Abstract:TiAl-based alloy have potential as high temperature structural materials for aerospace applications, especially for thermal protection systems in aerospace vehicles including skin materials. Unfortunately, the ductility and formability of TiAl-based alloys are rather poor and thus gamma-TiAl sheets or foils are quite difficult to be manufactured by traditional methods and still far from practical applications. In the present work, commercial pure Ti foils and in-house fabricated TiB2/Al composite foils were alternately stacked and rolled to prepare Ti-(TiB2/Al) laminates, and then heat treatment was utilized to make liquid Al react with solid Ti, and finally TiAl-based composite sheet with multi-layer distributed reinforcement TiB2 particles were achieved. This method avoided the direct deformation of brittle TiAl billets and thus the near-net-shape processing of TiAl-based alloys sheets was feasible. Phase transformation and microstructure evolution during heat treatment were investigated and mechanical properties of the resulting micro-laminated TiB2-TiAl composite sheets were evaluated. The results showed that porous TiAl3 layers were produced by the reaction between liquid Al and solid Ti because of Kirkendall effect, and the following densification treatment under 50 MPa at 1300 degrees C for 2 h significantly improved the relative density of material. Subsequently, the reaction diffusion between TiAl3 and residual Ti proceeded in the following heat treatment, and finally fully lamellar (alpha(2)-Ti3Al+gamma-TiAl) layers were obtained. TiB2 particles did not participate in any reaction and remained, and displayed multi layered distribution in the matrix (alpha(2)-Ti3Al+gamma-TiAl) layers. TiB2 rich layer hindered the coarsening of lamellar colony of (alpha(2)-Ti3Al+gamma-TiAl) layer. Tensile properties at 800 degrees C of multi layered TiB2 TiAl composite sheets remarkably increased because of an increase of energy dissipation caused by plastic deformation.

MICROSTRUCTURES AND MECHANICAL PROPERTIES OF TiAl/Ti3Al MULTILAYERED COMPOSITE

PREPARATION AND PROPERTIES OF TiB2/TiAl COMPOSITE SHEETS WITH LAYERED STRUCTURE

Microstructure and Mechanical Properties of Ti/Ti-Al Multi-layered Composite Prepared by EB-PVD

Study on Microstructures and Mechanical Properties of Ti/Ti-Al Microlaminated Composite

Preparation And Mechanical Properties Of Large-Sized Tial/Ti3al Microlaminated Thin Sheets

Structure and Mechanical Properties of Ti/Al Multilayered Composite

Effect of a ductility layer on the tensile strength of TiAl-based multilayer composite sheets prepared by EB-PVD

Microstructure and Mechanical Properties of Ti-Al-Ti-Ti2AlNb Laminated Composites Based on the Ductile-brittle Structure

TiAl-BASED COMPOSITE SHEET WITH MULTI-LAYER DISTRIBUTED REINFORCEMENT PREPARED BY SOLID-LIQUID REACTION

Large-sized TiAl/Ti3Al Multilayer Thin Sheet: Microstructures, Mechanical Properties and Degradation Mechanism

Fabrication, Microstructure Characterization and Fracture Behavior of a Unique Micro-Laminated TiB-TiAl Composites

Interface Characteristics and Mechanical Properties of a Ti–TiAl Laminated Composite

Synthesis and Fracture Characteristics of TiB2-TiAl Composites with a Unique Microlaminated Architecture

Simultaneously Achieving High Tensile Strength and Fracture Toughness of Ti/Ti-Al Multilayered Composites

Preparation and Performance of Large-Sized Ti/Ti-Al Microlaminated Composite

Preparation and Characterization of Novel Ti(Al)–TiB2/Ti3Al Metallic-Intermetallic Laminated Composites

In-Situ Observation of Fracture Behavior of Ti-Aluminide Multi-Layered Composites Produced by a Hybrid Sintering Process

Tensile behavior and fractography of Ti-TiAl multi-layered foil prepared by electron beam physical vapor deposition technology

Microstructure and Elevated-Temperature Mechanical Properties of in Situ Ti2AlNb-reinforced TiAl-matrix Composite Prepared by Powder Metallurgy

Processing and mechanical behavior of laminated titanium–titanium tri-aluminide (Ti–Al3Ti) composites

Synthesis and Mechanical Properties of Innovative (Tib/ti)-Ti3al Micro-Laminated Composites