Abstract:Herein, all the possible methods of heat integration to the distillation column in ammonia–water absorption refrigeration cycle are investigated. Further increasing the cycle complexity may not increase the thermal performance too much after reaching the saturation region. A guideline for the selection of suitable cycles with satisfied thermal performance and without too complicated configurations is provided. In this study, a comprehensive method to optimize distillation columns in ammonia–water absorption refrigeration, power, and cogeneration cycles is introduced. The novelty of this work lies in a comprehensive analysis of the distillation column's thermal performance and the introduction of a new design framework that maximizes heat integration. Key findings include the critical role of the solution heat exchanger, especially at lower generation and evaporation temperatures. Using a saturated liquid or two‐phase feed can achieve up to 80% efficiency at a feed composition of 0.3. Moreover, in the results, the substantial potential for improving the coefficient of performance (COP) through strategic design is highlighted. Notably, minimizing the pinch point temperature difference to 0 °C can boost the COP by 6%, while optimal feed placement can increase it by 9%. Incorporating feed preconditioning and side exchangers can lead to a 22% COP enhancement, indicating the significance of heat integration to the distillation column. In this study, a graphic guideline for selecting cycles that can achieve a minimum of 10% COP improvement without introducing unnecessary complexity is delivered and it suggests that distillation columns can be simplified by using a combination of separators, heaters, and coolers in certain cases.

A Shortcut Method of Heat Pump Distillation Column System Revamp Based on Exergy Analysis

Dynamic optimization of operation of heat-integrated distillation column systems

Optimization of Number of Stages for Energy Conservation and Economic Feasibility of the Heat-Integrated Air Separation Column

Optimization of energy-saving distillation system of absorption heat pump based on intermediate heat exchange

Study on Usage Efficiency of Single Screw Compressor's Shaft Power Based on Exergy Analysis Method

Optimization of Internal Thermally Coupled Distillation Columns of Nonideal Mixture

Systematic Optimization Methodology for Simultaneous Process Design and Heat Exchanger Network Synthesis with Surrogate Models – Application to Distillation Column Complex

Heat-transfer Distribution Optimization for the Heat-Integrated Air Separation Column

Economic and Energy-Saving Heat Pump Assisted Triple-Column Pressure-Swing Distillation for the Separation of Methanol/Ethyl Acetate/Methyl Via Thermodynamic Insights and Multi-Objective Optimization

Operation Optimization of Distillation Column Based on Reduced SQP Algorithm and Hybrid Derivative Method

Exergy Efficiency Design For Multi-Stream Plate-Fin Heat Exchangers Based On Entropy Generation Assessment

Economically and thermodynamically efficient heat pump-assisted side-stream pressure-swing distillation arrangement for separating a maximum-boiling azeotrope

Eco-efficient vapor recompression-assisted pressure-swing distillation process for the separation of a maximum-boiling azeotrope

A Modified Exergy Analysis Method for Vapor Compression Systems: Splitting Refrigerant Exergy Destruction

Comprehensive Analysis and Targeting of Distillation Integrated into Overall Process Considering Operating Pressure Change

Thermodynamical Analysis of the Distillation Column for Targeting Minimum Energy in Ammonia–Water Absorption Refrigeration Cycle

Thermodynamic efficiency enhancement of pressure-swing distillation process via heat integration and heat pump technology

Exergy Analysis and Advanced Exergy Analysis of a Novel Power/Refrigeration Cascade System for Recovering Low-Grade Waste Heat at 90–150 °C

Sustainable design and multi-objective optimization of heat pump assisted extractive distillation process for separating a ternary mixture of methyl acetate, tetrahydrofuran and methanol

Analysis of Heat Integration, Intermediate Reboiler and Vapor Recompression for the Extractive Distillation of Ternary Mixture with Two Binary Azeotropes

An energy sustainable approach of heat-pump assisted azeotropic divided wall column based on the organic Rankine cycle