Abstract:A series of small-scale 1 g model tests were conducted using a self-designed pile driving loading model test system to investigate the effect of relative density and cross-section geometry on the development of soil stress around the pile during the penetration of X-section Cast-in-place Concrete (XCC) pile in sand. It is found that the variations of the radial stress Δ σ' r / σ' v0 in the surrounding soil presented a significant “ h / R effect” during the penetration of the XCC pile, indicating that the “ h / R effect”, which was found for circular pile during the penetration of piles, was also observed for the XCC pile. The radial stress distribution along the axial direction of the pile could be divided into three zones, i.e., the pile body region, the pile tip region, and the soil region below the pile tip. The development trend of the radial stress along with soil depth is different in each region. Additionally, the peaks of the radial stresses in the pile tip region were very sensitive to the variations of the relative density of the surrounding soils and the cross-section geometry of the piles, which increased significantly with increasing the relative density and cross-section geometry. The radial stresses Δ σ' r / σ' v0 decreased exponentially as the radial distance r/R increased. The decay rates decreased with increasing the relative densities of the surrounding soils, while increased with decreasing the cross-section geometry parameter of the piles.

Experimental and Analytical Study of X-Section Cast-In-Place Concrete Pile Installation Effect

Large Deformation Finite-Element Simulation of Displacement-Pile Installation Experiments in Sand

Advanced laboratory investigation of axial cyclic loading in silica sands

DEM Study of the Stress Fields Around the Closed-Ended Displacement Pile Driven in Sand

Experimental Studies on Precast Prestressed Concrete Pile to Cip Concrete Pile-Cap Connections

Experimental Study on the Development of Surrounding Soil Stress During XCC Pile Installation in Sand

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Influence of the Penetration of Adjacent X-section Cast-in-place Concrete (XCC) Pile on the Existing XCC Pile in Sand

Seismic Behavior of Cft Column and Steel Pile Footings

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Experimental Study on Vertical and Lateral Behaviour of Open Caisson Foundations in Clay

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Experimental and Theoretical Study for a Displacement-Controlled Design Method of Embedded Cantilever Retaining Walls (Piles)

Performance of X-section Cast-in-place Concrete Piles for Highway Constructions over Soft Clays

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Laboratory Model Study on the Pile-Forming Mechanisms and Bearing Deformation Characteristics of CFA Piles

Experimental and numerical studies on the displacement and load-transfer mechanism of pile-caisson composite structure

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile