimization methodology for process integration of a multicomponent distillation column complex is presented. The highly nonlinear and time consuming rigorous models of the distillation column are being substituted with simple surrogate models that generate operating responses with adequate accuracy. Moreover, another surrogate model is included in the Mixed Integer Non-Linear Programming (MINLP) formulation to enhance the accuracy of the results by considering the phase changes of the process streams involved in the HEN. The methodology is applied on two case studies of the aromatics separation PARAMAX complex and the results illustrate significant reductions on the Total Annualized Cost. With a scope limited to the benzene and toluene columns, the gain reaches about 15%.

Integration of Heat Exchanger Network Considering the Pressure Variation of Distillation Column

Integration of Heat Exchanger Network Considering the Influence of the Reactor

The Heat Integration of Distillation Column according to the Ground Composite Curves

Novel graphical tool for the design of the heat integrated water allocation networks (vol 62, pg 670, 2016)

New Transshipment Type MINLP Model for Heat Exchanger Network Synthesis

Optimal Process Design for Recovering Effluent Gas at Subambient Temperature

Temperature profile movement investigation and application to a control scheme with corrected set-point for a heat integrated distillation column

Dynamic optimization of operation of heat-integrated distillation column systems

New Insights into T–H/H–F Diagrams for Synthesis of Heat Exchanger Networks Inside Heat Integrated Water Allocation Networks

Graphical Optimization Method for Coupled Heat Exchanger Network and Reactor

Systematic Optimization Methodology for Simultaneous Process Design and Heat Exchanger Network Synthesis with Surrogate Models – Application to Distillation Column Complex

Distillation Parameters Optimization Based on Heat Exchanger Network Integration of Xylene Separation Process

Heat-transfer Distribution Optimization for the Heat-Integrated Air Separation Column

Combined Pinch and Mathematical Programming Method for Coupling Integration of Reactor and Threshold Heat Exchanger Network

Comprehensive Analysis and Targeting of Distillation Integrated into Overall Process Considering Operating Pressure Change

Heat exchanger network optimisation considering different shell-side flow arrangements

A Shortcut Method of Heat Pump Distillation Column System Revamp Based on Exergy Analysis

Synthesis of Heat Exchanger Networks Featuring Batch Streams

Heat Integration of Distillation System Based on Simulation Analysis and Heuristic Approach

Heat exchanger network integration considering flow exergy loss

Synthesis of Large‐scale Heat Exchanger Networks Using a T‐Q Diagram Method