Abstract:Composite materials are widely used in aviation, aerospace, and other fields. Poor service conditions, insufficient stiffness or strength of materials and other problems can cause deformation and defects of composite materials, affecting their service life and safety. Optical detection methods can measure composite materials' surface deformation and internal defects separately. However, there is a lack of comprehensive measurement methods for defects and deformation in these optical detection methods. It causes the problems of complicated detection steps, inefficiency in engineering, and is not conducive to in-depth analysis of the detection results. This paper proposes a comprehensive defect and deformation measurement method based on dual-wavelength speckles, which is beneficial for solving the above problems. The measurement system includes four parts: the control module, the speckle binocular vision module for 3D morphology measurement, the speckle interferometry module for internal defect detection, and the data processing module. Firstly, the system should perform trinocular calibration. Then, the control module controls the speckle interferometry module and the speckle binocular vision module to emit lasers with different wavelengths. Speckles of different colors and sizes are formed on the surface of the composite material specimen. The cameras corresponding to the two modules are controlled to capture speckle images. The data processing module processes the speckle images separately to obtain defect and morphology information. It then uses the information fusion algorithm to integrate the 2D defect and 3D morphology information to complete the measurement. Composite material specimens with internal defects of different sizes and shapes were measured. Finally, the comprehensive detection of both internal defects and 3D morphology of composite materials was realized with this method.

The Depth Measurement of Internal Defect Based on Laser Speckle Shearing Interference

A Novel 3D Evaluation Method for Surface Defects Using Broadband Laser-Generated Rayleigh Waves with Wavenumber Analysis.

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Back to Michelson Interferometer: a Precise Inspection System for Industrial Intricate Structures Defect Detection

Detecting features of defect metal based on laser ultrasonic technique

Detection of Defects in Optics Based on Scanning

Internal Defect Detection Method Based on Dual-Channel Speckle Interferometry

Quantitative Analysis on Parameters of a Defect with Speckle Interferometry and Finite Element Optimization Method

Defect and Deformation Comprehensive Measurement Method Based on Dual-Wavelength Speckles

Numerical Analysis of the Measuring Errors in Quantitative Detection of Defects with Shearing Speckle Pattern Interferometry

Full-field Laser Vibration Measurement in NDT Techniques

A Study of Internal Defect Testing with the Laser-Emat Ultrasonic Method.

Measurement of surface rectangular defect depth based on laser-excited transmitted surface waves

Depth localization of subsurface defects by optical dark-field confocal microscopy

Laser-generated Rayleigh Wave for Width Gauging of Subsurface Lateral Rectangular Defects

Noncontact Testing and Imaging of Internal Defects with a New Laser-ultrasonic SAFT Method

Quantitative Detection of the Defects in Thin-Walled Pressure Vessels with Holography and Shearing Speckle Interferometry

Characterization of internal defects in cylindrical components using laser ultrasonic method with a modified SAFT algorithm

Quantitative Detection of Shallow Subsurface Defects by Using Mode-Converted Waves in Time-of-Flight Diffraction Technique

Numerical Simulation of Laser Ultrasound Detection of Small Defect in Metal Plates