Abstract:Displacement mode has a significant influence on the distribution and magnitude of lateral earth pressures and the failure mechanisms of retaining walls. This study performed five model tests to evaluate the responses of coarse sand-backfilled retaining walls under five displacement modes including uniform translation (UT), rotation around the base (RB), rotation around the top (RT), counter-clockwise rotation around the midpoint (RM-CC), and clockwise rotation around the midpoint (RM-C). The measured lateral earth pressures behind each wall were compared with the calculated values using the analytical solutions from the literature. The failure mechanisms of the retaining walls under different displacement modes were evaluated in terms of their backfill deformation and shear strain contours. Test results show that the measured lateral earth pressures at rest and limit equilibrium (LE) had nonlinear distributions, and the RM-C mode resulted in the largest LE earth pressures as compared with the other four modes. The comparisons show that the measured at-rest and LE earth pressures were in good agreement with those calculated by Jaky's method and Harrop-Williams' method, respectively. For the retaining walls under the UT, RB, and RT modes, the required wall movement to reach the LE state was approximately 0.4% H where H is the height of the retaining wall. For the retaining walls under the RM-CC and RM-C modes, the required wall movements above the rotation point and below the rotation point to reach the limit equilibrium were 0.4% H and 0.2% H , respectively. The backfill behind the wall under the RB or RM-C mode showed progressive failure, while the backfill under the UT, RT, or RM-CC mode showed quick failure.

Experimental and Theoretical Study for a Displacement-Controlled Design Method of Embedded Cantilever Retaining Walls (Piles)

Large Deformation Finite-Element Simulation of Displacement-Pile Installation Experiments in Sand

DEM Study of the Stress Fields Around the Closed-Ended Displacement Pile Driven in Sand

Large-Deformation Finite-Element Simulation of Deformation and Strain Fields Resulting from Closed-End Displacement Pile Installation in Sand

Simplified Analysis Method for Evaluating Horizontal Deformation of Single Pile Due to Adjacent Foundation Pit Excavation

Analytical Method for the Deformation-Based Design of Retaining Walls in Asymmetric Excavation

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Dynamic Deformation Control Of Retaining Structures Of A Deep Excavation

STUDY ON THE BEHAVIOR OF CANTILEVER DOUBLE-ROW PILES SUPPORTING DEEP EXCAVATION

Simplified Deformation Analyses of a Single Pile Subjected to Different Deformation Modes of the Pit Enclosure Structure

Experimental investigations of lateral earth pressures behind rigid retaining walls under different displacement modes

On Vertical Dynamic Stability and Cross‐section Optimization of Closed‐ended Hollow Pile by Considering Soil Compaction Effects

Lateral Earth Pressure Considering the Displacement of a Rigid Retaining Wall

Case study of double-row-pile wall

STUDY OF COMPACTING SOIL DISPLACEMENTS AROUND JACKED SINGLE PILE BASED ON EXCESS PORE PRESSURE DISSIPATION

Displacement and Force Analyses of Braced Structure of Deep Excavation Considering Unsymmetrical Surcharge Effect

Experimental and Numerical Study of Braced Retaining Piles with Asymmetrical Excavation

Behavior Analysis of Laterally Loaded Single Pile under Large Deflection

Non-limit passive earth pressure against cantilever flexible retaining wall in foundation pit considering the displacement

Displacement evolution of a creeping landslide stabilized with piles

Elastoplastic Solutions for Single Piles under Combined Vertical and Lateral Loads